• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.262.1-262.1
• /
• 2013

ZnO 나노구조는 전기적 성질과 화학적인 안정성 때문에 가스센서, 투명 전극 및 태양전지와 같은 전자소자와 광소자에 널리 사용되고 있다. ZnO 박막을 증착하는 방법은 Physical Vapor Deposition과 Chemical Vapor Deposition이 있으나 나노 구조를 가진 SnO2를 형성하기 어렵다. 전기 화학적 증착(Electrochemical Deposition: ECD)은 낮은 온도에서 진공 공정이 필요하지 않기 때문에 경제적이며 빠른 성장 속도를 가지고 있기 때문에 ZnO 나노 구조를 효과적으로 형성 할 수 있다. 본 연구에서는 Indium Tin Oxide (ITO) 기판 위에 ZnO 나노 구조를 형성시켜 전기적 및 구조적 특성을 관찰하였다. 0.1 M zinc nitrate와 0.1 M potassium chloride를 용매에 각각 용해하여 ZnO 나노구조를 성장하였다. ZnO 나노구조를 성장하기 위하여 인가전압을 -0.75 V부터 -2.5 V까지 0.5 V 간격으로 변화하였다. X-선 회절 분석결과에서 ZnO의 피크의 크기가 큰 전기화적적 성장 전압구간과, 주사전자현미경 분석결과에서 나노 구조가 가장 잘 나타난 성장 전압구간을 다시 0.1 V 간격으로 세분화하여 최적화 조건을 분석하였다. X-선 회절 실험으로 형성한 ZnO 나노구조의 피크가 (110) (002)로 나타났다. X-선 회절 분석의 intensity의 값이 (002)방향이 가장 크게 나타났으므로 우선적으로 (002) 방향으로 ZnO 나노구조가 성장됨을 알 수 있었다. 주사전자현미경상은 grain size가 200~300 nm 사이의 ZnO 나노구조가 형성되며, grain size가 전기화학적 증착 장치의 성장전압이 커짐에 따라 커지는 것을 알 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.389-389
• /
• 2011

Transparent conductive oxide (TCO) 박막은 디스플레이 및 태양전지 등 광범위한 분야에서 적용되고 있으며, 특히 indium tin oxide (ITO)는 낮은 전기적 저항과 우수한 광투과도를 가지고 있어서 이미 많은 분야에 적용되고 있다. 본 연구는 RF와 DC를 혼용한 마그네트론 스퍼터링 공정을 활용하여 ITO 박막 특성 및 이를 활용한 유기태양전지 적용에 관한 것이다. UV-O3 처리된 glass 기판위에 thermal evaporation 방식으로 밀착력을 높이기 위하여 Cr을 5 nm 두께로 증착한 후 Al을 95 nm 증착하였다. 그 위에 스퍼터링 공정으로 ITO 박막을 In2O3:SnO2 target (10wt% SnO2)을 사용하여 1.0 mTorr의 공정압력(Ar:O2=30:1), 50W의 RF power 및 0.11kW의 DC power에서 50~250 nm의 두께로 증착하였다. ITO 박막의 결정구조 및 표면 형상은 x-ray diffraction (XRD) 및 scanning electron microscope (SEM)을 사용하여 분석하였으며, 전기적 특성은 four-point probe법으로 비저항값을 측정하였다. 또한 높은 광변환효율을 가지는 태양전지 제작을 위하여, 다양한 두께의 ITO 박막을 사용하여 ITO/ZnO/P3HT:PCBM/PEDOT/Ag 구조의 유기태양전지를 제작하여 소자 특성을 최적화 하였다.

• Electrical & Electronic Materials
• /
• v.8 no.1
• /
• pp.21-26
• /
• 1995

Highly sensitive and mechanically stable gas sensors have been fabricated using the microfabrication and micromaching techniques. The sensing material used to detect the offensive trimethylarnine ((CH$_{3}$)$_{3}$N) gas is 6 wt% $Al_{2}$O$_{3}$-doped, 1000.angs.-thick ZnO deposited by r. f. magnetron sputtering. The optimum operating temperature of the sensor is 350.deg.C and the corresponding heater power is about 85mW. Excellent thermal insulation is achieved by the use of a double-layer structure of 0.2.mu.m -thick silicon nitride and 1.4.mu.m-thick phosphosilicate glass(PSG) prepared by low pressure chemical vapor deposition(LPCVD) and atmospheric pressure chemical vapor deposition(APCVD), respectively. The sensors are mechanically stable enough to endure at least 43, 200 heat cycles between room temperature and 350.deg. C.

• Korean Journal of Metals and Materials
• /
• v.50 no.11
• /
• pp.847-854
• /
• 2012

Al-doped ZnO (AZO) thin films were grown on quartz substrates by the sol-gel method. The effects of the Al mole fraction on the structural and optical properties of the AZO thin films were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), and UV-VIS spectroscopy. The particle size of the AZO thin films decreased with an increase in Al concentrations. The optical parameters, the optical band gap, absorption coefficient, refractive index, dispersion parameter, and optical conductivity, were studied in order to investigate the effects of Al concentration on the optical properties of AZO thin films. The dispersion energy, single-oscillator energy, average oscillator wavelength, average oscillator strength, and refractive index at an infinite wavelength of the AZO thin films were affected by the Al incorporation. The optical conductivity of the AZO thin films also increased with increasing photon energy.

• Journal of the Korean Ceramic Society
• /
• v.48 no.4
• /
• pp.328-333
• /
• 2011

The influence of Al-doped ZnO (AZO) thin films degraded under high temperature and damp heat on the performance deterioration of Cu(In,Ga)$Se_2$ (CIGS) solar cells was investigated. CIGS solar cells with AZO/CdS/CIGS/Mo structure were prepared on glass substrate and exposed to high temperature ($85^{\circ}C$) and damp heat ($85^{\circ}C$/85% RH) for 1000 h. As-prepared CIGS solar cells had 64.91% in fill factor (FF) and 12.04% in conversion efficiency. After exposed to high temperature, CIGS solar cell had 59.14% in FF and 9.78% in efficiency, while after exposed to damp heat, it had 54.00% in FF and 8.78% in efficiency. AZO thin films in the deteriorated CIGS solar cells showed increases in resistivity up to 3.1 times and 4.4 times compared to their initial resistivity after 1000 h of high temperature and damp heat exposure, respectively. These results can be explained by the decreases in carrier concentration and mobility due to diffusion or adsorption of oxygen and moisture in AZO thin films. It can be inferred that decreases in FF and conversion efficiency were caused by an increase in series resistance, which resulted from an increase in resistivity of AZO thin films degraded under high temperature and damp heat.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.24 no.7
• /
• pp.568-573
• /
• 2011

AZO (Al doped ZnO) thin films were deposited on the quartz substrates with thickness variation from 25 to 300 nm by using PLD (pulsed laser deposition). XRD (x-ray diffractometer), SPM (scanning probe microscopy), Hall effect measurement and uv-visible spectrophotometer were employed to investigate the structural, morphological, electrical and optical properties of the thin films. XRD results demonstrated that films were preferrentially oriented along the c-axis and crystallinity of film was improved with increase of film thickness. As for the surface morphologies, the mean diameter and root mean square of grains were increased as the film thickness was increased. When the film thickness was 200 nm, the lowest resistivity of $4.25{\times}10^{-4}\;{\Omega}cm$ obtained with carrier concentration of $6.84{\times}10^{20}\;cm^{-3}$ and mobility of $21.4\;cm^2/V{\cdot}S$. All samples showed more than 80% of transmittance in the visible range. Upon these results, it is found that the samples thickness can affect their structural, morphological, optical and electrical properties. This study suggests that the resistivity can be improved by controlling film thickness.

• Korean Journal of Materials Research
• /
• v.20 no.1
• /
• pp.47-50
• /
• 2010

Various thicknesses of Al-doped ZnO (AZO) films were deposited on glass substrate using pulsed dc magnetron sputtering with a cylindrical target designed for large-area high-speed deposition. The structural, electrical, and optical properties of the films of various thicknesses were characterized. All deposited AZO films have (0002) preferred orientation with the c-axis perpendicular to the substrate. Crystal quality and surface morphology of the films changed according to the film thickness. The samples with higher surface roughness exhibited lower Hall mobility. Analysis of the measured data of the optical band gap and the carrier concentration revealed that there were no changes for all the film thicknesses. The optical transmittances were more than 85% regardless of film thickness within the visible wavelength region. The lowest resistivity, $4.13\times10^{-4}\Omega{\cdot}cm^{-1}$ was found in 750 nm films with an electron mobility $(\mu)$ of $10.6 cm^2V^{-1} s^{-1}$ and a carrier concentration (n) of $1.42\times10^{21} cm^{-3}$.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2006.10a
• /
• pp.33-34
• /
• 2006

• Current Photovoltaic Research
• /
• v.3 no.3
• /
• pp.101-105
• /
• 2015

ZnO is gathering great interest for large square optoelectrical devices of flat panel display (FHD) and solar cell as a transparent conductive oxide (TCO). Herewith, Mg and IIIA (Al, In) co-doped ZnO films were prepared on SLG substrate using RF magnetron sputtering system. The effect of variation of atomic weight % of Mg and ZnO have been investigated. The atomic weight % Al and In are of 3% and kept constant throughout. The numbers of samples were prepared according to their different contents, which are $M_{3%}AZO_{94%}$, $M_{4%}AZO_{93%}-(MAZO)$ and $M_{3%}IZO_{94%}$, $M_{4%}IZO_{93%}-(MIZO)$ respectively. A RF power of 225 W and working pressure of 6 m Torr was used for the deposition at $300^{\circ}C$. All of the two thin film show good uniformity in field emission scanning electron microscopy image. $M_{3%}AZO_{94%}$ thin film shows overall better performance among the all. The film shows the best lowest resistivity, carrier concentration, mobility and Sheet resistance and is found to be are of $8.16{\times}10^{-4}{\Omega}cm$, $4.372{\times}10^{20}/cm^3$, $17.5cm^2/vs$ and $8.9{\Omega}/sq$ respectively. Also $M_{3%}AZO_{94%}$ thin film shows the relatively high optical band gap energy of 3.7 eV with high transmittance more than 80% in visible region required for the better solar cell performance.

• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.88-89
• /
• 2007

ZnO thin films were deposited on $Al_2O_3$ (alumina) substrates by pulsed laser deposition (PLD) using Nd:YAG laser with a wavelength of 355nm, at room temperature and oxygen partial pressure of 1, 10, 30, 50, 100, and 200m Torr. Furthermore, deposited ZnO thin films were post-annealed at 400, 550, $600^{\circ}C$. The effects of oxygen partial pressure and post-annealing temperature on structural properties of the deposited films have been investigated by means of X-ray diffraction (XRD), and atomic force microscope (AFM), respectively. It has been found that ZnO thin films exhibit c-axis orientation, exhibiting an increased foil width at half maximum (FWHM) value of (002) diffraction peak at 30m Torr oxygen partial pressure and higher post-annealing temperature ($700^{\circ}C$).