• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.271-274
• /
• 2000

Gas sensor materials capable of detecting hydrogen gases (H$_2$) or nitrogen oxides (NO$\_$x/, primarily NO and NO$_2$) with high sensitivity have attracted much interest in conjunction with the growing concern to the protection of global environments. Beside conventional sensor materials, such as semiconductors., conducting polymers and solid electrolytes, the potential of sensor materials with a new method for detecting hydrogen gases or nitrogen oxides gas has also been tested. The breakdown voltage of porous varistors shifted to a low electric field upon exposure to H$_2$ gas, whereas it shifted to a reverse direction in an atmosphere containing oxidizing gases such as O$_3$ and NO$_2$ in the temperature range of 300 to 600$^{\circ}C$. Furthermore, it was found that the magnitude of the breakdown voltage shift, i. e. the magnitude of sensitivity, was well correlated with gas concentration, and that the H$_2$ sensitivity was improved by controlling the composition of the Bi$_2$O$_3$ rich grain boundary phase. However, NO$\_$x/ sensing properties of porous varistors have not been studies in detail. The objective of the present study is to investigate the effect of the composition of the Bi$_2$O$_3$ rich grain boundary phase and other additive such as A1$_2$O$_3$ on the hydrogen gases (H$_2$) sensing properties of porous ZnO based varistors.

• 한국자기학회지
• /
• 제13권6호
• /
• pp.246-250
• /
• 2003

고주파 대역에서 전자기적 특성이 안정적으로 유지되는 Ni-Zn 페라이트를 제조하기 위해 Ni$_{0.8}$Zn$_{0.2}$Fe$_2$O$_4$를 기본조성으로 Bi$_2$O$_3$와 CaO를 첨가하였다. Bi$_2$O$_3$의 첨가량이 0.3 wt%까지는 손실이 증가하였고 그 이상의 첨가량에서는 감소하였으며, 투자율은 Bi$_2$O$_3$ 첨가량이 증가할수록 증가하였다. Bi$_2$O$_3$와 CaO는 고용체를 형성하여 입계에 편석 됨으로서 비저항층을 형성하여 각각 0.7 wt%, CaO 0.3 wt% 첨가할 경우 가장 낮은 손실과 높은 공명주파수를 나타내었다.

• 한국전기전자재료학회논문지
• /
• 제23권11호
• /
• pp.854-858
• /
• 2010

In this study, we have investigated the effects of Cr dopant on the sintering and electrical properties of ZnO-$Sb_2O_3$ (ZS) ceramics for varistor application. Spinel phases including $\alpha-$ and $\beta$-type was formed at ZS system and $\alpha$-spinel was stabilized by Cr doping in ZS system. Densification of ZS and ZSCr system was retarded to $1000^{\circ}C$ by the formation of spinel at $800^{\circ}C$. The morphology and its distribution of spinel phases in ZS system was homogeneous but disturbed by Cr doping. In ZSCr the densification of ZnO compared with ZS system was more retarded by low concentration of Zn interstitial defects induced by Cr doping in addition to the effect of spinel phase formation. The defects in each system were identified as attractive coulombic center (ZS: 0.13 eV, ZSCr: 0.12 eV) and singly charged oxygen vacancy $V_0^{\cdot}$ (ZSCr: 0.33 eV). In all ZS and ZSCr system have week varistor behavior by the formation of double Schottky barrier at grain boundary but its stability of barrier was very sensitive to sintering temperature.

• 한국전기전자재료학회논문지
• /
• 제25권9호
• /
• pp.717-722
• /
• 2012

In this work, we study on the effects of the oxygen pressure on the structural and crystalline of MgZnO thin films. MgZnO thin films were deposited on p-Si (111) substrates by using pulsed laser deposition. The X-ray diffraction analysis and energy-dispersive X-ray results revealed that as the oxygen pressure increased and Mg content in the MgZnO films decreased. Also Crystal structure was changed from cubic rock salt to hexagonal wurtzite. Alpha step and atomic force microscopy results showed that the thickness of the films are about 100 nm, and it has been found that the MgZnO (002) preferred orientation were deposited with increasing the oxygen pressure. Therefore, the effect of the preferred orientation, the crystallization grew in the form of the columnar; Grain size and RMS of the films were increased with increasing oxygen pressure.

• 한국재료학회지
• /
• 제11권4호
• /
• pp.319-323
• /
• 2001

펄스레이저 증착법 (PLD)으로 (0001)면 사파이어 기판 위에 성장시킨 ZnO 박막의 두게 변화가 표면형상, 결정성 및 전기/광학적 특성에 미치는 효과에 대하여 조사하였다. SEM 및 XRD 분석을 통해 약 4000 의 두께에서 3차원 island들이 생성되며, 박막의 두께가 증가함에 따라 결정립의 크기가 증가하고, 결정성이 향상되었음을 알 수 있었다 상온에서의 PL 측정을 통해 두께가 증가함에 따라 ultraviolet(UV) 및 deep level emission peak의 강도가 급격히 증가함을 알 수 있었다. Hall측정 결과, 모든 박막들이 H형 전도도를 보였고, 운반자농도가 $10^{19}$ $cm^{-3}$ 이상이었으며, 두께가 증가할수록 운반자농도가 감소하여 약 4000 에서 포화되는 경향을 보였다. 따라서, 사파이어 기판 위에 증착시킨 ZnO 박막은 약 4000 의 두께에서 bulk ZnO의 특성을 나타내었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1998년도 추계학술대회 논문집
• /
• pp.275-279
• /
• 1998

The influence of $WO_3$ (0.5-4.0mol%) on the microstructural and electrical properties of ZnO varistors was investigated. The major part of a tungsten segregated to the nodal point. SEM, EDAX, and XRD analysis revealed that three phase, such as W-rich phase, Bi-rich phase, and spinel phase, coexist at the nodal point. The average grain size increased in the range of 15.5-29.9pm with increasing $WO_3$ content. This may be probably attributed to liquid phase formed by $WO_3$, $WO_3$ acted as promotion additive of grain growth. As $WO_3$ content increase, the varistor voltage greatly decreased in the range 186.82-35.87V/mm due to the increase of grain growth. The barrier height decreased in the range 1.93-0.42eV with increasing $WO_3$content.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.625-628
• /
• 2002

The electrical properties of the praseodymium-based ZnO varistor ceramics, which are composed of Zn-Pr-Co-Cr-Dy oxides were investigated with $Dy_2O_3$ amount. The average grain size of varistor ceramics was greatly decreased from 18.2 to 4.6 pm with increasing $Dy_2O_3$ amount. The calculated nonlinear exponent$({\alpha})$ in varistor ceramics without $DY_2O_3$ was only 4.9, whereas the a value of the varistors with $DY_2O_3$ was abruptly increased in the range of 48.8 to 58.6. In particular, the maximum value of a was obtained by doping of 1.0 mol% $DY_2O_3$, reaching 58.6. The measured leakage current$(I_l)$ value in varistors without $DY_2O_3$ was $85.45{\mu}A$, whereas the $I_{\ell}$ value of the varistors with $DY_2O_3$ was very abruptly decreased in the range of 1.10 to $0.12{\mu}A$. In particular, the minimum value of $I_{\ell}$ was obtained by doping of 0.5 mol% $DY_2O_3$, reaching $0.12{\mu}A$. The tan $\delta$ varied in V-shape, with minimum 2.28% at 0.5 mol% $DY_2O_3$. The donor concentration and the density of interface states were decreased in the range of $(4.66{\sim}0.25){\times}10^{18}cm^3$ and $(5.70{\sim}1.39){\times}10^{12}/cm^2$, respectively, as $DY_2O_3$ amount is increased.

• 한국전기전자재료학회논문지
• /
• 제29권4호
• /
• pp.210-214
• /
• 2016

We investigated the sintering behavior and piezoelectric properties of lead-free $(K_{0.5}Na_{0.5})NbO_3$ ceramics co-doped with excess 0.01 mol ZnO and x mol $MnO_2$, where x was varied from 0 to 0.03. Excess $MnO_2$ addition was found to retard the grain growth and densification during sintering. However, 0.005 mol $MnO_2$ addition improved the piezoelectric properties of 0.01 mol ZnO added $(K_{0.5}Na_{0.5})NbO_3$ ceramics. The planar mode piezoelectric coupling coefficient, electromechanical quality factor, and piezoelectric constant $d_{33}$ of 0.01 mol ZnO and 0.005 mol $MnO_2$ added specimen were 0.40, 304, and 214 pC/N, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.357-360
• /
• 2000

Ferroelectric 0.05PZN-xPZT(90/10)-(0.95-x)PZT(10/90) (x=0.65, 0.85) specimens were fabricated by the mixed-oxide method and cold-pressing method using sol-gel derived PZT(90/10) and PZT(10/90) powders. All specimens show a uniform ferroelectric grain without the presence of the pyrocholre phase. Average grain size increased with an increase in sintering temperature, the value for the x=0.65 specimen sintered at 125$0^{\circ}C$ was 14.4${\mu}{\textrm}{m}$. The dielectric constant and dielectric loss of the x=0.65 specimen sintered at 125$0^{\circ}C$ were 1247, 2.05%, respectively. All specimens showed fairly good temperature and frequency stability of dielectric constant with the range from -2$0^{\circ}C$ to 6$0^{\circ}C$ and 100Hz to 10MHz. The coercive electric field and the remanent polarization of x = 0.65 specimen sintered at 125$0^{\circ}C$ were 8.5 kV/cm and 13 $\mu$C/cm$^2$, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.365-368
• /
• 2000

We have studies on the Microstructures and densities as a function of forming pressures and the magnetic properties of the specimens with additive Bi$_2$O$_3$ that sintered at 95$0^{\circ}C$ for 4.5 hours for synthesizing optimal Ni-Cu-Zn ferrite. Green density rose generally as Forming pressure increased from 1.7 ton/cm$^2$to 2.5 ton/cm$^2$and Cold Isostatic Pressure(CIP) method was more effective than Die Pressure(DP) method to high green density. Forming pressure had no influence on apparent density but on the other hand Bi$_2$O$_3$contents were strongly dominant to appaernt density than forming pressure. Bi$_2$O$_3$liquid phases created during sintering process promoted sintering and grain growth so that apparent density, grain size and permeability increased compared to that of the specimens which were sintered with non-additive Bi$_2$O$_3$.