• 전기화학회지
• /
• 제21권1호
• /
• pp.12-20
• /
• 2018

To solve low cycle efficiency of the zinc anode in Zn-air batteries by corrosion, this study examined the effects of Al as a cathodic protection additive to Zn. The Al-mixed Zn anodes were produced by mixing Zn and Al powder (1, 2, and 3 wt. %). To compare the effects of the Al additive, Si was selected under the same conditions. The morphology and elemental composition of the additives in the Zn were characterized by scanning electron microscopy, energy dispersive X-ray spectroscopy, and inductively coupled plasma - mass spectrometry. The anti-corrosion effects of the Al and Si-mixed Zn anodes were examined by linear polarization. Cyclic voltammetry and charge-discharge tests were conducted to evaluate the electrochemical performance of the Al and Si-mixed Zn anodes. As a result, the Al-mixed Zn anodes showed highest corrosion resistance and cycling performance. Among these, the 2 wt.% Al-mixed Zn anodes exhibited best electrochemical performance.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.714-715
• /
• 2006

The Application of powder metallurgy (PM) aluminum structural parts is at its early growing stage, despite of some automotive applications. The market potential for PM aluminum, however, is large. Growth is expected from the market expansion of the existing applications and new applications, including the replacements of aluminum and zinc based castings and some ferrous PM automotive parts by PM aluminum. Compared to castings, PM is an efficient mass production technology. The PM aluminum is more competitive than die casting for some automotive applications. Besides weight saving leading to performance improvement, the total cost increase for aluminum PM parts is less than 15% compared to ferrous PM automotive parts. The future is promising for PM aluminum.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.1129-1131
• /
• 2002

Zinc Air battery obtain their energy density advantage over the other batteries by utilizing ambient oxygen as the cathode materials, and reusing cathode as recycled form. And specific capacity of zinc powder is as high as 820mAh/g. When Zinc Air battery discharged by low rate current discharge voltage profile has very flat pattern until end of voltage. But, when Zinc Air battery discharged by high rate current discharge voltage and capacity become lower. Therefore, we focused on effects of catalyst size in cathode. So we examined performance of zinc air batteries, average discharge voltage, capacity, energy, resistance. And we also obtained resistance by the GSM pulse discharge. So we have got optimum size of catalyst for Zinc Air battery.

• Journal of Electrochemical Science and Technology
• /
• 제8권1호
• /
• pp.77-86
• /
• 2017

The valorization of domestic wastes becomes a very important research axis that can reduce the energy consumption and protect our environment. The objective of this study is to remove zinc ions from wastewater by using banana peels after their activation as sensor in the working electrode for an environmental application. Banana peels were dried, crushed and treated with sulfuric acid then mixed with polyaniline to improve their electrical conductivity. Cyclic voltammetry and chronoamperometry were used for electrochemistry tests. The obtained voltammogramms at well optimized conditions of applied potential of -1.3 V/SCE and initial zinc concentration of 0.2M during 2 hours of electrolysis, showed the reduction peak of the zinc at a potential of -1.14 V/SCE, which confirmed the activity of this electrode. The modeling of experimental data revealed that the adsorption was fitted by the Langmuir isotherm with a maximal adsorption capacity of 3.4188 mg/g. Changes in the structure of the powder after the electrosorption was noticed by SEM and EDX. Finally, the dosage of the electrolytic solution showed a diminution of the zinc concentration with yield of 99.99%.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2003년도 춘계학술발표강연 및 논문개요집
• /
• pp.191-191
• /
• 2003

가시광선영역에서 높은 광학적 투명도를 갖는 n-type 반도체인 ZnO 박막은 넓은 범위에서 응용되고 있다. 현재 ZnO 박막의 특성 향상을 위하여 여러 원소(Al, Ga)의 도핑을 시도하고 있다. 특히 Al-doped ZnO 박막은 sol-gel dip coating에 의해서도 높은 전기전도도와 투과율로 활발히 연구되고 있다 본 논문에서는 여러 도핑농도를 갖는 Al-doped ZnO 박막이 sol-gel dip coating법에 의해 준비되었다. Al-doped ZnO 박막은 zinc acetate [Zn($CH_3$COO$_2$)ㆍ2$H_2O$] powder 와 여러 도핑농도를 갖는 aluminum nitrate (Al(NO$_3$)$_3$ㆍ9$H_2O$) powder를 알코올에 용해하여 $H_2O$, Ethylene glycol, Ethylene diamine 등을 첨가하여 제조하였다 XRD와 SEM (Scanning electron microscope)이 막의 상형성 분석을 위해 이용되었으며, 가시광선 영역 투과율(UV/VIS spectrophotometer)과 표면전기저항(four point probe)이 주요 특성으로 분석되었다.

• 한국안전학회지
• /
• 제31권4호
• /
• pp.82-89
• /
• 2016

In this paper, various of experiments were performed for checking the usefulness of Pozzolan Inorganic Polymer(PIP) Waterproof Admixture. The results of the experiment enabled to set the optimum mixture ratio of PIP waterproof admixture as 3.5%. Then, the test specimen mixed with PIP waterproof admixture was produced and consider whether meeting the quality standard of waterproofing admixture for concrete (KS F 4926) From the results, all the items such as mechanical properties and durability were meet the quality standard of KS. The PIP waterproof admixture concrete shows the high resistance of absorption, permeability and chloride ion penetration thanks to its internal components such as siliceous powder, zinc stearate and dispersive polymer.

• 한국표면공학회지
• /
• 제27권1호
• /
• pp.45-53
• /
• 1994

A kinetic study on the electrodeposition of zinc-iron alloys onto a steel in chloride solutions has been car-ried out using a rotating disc geometry. The results show that the deposition rate was increased with electropotential, disc rotation speed and temperature, and consequently the rate was partly controlled by elec-trochemical reaction and partly by mass transport. The iron content of deposit was more increased with cell voltage than with disc rotating speed and temperature. During electrodeposition process, the addition of metal-lic zinc powder retards oxidation rate of $Fe^{2+}$.

• Bulletin of the Korean Chemical Society
• /
• 제33권7호
• /
• pp.2435-2438
• /
• 2012

• 대한화장품학회지
• /
• 제47권1호
• /
• pp.1-7
• /
• 2021

전 세계적으로 자외선 차단제의 유효성 및 안전성에 대한 관심이 증가함에 따라 새로운 무기 자외선 차단제 개발에 대한 연구도 활기를 띄고 있다. 본 연구에서는 최근에 이슈화된 나노물질규제에 대응 가능한 나노 사이즈가 아닌 non-nano 막대형 산화아연을 합성하였고, 이를 세틸알코올로 표면처리한 막대형 산화아연분체를 개발하여 물리적 특성을 조사하였으며 자외선 차단제로서의 응용가능성을 평가하였다. 실험 결과, non-nano인 막대형 산화아연 분체를 적용한 선크림의 자외선 차단 효능과 백탁 정도는 40 nm 크기의 산화아연과 비슷한 결과를 나타냈으며, 막대형 산화아연 분산액을 사용한 선크림은 자외선 차단효능이 현저히 증가함을 확인하였다. 따라서 본 연구를 통해 개발된 막대형 산화아연 분체는 non-nano (200 nm)임에도 불구하고 투명성(백탁 개선), 자외선 차단 효능 그리고 사용감 측면에서 우수한 자외선 차단제로서 응용 가능성이 있음을 시사하였다.

• 한국잠사곤충학회지
• /
• 제43권1호
• /
• pp.21-25
• /
• 2001

Jeung-pyun added to mulberry leaves powder was tested to prove in inorganic ingredients, physical function, chromaticity and rheometer. For cake, mulberry leaves powder were added to rice flour in the ratio of 0%, 1%, 2%, and 3% respectively. In inorganic ingredients test, the amounts of calcium, magnesium and potassium were increased according to adding levels of mulberry leaves powder. But the amounts of iron, copper and zinc, were not correlated with it. Calcium, magnesium and potassium are anti-hypertension inorganic substances. Thus, it is considered that food with plenty amountsz of inorganic ingredients is an effective diet for the patients who suffer from cardiovascular disease. In physical evalution test, the ratio of mulberry leaves powder was not correlated with the appearance of Jeung-pyun. The value of color decreased as the ratio of mulberry leaves powder increases. In texture, Jeung-pyun. The value of color decreased as the ratio of mulberry leaves power increase. In texture, Jeung-pyun added with 2% mulberry leaves powder had the highest value. In moisture, as the level of mulberry leaves powder was increased, the value was decreased. In rheometer test, Jeung-pyun 0% mulberry leaves powder had the highest value in hardness. While the ratio of mulberry leaves powder was not correlated with cohesiveness. Jeung-pyun added to 1% mulberry leaves powder had the highest value. In gummines and brittleness, 0% Jeung-pyun had the highest value, but the ratio was not correlate with cohesiveness.