• 한국소음진동공학회논문집
• /
• 제12권11호
• /
• pp.840-846
• /
• 2002

The vibrational system of this study is consisted of a cantilever pipe conveying fluid, the moving masses upon it and an attached tip mass. The equation of motion is derived by using Lagrange equation. The influences of the velocity and the number of moving masses and the velocities of fluid flow in the pipe have been studied on the natural frequency of a cantilever pipe by numerical method. As the size and number of a moving mass increases, the natural frequency of cantilever pipe conveying fluid is decreased. When the first a moving mass Is located at the end of cantilever pipe, the increasing of the distance of moving masses make the natural frequency increase at first and third mode, but the frequency of second mode is decreased. The variation of natural frequency of the system is decreased due to increase of the number of a moving mass. The number and distance of moving masses effect more on the frequency of higher mode of vibration.

• 한국기계가공학회지
• /
• 제21권1호
• /
• pp.1-7
• /
• 2022

In this study, vibration analysis of washing machine dehydration was carried out using laser sensors. The suspension of the washing machine was attached to a jig developed for this study. In addition, 10 laser sensors were attached to the jig. The channels of each laser sensor are composed of five channels: front, rear, left, right, and upper. Data acquisition equipment was used to obtain sensor data. The measured data were processed using signal processing, and interpolation of the data was performed using MATLAB with robust interpolation. Vibration analysis according to unbalanced mass and sensor attachment points was carried out.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.226-228
• /
• 1994

In this paper, a moving iron core type LOA is designed and analyzed electro-magnetically and is applied to the active control of structural vibration as an active mass driver. Structural vibration is sensored by the accelerometer attached the structure and reduced by the optimally controlled motion of active mass of LOA giving anti-phase inertia farce to the structure. As a result, the basement of the application of LOA as an active mass driver is successfully established.

• 설비공학논문집
• /
• 제24권1호
• /
• pp.16-22
• /
• 2012

Experimental investigations were carried out to examine the heat and mass transfer characteristics of LiCl aqueous solution for a plate heat exchanger type dehumidifier. Cooling dehumidification was adopted vertical type heat exchanger. Also non woven fabric is attached surface of the heat exchanger for spreadability of LiCl aqueous solution. Mass flow-rate of LiCl aqueous solution and concentration were selected as experimental conditions. Also, In this study, the effects of relative humidity of process air and velocity were investigated experimentally. As a result of heat transfer coefficient and mass transfer coefficient of were increased film reynolds number increased. heat transfer coefficient and mass transfer coefficient of LiCl aqueous solution were 0.14~0.24 kW/$m2^{\circ}C$ and $1.3{\times}10-63{\sim}6.2{\times}10-6$ m/s respectively.

• Structural Engineering and Mechanics
• /
• 제65권6호
• /
• pp.761-769
• /
• 2018

In this work, an optimization method of Friction Tuned Mass Damper (FTMD) parameters is presented. Friction tuned mass dampers (FTMD) are attached to mechanical structures to reduce their vibrations with dissipating the vibratory energy through friction between both bodies. In order to exploit the performances of FTMD, the determination of the optimum parameters is recommended. However, the presence of Coulomb's friction force requires the resolution of a non-linear stick-slip problem. First, this work aims at determining the responses of the vibratory system. The responses of the main mass and of the FTMD are determined analytically in the sticking and sliding phase using the equivalent damping method. Second, this work aims to optimize the FTMD parameters; the friction coefficient and the tuned frequency. The optimization formulation based on the Ricciardelli and Vickery method at the resonance frequencies, this method is reformulated for a system with a viscous damping. The inverse problem of finding the FTMD parameters given the magnitude of the force and the maximum acceptable displacement of the primary system is also considered; the optimization of parameters leads to conclude on the favorable FTMD giving significant vibration decrease, and to advance design recommendations.

• 한국패류학회지
• /
• 제24권2호
• /
• pp.153-159
• /
• 2008

중국산 참가리비 어미패의 GSI 월 변화를 보면 2월 중순 17.2 이었고, 3월 중순에는 중국산은 20.2로 채란 가능한 상태였으나 국내산 참가리비의 GSI는 2월 6.9, 3월 10,8로 미숙상태를 보였다. 어미패를 음건 및 자외선 조사 해수를 이용하여 3월 10일 및 15일 2차례에 걸쳐 채란한 결과 총 22,800만개 수정란을 채란하였고, 이중에서 17,728만마리의 D상 부유유생(부화율 77.8%)을 확보하였으며, 실내에서 25일간 사육한 후 안점이 형성된 유생 4,750만마리를 대상으로 채묘기를 넣어 총 185만마리의 부착치패를 채묘하였다. 부착치패는 강릉시험포에서 5-60일간 5단계로 나누어 실내 사육한 후 양양군 수산항내 부착치패 중간양성장으로 이동하여 성장과 생존율을 조사한 결과 실내에서 12일간 사육하여 이동한 부착치패의 생존율이 13.0%로 가장 높았다. 이 기간을 제외하면 실내사육기간이 길수록 생존율이 높았으나 성장차이는 실내사육 기간의 장단과는 상관없이 크지 않았다. 강릉시 사천항 연안에 있는 가리비 양식장에서 인공산 및 자연산 부착치패의 성장 및 생존율을 조사한 결과 양양 수산항 내에서 중간양성을 거치고 7월 10일에 본 장소에 수하한 부착치패의 경우 평균각고는 0.9 mm에서 12월 16일에 24.7 mm로 성장하였고 생존율은 85.0%로 나타난 것에 비하여 현지에서 채묘하여 수하한 자연산의 경우는 시작시 평균각고는 0.6 mm에서 종료시에는 23.9 mm로 성장하였으며 생존율은 85.7%로 인공산과 비슷한 결과를 보였다.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2000년도 추계학술대회
• /
• pp.171-176
• /
• 2000

Bioremediation of hazardous hydrophobic organic compounds, such as polycyclic aromatic hydrocarbons (PAHs), is a major environmental concern due to their toxic and carcinogenic properties. Due to their hydrophobicity, the hydrophobic organic compounds are mainly associated with the soil organic matter or nonaqueous-phase liquids. A major question concerns the relationships between biodegradation and sorption. This work develops and utilizes a non- steady state model for evaluating the interactions between sorption and biodegradation of phenanthrene, a 3-ring PAH compound, in soil-slurry systems. The model includes sorption/desorption of a target compound, its utilization by microorganisms as a primary substrate existing in the dissolved phase and/or the sorbed phase in biomass and soil, oxygen transfer, and oxygen utilization as an electron acceptor. Biodegradation tests with phenanthrene were conducted in liquid and soil-slurry systems. The soil-slurry tests were performed with very different mass transfer rate: fast mass transfer in a flask test at 150 rpm, and slow mass transfer in a roller-bottle test at 2 rpm. In the slurry tests, phenanthrene was degraded more rapidly than in liquid tests, but with a similar rate in both slurry systems. Modeling analyses with several hypotheses indicate that a model without biodegradation of compound sorbed to the soil was not able to account for the rapid degradation of phenanthrene, particularly in the roller bottle slurry test. Reduced mass-transfer resistance to bacteria attached to the soil is the most likely phenomenon accounting for rapid sorbed-phase biodegradation.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.587-592
• /
• 2009

This paper is concerned with the development of linear magnetic actuator for active vibration control. The newly developed linear magnetic actuator consists of permanent magnets and copper coils. On the contrary to the voice-coil type actuator, the linear magnetic actuator utilizes magnetic flux to generate the shaft movement. In this study, experiments on the prototype linear magnetic actuator were carried out to investigate its dynamic characteristics. Block and inertia forces generated by the actuator were measured. The experimental results show that the actuator can be used as both actuator and active tuned-mass damper. The linear magnetic actuator was attached to a cantilever as the active-tuned mass damper and active vibration control experiment was carried out. The experimental results show that the newly developed linear magnetic actuator can be effectively used for the active vibration control of structures.

• 대한기계학회논문집
• /
• 제14권3호
• /
• pp.685-693
• /
• 1990

본 연구에서는 복사열전달 효과를 알아보기 위해 에너지 방정식을 수치적으로 풀었으며, 그 결과를 열전달계수 및 온도의 항으로 나타내었다. 수치 해석적 모델의 검증을 위해 여러사람들이 물질전달과정 해석을 위해 사용한 나프타린 승화법(naphth- alene sublimation technique)을 이용하여 실험을 수행하였다. 또한 실험에 사용된 다공질체(ceramic blocks)의 침투율도 측정하였다.

• 대한기계학회논문집
• /
• 제11권1호
• /
• pp.170-176
• /
• 1987

본 논문에서는 원환 또는 많은 축 대칭 구조물은 가공의 불균일성, 재질의 불 균일성, 불순물 또는 결함의 존재, 부분적인 질량 및 강성의 증감에 의하여 원래 하나 의 모우드로 있었던 모우드의 분리 현상이 일어나고 원주방향, 반경방향의 진동모우드 의 절선(nodal line)과 반절선의 위치가 급격하게 변한다. 그러므로 전체 진동응답 의 양상이 이상화된 원환 또는 축대칭 셸의 경우와 매우 큰 차이를 나타나게 된다. 이러한 현상은 과거종의 진동의 수치해석 및 실험에서 이미 관찰되었으나 현재까지 미 소 비대칭요소를 가지는 축대칭 구조(원환 또는 축대칭 셸)의 이론해 및 근사해에 대 한 연구보고는 매우 적다. 미소 비채칭을 갖는 축 대칭구조의 진동연구의 기본이 되 는 연구로서 축 대칭 셸의 기본요소 중 하나인 원환의 진동에 대한 집중질량의 영향을 이론적으로 규명하고 실험을 통하여 검증하였다.