• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.125-125
• /
• 2003

PZT(Pb(Zr,Ti)O3)는 우수한 강유전 특성을 가지기 때문에 FRAM (Ferroelectric Random Access Memory) 소자에 응용하기 위해 많은 연구가 진행되고 있다. 스퍼터에 의해 증착된 PZT는 처음에 pyrochlore상으로 존재하다가 후 열처리를 통해 이력 특성을 나타내는 perovskite상으로 천이된다. 일반적인 furnace열처리 방법은 고온에서의 장시간 열처리가 요구되고 Pb-loss현상이나 TiO2와 같은 이차상의 생성 그리고 하부 Pt전극의 roughness증가 및 crack과 같은 문제점이 있다. 최근 들어 후 열처리를 RTA로 이용하는 연구가 진행되고 있는데 이는 열처리 시간이 짧기 때문에 위와 같은 문제점을 개선할 수 있었다. 하지만 RTA방법 또한 어느 정도의 thermal budget이 존재하고 추가적 장비가 필요하며 기판의 전체적 가열공정이므로 다른 CMOS공정과 compatibility가 떨어진다. 따라서 본 실험에서는 위와 같은 문제를 해결하고자 노력을 집중하였고 이를 위한 새로운 열처리 방법을 개발하였다. 즉 Pt 하부전극에 전압(전류)을 인가하여 순간적으로 고온으로 결정화시키는 새로운 공정을 모색하였는데 이와 같은 방법은 열처리를 위한 추가적인 장비가 필요없고 국부적으로 순간적인 가열이기 때문에 glass기판에도 적합하며 RTA보다 승온시간 및 열처리 시간이 짧기 때문에 thermal budget도 줄일 수 있었다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.5
• /
• pp.361-365
• /
• 2012

A bolt-clamped ultrasonic viscometer was designed and fabricated using a pair of ring-shaped piezoelectric ceramic resonators. For its compactness and low operation frequencies, simulation of piezoelectric resonators was carried out using an ATILA program. Ring-shaped resonators using $0.05Pb(Mn_{1/3}Sb_{2/3})O_3-0.95Pb(Zr_{0.475}Ti_{0.525})O_3$ ceramics were prepared by a conventional ceramic processing, which were then clamped with a pair of metal caps. The fabricated sensor module with a small volume of less than 1 $cm^3$ and an operation frequency as low as 26.5 kHz showed a good relationship between its quality factor and the viscosity of oil.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.20-20
• /
• 2010

The effect of excimer laser annealing on the structural and dielectric behaviors of $PbZr_{0.52}Ti_{0.48}O_3$ (PZT) thin films has been investigated. The amorphous PZT thin films were prepared on Pt/Ti/$SiO_2$/Si substrates by a sol-gel method. The PZT precursor was prepared from lead acetate, zirconium acetylacetonate, and titanium isopropoxide. The starting materials were dissolved in n-propanol and 1,3-propanediol. After, the amorphous PZT thin films were laser-annealed (using KrF excimer laser) as a function of the laser energy density and the number of laser pulse. Structural properties of PZT thin films are characterized by using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The dielectric characterization was done on a RT66A test system and a Agilent 4294A impedance analyzer. The PZT thin films show that excimer laser irradiation drastically improved the crystallization and dielectric properties of the PZT thin films, depending on the energy density and the pulse number.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.461-462
• /
• 2008

$BaMgAl_{10}O_{17}$:Mn, $Eu^{2+}$ green phosphors has been synthesized by the solid state reaction. Green phosphors of nano-size were manufactured in short time by shake method. which were easily manufactured respectively general method. Green phosphors of nano size were control additive, size of $ZrO_3$ ball, shake time and weight of ball in toluene. In result that green phosphors were obtained particle size of 140nm~150nm. The characteristics of fired samples were obtained by 365nm and 380nm excitation source under ultraviolet. In result that the highest PL intensity were observed in wavelength of 365nm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.242.1-242.1
• /
• 2013

최근, 저항변화 메모리 (resistance random access memory, ReRAM)는 단순한 구조, 고집적성, 낮은 소비 전력, 우수한 retention 특성 CMOS 기술과의 공정호환성 등의 장점으로 인하여 현재 사용되는 메모리의 물리적 한계를 극복할 수 있는 차세대 메모리로써 주목을 받고 있다. 더욱이 용액공정은 높은 균일성, 공정 시간 및 비율 감소 그리고 대면적화가 가능한 장점을 가진 이유로 TiOx, ZrOx ZnO 같은 high-k 물질들을 이용한 연구가 보고되고 있다. 기존의 ReRAM 용액공정에서 결함, 즉 oxygen vacancies 그리고 불순물들을 제어하기 위해 일반적으로 사용되는 furnace 열처리는 낮은 열효율과 고비용등의 문제점을 가지고 있다. 특히 glass 또는 flexble 기판의 경우 열처리 온도에 제약이 있다. 이러한 문제를 해결하기 위한 방법으로 열 균일성, 짧은 공정시간 의 장점을 가진 microwave 열처리 방법이 보고되고 있다. 따라서 본 연구에서는 용액공정을 이용하여 증착한 HfOx 기반의 저항변화 메모리를 제작하여 저온에서 microwave 열처리 와 furnace 열처리의 특성을 비교평가 하였다. 그 결과 microwave 열처리 방법이 furnace 열처리 방법보다 넓은 메모리 마진, 향상된 uniformity 를 가지는 것을 확인 하였다. 이로써 저온공정이 필요한 ReRAM 의 열처리 대안책 으로 사용될 수 있을 것으로 기대된다.

• Corrosion Science and Technology
• /
• v.18 no.5
• /
• pp.175-181
• /
• 2019

A failed spent fuel rod with 53,000 MWd/tU from a nuclear power plant was characterized, and the fission products and oxygen layer in the pellet-clad mechanical interaction region were observed using an EPMA (Electron Probe Micro-Analyzer). A sound fuel rod burned under similar conditions was used to compare and analyze, the results of the failed fuel rod. In the failed fuel rod, the oxide layer represented $10{\mu}m$ of the boundary of the cladding, and $35{\mu}m$ of the region outside the cladding. By comparison, in the sound fuel rod, the oxide layer was $8{\mu}m$, observed in the cladding boundary region. The cladding inner surface corrosion and the resulting fuel-cladding bonding were investigated using an EPMA. Zirconium existed in the bonding layer of the (U, Zr)O compound beyond the pellet cladding interaction gap of $20{\mu}m$, and composition of UZr2O3 was observed in the failed fuel rod. This paper presents the results of the EPMA examination of a spent fuel specimen, and a technique to analyze fission products in the pellet-clad mechanical interaction region.

• Korean Journal of Materials Research
• /
• v.28 no.11
• /
• pp.611-614
• /
• 2018

Laminate composites composed of $0.95Pb(Zr_{0.52}Ti_{0.48})O_3-0.05Pb(Mn_{1/3}Sb_{2/3})O_3$ piezoelectric ceramic and Fe-Si-B based magnetostrictive amorphous alloy are fabricated, and the effect of control of the areal dimensions and the thickness of the piezoelectric layer on the magnetoelectric(ME) properties of the laminate composites is studied. As the aspect ratio of the piezoelectric layer and the magnetostrictive layer increases, the maximum value of the ME voltage coefficient(${\alpha}_{ME}$) increases and the intensity of the DC magnetic field at which the maximum ${\alpha}_{ME}$ value appears decreases. Moreover, as the thickness of the piezoelectric layer decreases, ${\alpha}_{ME}$ tends to increase. The ME composites exhibit ${\alpha}_{ME}$ values higher than $1Vcm^{-1}Oe^{-1}$ even at the non-resonance frequency of 1 kHz. This study shows that, apart from the inherent characteristics of the piezoelectric composition, small thicknesses and high aspect ratios of the piezoelectric layer are important dimensional determinants for achieving high ME performance of the piezoelectric-magnetostrictive laminate composite.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.1
• /
• pp.9-22
• /
• 2023

Spin-off pyroprocessing technology and inert anode materials to replace the conventional carbon-based smelting process for critical materials were introduced. Efforts to select inert anode materials through numerical analysis and selected experimental results were devised for the high-throughput reduction of oxide feedstocks. The electrochemical properties of the inert anode material were evaluated, and stable electrolysis behavior and CaCu generation were observed during molten salt recycling. Thereafter, CuTi was prepared by reacting rutile (TiO₂) with CaCu in a Ti crucible. The formation of CuTi was confirmed when the concentration of CaO in the molten salt was controlled at 7.5mol%. A laboratory-scale electrorefining study was conducted using CuTi(Zr, Hf) alloys as the anodes, with a Ti electrodeposit conforming to the ASTM B299 standard recovered using a pilot-scale electrorefining device.

• Journal of Hydrogen and New Energy
• /
• v.35 no.1
• /
• pp.48-55
• /
• 2024

The electrochemically active site of mixed ionic and electronic conductor (MIEC) as a cathode material is restricted to the triple phase boundary in protonic ceramic fuel cells (PCFCs) due to the insufficient of proton-conducting properties of MIEC. This study primarily focused on expanding the electrochemically active site by La_0.6Sr_0.4Co_0.2Fe_0.8O_3-δ(LSCF6428)-BaZr_0.4Ce_0.4Y_0.1Yb_0.1O_3-δ (BZCYYb4411) composite cathode. The electrochemical properties of the composite cathode were evaluated using anode-supported PCFC single cells. In comparison to the LSCF6428 cathode, the peak power density of the LSCF6428-BZCYYb4411 composite cathode is much enhanced by the reduction in both ohmic and non-ohmic resistance, possibly due to the increased electrochemically active site.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1621-1625
• /
• 2015

Power quality has always been a concern of power engineers. Certainly an argument can be successfully made that most parts of power engineering have the ultimate objective to improve power quality. AC motors were widely used in industrial and domestic applications. Generally, AC motors were of two types: Induction and Synchronous motors. In motor many parameters like different load cycling, switching, working in hot weather and unbalances creates harmonics which creates major reasons for temperature rise of the motors. Due to high peak value of voltage, harmonics can weaken insulation in cables, windings and capacitors and different electronic components. Higher value of harmonics increase the motor current and decrease the power factor which will reduce the life time of the motor and increase the overall rating of all electrical equipments. Harmonics reduction of all the motors in India will save more power. Coating of windings of the motor with nano fillers will reduce the amount of harmonics in the motor. Based on the previous project works, actions were taken to use the enamel filled with various nano fillers for the coating of the windings of the different AC motors. Ball mill method was used to convert the micro particles of Al₂O₃, SiO₂, TiO₂, ZrO₂ and ZnO into nano particles. SEM, TEM and XRD were used to augment the particle size of the powder. The synthesized nano powders were mixed with the enamel by using ultrasonic vibrator. Then the enamel mixed with the nano fillers was coated to the windings of the several AC motors. Harmonics were measured in terms of various indices like THD, VHD, CHD and DIN by using Harmonic analyzer. There are many other measures and indices to describe power quality, but none is applicable in all cases and in many instances, these indices may hide more than they show. Sometimes power quality indices were used as a basis of comparison and standardization. The efficiency of the motors was increased by 5 – 10 %. The thermal withstanding capacity of the motor was increased by 5º to 15º C. The harmonics of the motors were reduced by 10 – 50%.