• 조명전기설비학회논문지
• /
• 제22권12호
• /
• pp.176-182
• /
• 2008

본 연구는 실내공기와 상수의 수질개선을 위하여 소형 평판형 오존발생기(plate-type ozonizer : PTO)를 개발하여 그 특성을 규명한 논문이다. 평판전극의 크기, 개수 및 배치에 따라 다양한 형태의 오존발생기가 고안되었다. 각 형태의 오존발생기의 방전면적은 60[$cm^2$]로 동일하며 방전전력은 최대 30[W]이다. 주요 연구 대상은 방전전력-오존생성농도 특성, 방전전력-오존생성수율 특성, 유량-오존생성농도 특성 및 유량-오존생성수율 특성이다. 오존생성특성은 PTOL-P가 가장 우수하게 나타났으며, 나머지 3종류의 오존발생기($PTO_{P-P}$, $PTO_{C-P}$, $PTO_{T-P}$)에서는 유사한 결과를 얻을 수 있었다.

• 한국작물학회지
• /
• 제47권6호
• /
• pp.422-426
• /
• 2002

비염해지인 육답에 대한 간척답의 염농도가 0.2%, 0.3%, 0.4%인 지역에서 수도 생육 및 수량반응을 비교 검토하여 수도의 내염성 및 품종육성의 기초자료를 얻고자 일반계 품종 6품종 통일형 5품종을 공시한 결과는 다음과 같다. 1. 출수지연 정도는 육답 대비 0.2%포장에서는 일반계 품종은 2일, 통일형품종은 3일이 지연되었고, 0.3%포장에서는 일반계품종이 5일, 통일형품종이 8일, 그리고 0.4%포장에서는 각각 10일과 13일이 지연되었다. 2. 간장은 일반계품종이 13-39%, 통일형품종이 12-35% 감소율을 보였고, 수수는 일반계품종이 16-40%, 통일형품종이 14-35% 감소율을 나타내어 간장 및 수수의 감소율은 일반계 품종이 더 심하였다. 3. 수당립수는 일반계품종과 통일형품종 공히 10-40%의 감수율을 보였으나, 등숙율은 일반계품종 20-48%와 통일형품종 19-52%의 감수율을 보여, 통일형품종이 더 심하였다. 4. 천립중은 23% 이내의 비교적 적은 감소율을 보인 반면, 수량은 일반계 품종은 20-62%, 통일형품종은 25-68%의 감소율을 보여 통일형품종이 더 컸다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 C
• /
• pp.2141-2143
• /
• 2000

In this paper, high concentration yield multi-discharge type ozonizer (MDO) of new discharge type using superposed silent discharge was designed and manufactured, MDO can be consisted with 3 kind of multi discharge type ozonizer (MDO) in accordance with power supply method that supplying power, which has 180[$^{\circ}$] phase difference, to 3 electrodes and double gap. At the moment, discharge characteristics and ozone generation characteristics of each MDO were investigated in accordance with quantity of supplied gas, the number of MDO, and the shapes of each MDO. In result, ozone generation characteristics of 17185[ppm] and 783[g/kWh] were obtained, and when ozone of 17185 [ppm] was in contact with dyeing water waste, decolorization characteristics was excellent, so it confirmed that MDO could be used as water environment improvement facility.

• Nuclear Engineering and Technology
• /
• 제53권3호
• /
• pp.911-919
• /
• 2021

In this paper, the design stress intensity values for the plate-type fuel assembly for research reactor are presented. Through a tensile test, the material properties of the cladding (aluminum alloy 6061) and structural material (aluminum alloy 6061-T6), in this case the yield and ultimate tensile strengths, Young's modulus and the elongation, are measured with the temperatures. The empirical equations of the material properties with respect to the temperature are presented. The cladding undergoes several heat treatments and hardening processes during the fabrication process. Cladding strengths are reduced compared to those of the raw material during annealing. Up to a temperature of 150 ℃, the strengths of the cladding do not significantly decrease due to the dislocations generated from the cold work. However, over 150 ℃, the mechanical strengths begin to decrease, mainly due to recrystallization, dislocation recovery and precipitate growth. Taking into account the uncertainty of the 95% probability and 95% confidence level, the design stress intensities of the cladding and structural materials are established. The presented design stress intensity values become the basis of the stress design criteria for a safety analysis of plate-type fuels.

• Journal of Animal Science and Technology
• /
• 제63권2호
• /
• pp.405-416
• /
• 2021

The aim of the study was to determine the effect of whole milk powder (WMP) as heterologous proteins on chicken breast emulsion-type sausages. The quality properties of WMP on such chicken breast emulsion-type sausages were investigated by measuring the proximate composition, pH, color, cooking yield, protein solubility, and by applying other methods, such as texture profile analysis (TPA), microphotograph, sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE), and electronic nose. The crude fat, protein, and ash contents of 15% WMP samples were significantly higher than the control samples (p < 0.05). The redness of the cooked samples significantly increased with an increase in the WMP contents (p < 0.05). The cooking yield of WMP treated samples was significantly higher than the control sample (p < 0.05). Additionally, the hardness, gumminess, and chewiness of WMP treated samples were significantly higher than the control sample (p < 0.05). The sarcoplasmic and myofibrillar proteins of samples containing 15% WMP were significantly higher than the control samples (p < 0.05). The result of SDS-PAGE showed that the C protein, sarcoplasmic protein, actin, and tropomyosin increased with an increase in the WMP contents. The principal component analysis plot of WMP-treated samples was clearly different from that of the control samples. Based on these results, it was predicted that WMP could be useful as heterologous protein on emulsion-type sausage.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.280-280
• /
• 2022

Tiller angle, defined as the angle between the main stem and its side tillers, is one of the main target traits selected inbreeding to achieve the ideal plant type and increase rice yield. Therefore, the discovery and identification of tiller angle-related genes can provide architecture and yield. In the present work, using QTL analysis hence a total of 8 quantitative trait loci (QTLs) were detected based on the phenotype data of tiller angle and tiller crown width in two years. Among them, four QTLs (qTA9, qCW9, qTA9-1, qCW9-1) were overlapped at marker interval RM6235-RM24288 on chromosome 9 with a large effect value regarded as stable major QTL. Twenty tiller angle-related genes were selected from the target region and the relative gene expression levels were checked in five compact type lines, five spreading type lines, and their parental lines. Finally, OsSA URq9 which belongs auxin-responsive SMALL AUXIN UP RNA (SAUR) protein family was selected as a target gene. Overall, this work will help broaden our understanding of the genetic control of tiller angle and tiller crown width, and this study provides both a good theoretical basis and a new genetic resource for the breeding of ideal-type rice.

• 한국육종학회지
• /
• 제50권4호
• /
• pp.516-521
• /
• 2018

신품종 '누리찰'은 찰성 쌀보리 신품종으로 국립식량과학원에서 계통육종법으로 육성하였다. 3개 지역에서 답리작 지역적응시험을 실시한 결과 답리작 적응성이 높으며, 쓰러짐에 강하고 수량이 7-16% 증가된 보리밥 특성이 좋은 계통임이 입증되었다. 출수기와 성숙기는 답리작에서 새찰쌀보리보다 각각 1일 늦었다. 간장은 82 cm로 중장간, 수장 4.0 cm, $m^2$당 수수는 774개로 새찰쌀보리와 많았으며 천립중은 25.0 g으로 새찰쌀보리보다 가벼웠고 도복에 강하고 보리호위축병에 저항성을 보였다. 단백질 함량은 새찰쌀보리보다 적었고, ${\beta}-glucan$, 전분, 아밀로스 함량은 새찰쌀보리와 비슷하였다. 흡수율은 비슷하였고 퍼짐성은 다소 높았다. 호화특성은 최고점도가 높고 치반점도가 낮았으며, 보리밥 물성은 경도, 탄력성, 저작성이 새찰쌀보리보다 낮아 보리밥이 다소 부드러운 특성을 보였다. 평균수량성은 답리작에서 4.00 MT/ha로 새찰쌀보리보다 10% 증가하였다.

• 전기학회논문지
• /
• 제58권4호
• /
• pp.783-787
• /
• 2009

A point-to-mesh type discharge system, utilizing a water-pen point as a corona discharge electrode and a mesh as an ion induction electrode, has been proposed, and the effect of the water-pen point electrode of the discharge system to the ionic wind velocity and generation yield was investigated. It was observed that the proposed discharge system with the water-pen point electrode can generate a higher ionic wind velocity as compared with that of the metal point electrode. As a result, the peak ionic wind velocities of 2.61 and 4.05 m/s for the positive and negative corona discharges of the proposed discharge system can be obtained, which are 1.39 and 1.15 times higher than those of the metal point electrode with same design. The ionic wind generation yield of 4.72 m/s/W of the discharge system with the water-pen point electrode was obtained for the positive corona, which was 3.66 times higher than that of the metal point electrode. This enhancement may be due to the effect of the water-pen point electrode.

• Steel and Composite Structures
• /
• 제1권3호
• /
• pp.295-312
• /
• 2001

The purpose of this paper is to propose a new type of steel reinforced concrete (SRC) beam-column joints and to examine the structural performance of the proposed joints, which simplify the construction procedure of steel fabrication, welding works, concrete casting and joint strengthening. In the proposed beam-column joints, the steel element of columns forms continuously built-in crossing of H-sections (${\Box}$), with adjacent flanges of column being connected by horizontal stiffeners in a joint at the level of the beam flanges. In addition, simplified lateral reinforcement (${\Box}$) is adopted in a joint to confine the longitudinal reinforcing bars in columns. Experimental and analytical studies have been carried out to estimate the structural performance of the proposed joints. Twelve cruciform specimens and seven SRC beam-column subassemblage specimens were prepared and tested. The following can be concluded from this study: (1) SRC subassemblages with the proposed beam-column joints show adequate seismic performances which are superior to the demand of the current code; (2) The yield and ultimate strength capacities of the beam-to-column connections can be estimated by analysis based on the yield line theory; (3) The skeleton curves and the ultimate shear capacities of the beam-column joint panel are predicted with a fair degree of accuracy by considering a simple stress transfer mechanism.

• 한국작물학회지
• /
• 제44권2호
• /
• pp.117-121
• /
• 1999

Spikelet and vascular bundle development in rice panicles is considered to be the important elements in determining the genotype's yield capacity and translocation ability of assimilates into grains, respectively. This study was conducted to clarify the varietal differences of the spikelet and vascular bundle formations among three rice cultivars; Iksan 435 (japonica), Dongjinbyeo (japonica) and Namcheonbyeo (Tongl-type). Iksan 435 had more primary rachis branches (PRBs), secondary rachis branches (SRBs) and spikelets per panicle than Dongjinbyeo, but less than Namcheonbyeo. Among three cultivars, Namcheonbyeo showed the highest spikelet number per panicle which were differentiated SRBs mainly on PRBs of lower rachis nodes. And Namchenbyeo showed the highest number of large vascular bundle (LVB) as well as small vascular bundle (SVB) and it displayed the largest diameter of LVB. Between the two japonica cultivars, the numbers of LVBs end SVBs were significantly higher in Iksan 435 than those in Dongjinbyeo. The PRBs to LVBs ratio of Namcheonbyeo was twice as large as those of Dongjinbyeo and Iksan 435. These results indicate that the newly bred cultivar, Iksan 435, has improved yield capacity by increasing the number of especially rachis branches and spikelets formation as well as 1,000 grain weight, compared to other former japonicas.