• 천문학회보
• /
• 제45권1호
• /
• pp.61.3-61.3
• /
• 2020

We present spatially resolved outflows and photoionization for a pilot sample of 11 type 1 AGNs (z<0.3) based on the Gemini Multi-Object Spectrograph Integral Field Unit data. These AGNs were selected since we found strong outflow signatures in SDSS spectra. We focus on [OIII] and Hα emission lines to probe outflow kinematics by measuring line flux, velocity, and velocity dispersion at each pixel. We investigate characteristics of gas kinematics of type 1 AGNs and compare them with those of type 2 AGNs in our previous studies. Furthermore, by drawing BPT map, photoionization states will be also discussed. Based on the results, we discuss various implications on the impacts of outflows on star formation in host galaxies.

• 한국정밀공학회지
• /
• 제21권4호
• /
• pp.39-47
• /
• 2004

In mold machining, there are many concave machining regions where chatter and tool deflection occur since MRR(material removal rate) increases as curvature increases even though cutting speed and depth of cut are constant. Boolean operation between stock and tool model is widely used to compute MRR in NC milling simulation. In finish cutting, the side step is reduced to about 0.3mm and tool path length is sometimes over loom, so Boolean operation takes long computation time and includes much error if the resolution of stock and tool model is larger than the side step. In this paper, curvature of CL (cutter location) surface and side step of tool path is used to compute the feedrate for constant MRR machining. The data structure of CL surface is Z-map generated from NC tool path. The algorithm to get local curvature from discrete data was developed and applied to compute local curvature of CL surface. The side step of tool path was computed by point density map which includes cutter location point density at each grid element. The feedrate computed from curvature and side step is inserted to new tool path to regulate MRR. The resultants were applied to feedrate optimization system which generates new tool path with feedrate from NC codes for finish cutting. The system was applied to the machining of speaker and cellular phone mold. The finishing time was reduced to 12.6%, tool wear was reduced from 2mm to 1.1mm and chatter marks and over cut on corner were reduced, compared to the machining by constant feedrate. The machining time was shorter to 17% and surface quality and tool was also better than the conventional federate regulation using curvature of the tool path.

• 한국해안·해양공학회논문집
• /
• 제22권1호
• /
• pp.58-66
• /
• 2010

본 논문에서는 지상 LiDAR 및 MBES(다중빔 음향측심기)를 이용하여 정밀 지형 및 수심측량을 실시하였고, 조간대 영역의 육도-해도 접합을 통하여 대조차 해안인 만리포에 대한 정밀 지형도를 작성하였다. 제한된 시간내에 조간대 영역의 충분한 지형정보 획득을 위하여 간조시 지상 LiDAR 및 DGPS를 차량지붕에 탑재하여 이동 정지 스캐닝의 해변 전체의 지형정보를 획득하였고, 이와 동시에 만조시 MBES를 통하여 수심측량을 실시하였으며 조위계 설치와 목측을 통한 조위관측의 병행을 통하여 수심보정자료 및 만리포의 평균해면 추산자료로 사용하였다. 조간대 정합을 위해 지형 및 수심자료의 수직좌표계 기준면은 인천 평균해면으로 단일화하였으며, 조간대 평균 중첩오차는 약 2~6 cm 이내로 나타났다. 또한 지상 LiDAR 자료의 정확도 검증을 위해 RTK-DGPS 측량을 동시에 실시하여 수직좌표값을 비교한 결과 평균 제곱근 오차가 약 4~7 cm 이내로 나타났다. 정밀지형도 작성은 GIS 기반 자료처리를 통하여 50 cm 해상도를 갖는 수치표고자료로 생산하였으며, 이는 현재 연안지역 침수범람 예측을 위한 폭풍해일 침수범람 예측모델의 정밀 입력자료로 사용되고 있다. 또한 장기간에 걸친 주기적 측량 자료와 측량시의 인위적 해변 변화량 및 해양환경정보를 함께 고려하여 3차원 공간분석을 실시한다면 침 퇴적양의 정확한 산출을 통하여 연안 모니터링에도 효과적으로 활용될 수 있을 것이다.

• 대한자원환경지질학회:학술대회논문집
• /
• 대한자원환경지질학회 1999년도 춘계 공동학술발표회
• /
• pp.90-93
• /
• 1999

We present a high frequency electromagnetic (EM) inversion scheme for detecting and characterizing a fracture using single-hole data. At high frequencies, say above tens of mega-hertz, since displacement currents cannot be ignored, electrical permittivity as well as electrical conductivity is to be considered together for analyzing the EM scattering data. In this paper, we have developed a three-step inversion scheme to map the fracture and to evaluate its electrical conductivity and permittivity. We performed EM profiling along the z-axis using three-component receivers for each source. The model was excited by a vertical magnetic dipole and the resistant magnetic fields were inverted using the non-linear least-squares method. Background resistivity and permittivity were easily obtained using vertical magnetic fields below 1 MHz and above 10 MHz, respectively. Both the vertical and dipping sheets were successfully mapped using the phase difference between 40 and 41 MHz. The electrical property of the sheet was well resolved using the information obtained in the previous two steps and secondary magnetic fields. Our study shows the potential of imaging the fracture in single-hole survey environment using the high frequency EM method.

• 한국측량학회지
• /
• 제26권2호
• /
• pp.111-116
• /
• 2008

본 연구는 무선조정 헬리콥터에 1000만 화소 카메라인 비측량용 카메라를 장착하였다. 그리고 상공에서 촬영되는 영상을 지상에서 제어하면서 중복도를 고려하여 촬영하였다. 획득된 영상으로부터 영상정합에 의해 불규칙 삼각망을 추출하여 수치표고모형(DEM)을 나타낼 수가 있었으며, 재래적인 측량방식인 Total Station에 의해 관측된 기준점 및 검사점과의 정확도를 비교 검토한 결과 X방향으로는 $-0.194{\sim}0.224m$, Y축으로는 $-0.088{\sim}0.180m$, Z축으로는 $-0.286{\sim}0.285m$ 정도의 오차를 얻을 수 있었다. 또한, 검사점에 대한 오차의 RMSE를 표현하면, X축 방향으로 0.021388m, Y축 방향으로 0.015285m, Z축 방향으로 0.041872m로 나타났다. 이러한 사진촬영 및 분석방법으로 기존의 Total Station 측량방법보다 더 많은 지형표고자료를 취득하는데 좋은 방법이라 판단된다.

• Investigative Magnetic Resonance Imaging
• /
• 제25권3호
• /
• pp.141-155
• /
• 2021

Purpose: To develop a 3D magnetic resonance fingerprinting (MRF) method for application in high resolution knee cartilage PD, T₁, T₂ mapping. Materials and Methods: A novel 3D acquisition trajectory with golden-angle rotating radial in k_xy direction and interleaved echo planar imaging (EPI) acquisition in the k_z direction was implemented in the MRF framework. A centric order was applied to the interleaved EPI acquisition to reduce Nyquist ghosting artifact due to field inhomogeneity. For the reconstruction, singular value decomposition (SVD) compression method was used to accelerate reconstruction time and conjugate gradient sensitivity-encoding (CG-SENSE) was performed to overcome low SNR of the high resolution data. Phantom experiments were performed to verify the proposed method. In vivo experiments were performed on 6 healthy volunteers and 2 early osteoarthritis (OA) patients. Results: In the phantom experiments, the T₁ and T₂ values of the proposed method were in good agreement with the spin-echo references. The results from the in vivo scans showed high quality proton density (PD), T₁, T₂ map with EPI echo train length (N_ETL = 4), acceleration factor in through plane (R_z = 5), and number of radial spokes (N_spk = 4). In patients, high T₂ values (50-60 ms) were seen in all transverse, sagittal, and coronal views and the damaged cartilage regions were in agreement with the hyper-intensity regions shown on conventional turbo spin-echo (TSE) images. Conclusion: The proposed 3D MRF method can acquire high resolution (0.5 mm³) quantitative maps in practical scan time (~ 7 min and 10 sec) with full coverage of the knee (FOV: 160 × 160 × 120 mm³).

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.667-670
• /
• 2005

Ground control points(GCPs) can be extracted from SAR data given precise orbit for DTM generation using optic images and other SAR data. In this study, we extract GCPs from ERS SAR data and SRTM DEM. Although it is very difficult to identify GCPs in ERS SAR image, the geometry of optic image and other SAR data are able to be corrected and more precise DTM can be constructed from stereo optic images. Twenty GCPs were obtained from the ERS SAR data with precise Delft orbit information. After the correction was applied, the mean values of planimetric distance errors of the GCPs were 3.7m, 12.1 and -0.8m with standard deviations of 19.9m, 18.1, and 7.8m in geocentric X, Y, and Z coordinates, respectively. The geometries of SPOT stereo pair were corrected by 13 GCPs, and r.m.s. errors were 405m, 705m and 8.6m in northing, easting and height direction, respectively. And the geometries of RADARS AT stereo pair were corrected by 12 GCPs, and r.m.s. errors were 804m, 7.9m and 6.9m in northing, easting and height direction, respectively. DTMs, through a method of area based matching with pyramid images, were generated by SPOT stereo images and RADARS AT stereo images. Comparison between points of the obtained DTMs and points estimated from a national 1 :5,000 digital map was performed. For DTM by SPOT stereo images, the mean values of distance errors in northing, easting and height direction were respectively -7.6m, 9.6m and -3.1m with standard deviations of 9.1m, 12.0m and 9.1m. For DTM by RADARSAT stereo images, the mean values of distance errors in northing, easting and height direction were respectively -7.6m, 9.6m and -3.1m with standard deviations of 9.1m, 12.0m and 9.1m. These results met the accuracy of DTED level 2

• 대한기계학회논문집A
• /
• 제27권7호
• /
• pp.1227-1233
• /
• 2003

NURBS (Non Uniform Rational B-Spline) is widely used in CAD system and NC data for high speed machining. Conventional CAM system changes NURBS surface to tessellated meshes or Z-map model, and produces linear tool path. The linear tool path is not good fur precise machining and high speed machining. In this paper, an algorithm to change linear tool path to NURBS one was studied and the machining result of NURBS tool path was compared with that of linear tool path. The N-post including both a post-processing and a virtual machining software was developed. The N-Post transforms linear tool path to NURBS tool path and quickly shades a machined product on OpenGL view, while comparing a machined surface with a original CAD one. A virtulal machined model of original tool path and post-processed tool path was compared to original CAD model. The machining error and machining time of post-processed NURBS tool path were investigated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1111-1117
• /
• 2003

NURBS (Non Uniform Rational B-Spline) is widely used in CAD system and NC data for high speed machining. Conventional CAM system changes NURBS surface to tessellated meshes or Z-map model, and produces linear tool path. The linear tool path is not good for precise machining and high speed machining. In this paper, an algorithm to change linear tool path to NURBS one was studied, and the machining result of NURBS tool path was compared with that of linear tool path. The N-post, post-processing and virtual machining software was developed. The N-Post post-processes linear tool path to NURBS tool path and quickly shades machined product on OpenGL view and compares a machined product with original CAD surface. A virtual machined model of original tool path and post-processed tool path was compared to original CAD model. The machining error of post-processed NURBS tool path was reduced to 43%. The original tool path and NURBS tool path was used to machine general model using same machine tool and machining condition. The machining time of post-processed NURBS tool path was reduced up to 38%.

• 로봇학회논문지
• /
• 제14권4호
• /
• pp.357-362
• /
• 2019

This paper proposes a model and train method that can real-time detect objects and distances estimation based on a monocular camera by applying deep learning. It used YOLOv2 model which is applied to autonomous or robot due to the fast image processing speed. We have changed and learned the loss function so that the YOLOv2 model can detect objects and distances at the same time. The YOLOv2 loss function added a term for learning bounding box values x, y, w, h, and distance values z as 클래스ification losses. In addition, the learning was carried out by multiplying the distance term with parameters for the balance of learning. we trained the model location, recognition by camera and distance data measured by lidar so that we enable the model to estimate distance and objects from a monocular camera, even when the vehicle is going up or down hill. To evaluate the performance of object detection and distance estimation, MAP (Mean Average Precision) and Adjust R square were used and performance was compared with previous research papers. In addition, we compared the original YOLOv2 model FPS (Frame Per Second) for speed measurement with FPS of our model.