• Publications of The Korean Astronomical Society
• /
• v.30 no.2
• /
• pp.709-711
• /
• 2015

In modern Astronomy the vernal equinoctial (VE) point is taken as the starting point for measuring celestial longitudes. Due to the precession of equinoxes, the above point is receding back along the ecliptic. As a result, the longitudes of fixed stars are increasing every year. In ancient India, the Hindu astronomers did not favour the idea of fixed stars changing their longitudes. In order to stabilize the zodiac, they had taken as the origin a point which is fixed on the ecliptic and as such is quite different from the VE point. This initial point being a fixed one, the longitude of stars measured from this origin remain invariable for all time. There was an epoch in the past when this initial point coincided with the VE point and thus the epoch may be called the zero-year. There is controversy over the determination of the zero-year. The reasons for the choice for the fixed zodiacal system by the Hindu astronomers as well as the epoch of zero-year have been found out on the basis of information available in various astronomical treatises of ancient India written in Sanskrit.

• Journal of Power Electronics
• /
• v.19 no.2
• /
• pp.560-568
• /
• 2019

This paper studies the inherent relationship between currents and zero-sequence components. Then a precise algorithm is proposed to calculate the injected zero-sequence component to control the DC-Link neutral-point voltage balance, which can result in a more efficient and flexible neutral point voltage balance with a desirable performance. In addition, it is shown that carried-based PWM with the calculated zero-sequence component scheme can be equivalent to space-vector pulse-width modulation (SVPWM). Based on the proposed method, the optimal zero-sequence component of the feasible modulation indices is analyzed. In addition, the unbalanced load limitation of the DC-Link neutral-point voltage balance control is also revealed. Simulation and experimental results are shown to verify the validity and practicality of the proposed algorithm.

• Journal of the Korean Data and Information Science Society
• /
• v.15 no.2
• /
• pp.387-394
• /
• 2004

Zero-Inflated Poisson distribution is Poisson distribution with excess zeros. Recently defects of product hardley happen in the manufacturing process. In this case it is desirable to apply to the Zero-Inflated Poisson distribution rather than Poisson. Our target of this paper is to study the tests for changes of rate of defects after the unknown change-point. We are going to compare the powers of the two proposed tests with likelihood tests by the simulations.

• Proceedings of the KIEE Conference
• /
• 1998.11a
• /
• pp.220-222
• /
• 1998

This paper presents a method, which develops an ability of Zero-phase Overcurrent Relay. Zero-phase current is very useful factor of Fault decision in Protect Relaying system. Actually, the setting-point value of Designed Relay, using Zero-phase current, is fixed. So in the case of deciding fault, Fixed setting-point value is not suitable for changing Load. and cause errors in Distributions system. For solving this problem, This paper proposes the Changed setting point value Algorithm, which can be adaptive for changing Distributions system using Zero-phase current r.m.s. indexes. The results of simulation under Load changing and High impedance fault show that proposed algorithm is useful for changing Distributions system and decreasing errors.

• Journal of Power Electronics
• /
• v.17 no.1
• /
• pp.1-10
• /
• 2017

This paper presents a novel predictive digital control method for boundary conduction mode PFC converters without the need for detecting the inductor current. In the proposed method, the inductor current is predicted by analytical equations instead of being detected by a sensing-resistor. The predicted zero-crossing point of the inductor current is determined by the values of the input voltage, output voltage and predicted inductor current. Importantly, the prediction of zero-crossing point is achieved in just a single switching cycle. Therefore, the errors in predictive calculation caused by parameter variations can be compensated. The prediction of the zero-crossing point with the proposed method has been shown to have good accuracy. The proposed method also shows high stability towards variations in both the inductance and output power. Experimental results demonstrate the effectiveness of the proposed predictive digital control method for PFC converters.

• Journal of Electrical Engineering and Technology
• /
• v.7 no.2
• /
• pp.151-156
• /
• 2012

The current study presents a zero-one integer programming approach to determine the minimum break point set for the coordination of directional relays. First, the network is reduced if there are any parallel lines or three-end nodes. Second, all the directed loops are enumerated to reduce the iteration. Finally, the problem is formulated as a set-covering problem, and the break point set is determined using the zero-one integer programming technique. Arbitrary starting relay locations and the arbitrary consideration of relay sequence to set and coordinate relays result in navigating the loops many times and futile attempts to achieve system-wide relay coordination. These algorithms are compared with the existing methods, and the results are presented. The problem is formulated as a setcovering problem solved by the zero-one integer programming approach using LINGO 12, an optimization modeling software.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1874-1875
• /
• 2007

전력선 통신(Power Line Communication)은 전력선과 연결되어 있는 디바이스들을 간단히 제어하기 위한 기술로 제안 되었으며, 홈오토메이션, 원격 검침(AMR) 분야에서 많이 사용되고 있다. 최근에는 스마트 홈, 유비쿼터스와 관련해 다양한 홈 네트워크 시스템들이 제안되면서 이들 시스템을 효과적으로 구현할 수 있는 방안으로 전력선 통신기술이 많이 제안되고 있다. 전력선 통신은 많은 유용성에도 불구하고 전력선 채널에 대한 정확한 채널 모델링과 전력선 모뎀의 성능에 관해서는 많은 문제점을 나타내고 있다. 본 논문에서는 전력선 통신을 위한 전송선로의 주파수에 대한 잡음과 임피던스 특성 및 전력선 채널에 데이터 신호를 Chirp-SS(Spread Spectrum) 신호로 맵핑하여 채널의 Zero Cross Point 구간에 전송하였을 때의 시뮬레이션 결과와 설계된 FPGA 보드를 비교분석 하였다. 채널 모델은 배경 잡음과 할로겐 잡음, 전송선로의 감쇄 특성만을 고려하였으며, 전력선 채널 상에서의 Zero Cross Point를 이용한 전력선 통신 모뎀의 성능을 분석하였다.

• Journal of information and communication convergence engineering
• /
• v.19 no.2
• /
• pp.93-101
• /
• 2021

Cardiac arrhythmias are common heart diseases and generally cause sudden cardiac death. Electrocardiogram (ECG) is an effective tool that can reveal the electrical activity of the heart and diagnose cardiac arrhythmias. We propose detection of P waves based on QRST cancellation zero-one substitution. After preprocessing, the QRST segment is determined by detecting the Q wave start point and T wave end point separately. The Q wave start point is detected by digital analyses of the QRS complex width, and the T wave end point is detected by computation of an indicator related to the area covered by the T wave curve. Then, we determine whether the sampled value of the signal is in the interval of the QRST segment and substitute zero or one for the value to cancel the QRST segment. Finally, the maximum amplitude is selected as the peak of the P wave in each RR interval of the residual signal. The average detection rate for the QT database was 97.67%.

• Journal of the Mineralogical Society of Korea
• /
• v.12 no.2
• /
• pp.91-95
• /
• 1999

• Journal of the Korean Data and Information Science Society
• /
• v.9 no.1
• /
• pp.1-9
• /
• 1998

In case of Zero-Inflated Poisson model with a change-point, likelihood ratio test statistic was used for testing hypothesis for a change-point. A change-point and several interesting parameters were estimated by using the method of moments and maximum likelihood. In order to compare the estimators, empirical mean-square-error was used. Real data for the Zero-Inflated Poisson model with a change-point and Poisson model without a change-point were examined.