• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.4
• /
• pp.360-365
• /
• 1991

This experiment was conducted to determine mechanized seeding ability of barley drill seeder on the seeding time, growth and yield of sorghum-sudangrass hybrid. The time required for machine drill seeding was 42 minutes per l0a which was one-thirteenth of the time required by the manual drill seeding, and percentage of seedling establishment by machine drill seeding was better than that of manual drill seeding. Leaf area index in seeding rate with 30 x 5cm and 40 x 5cm of machine drill seeding was higher than those of manual drill seeding, the leaf distribution was better and the total nonstructural carbohydrate content of stubble after cutting was short increased than that of manual drill seeding, Content of feed composition was not significantly different between manual and machine drill seeding. At seeding rate of 40 x 5cm of machine seeding. dry matter and TDN yield were increased to 29% and 30% respectiyely, than those of manual drill seeding.

• Journal of Sericultural and Entomological Science
• /
• v.13 no.2
• /
• pp.123-133
• /
• 1971

The author is the first man who tried to use an anesthetic on insect specially for silkworm in orde to evaluate the silkworm health and silk yielding ability and the obtained results are as followings. 1. The necessary ether vapor induction for narcosis on silkworms is varied by the glowth of the silkworm which the larger worm is, the longer induction is required. For instance, it was 2∼3 minutes for the worms of third day fifth instar silkworm in case use of ether anesthetic. 2. The longer anesthetic induction for silkworms, the longer recovery needs from anesthesia. In case five minutes ether vapor induction, silkworms recovered narcosis during in 5∼130 minutes which had varied very much by the health variation. 3. The ether induction caused silkworm to vomit digestive juice from a few per cent of the worms, but the chloroform induction showed majority of the worms to vomit the digestive juice out of mouth. So, the ether was found as better anesthetic for silkworms. 4. When ether induction last more than 20∼30 minutes, the recovered silkworms can eat mulberry, but when it gets more than three hours they can not eat mulberry. And when it last more than ten minutes, the silkworm may eat mulberry leaf, but they can not spinn cocoon properly. 5. In case five minutes ether induction for silkworms on third day fifth instar, the stronger variety is, the rallier recovered from narcosis. 6. The recovering duration from narcosis varies regarding with each worm health which shows Poisson′s distribution even in a same variety silkworm. 7. The female worms recover from narcosis earlier than male worms which means the female worm is stronger than male one. 8. The later recovered silkworm from narcosis spinned more rich cocoon silk and ended with smaller pupae weight. Such a tendency showed until at some recovery duration, then the silk yield droped down on the worms recovered in more longer duration. The author (Choe) had named such a relation curve as "Silk Yield Curve against Silkworm Health." 9. The silk yield or cocoon layer ratio had varied from 13 to 27% even in a same worm varity cocoon which showed serious variation and call attention carefulness for the duplication work of a variety silkworm eggs. 10. Not always the rich silk yielding worm is the best worm during the silkworm selection and it should be considered with the silkworm health evaluation. 11. At present situation, only specific breeding expert is allowed to join in the selection service because of need many years experience by use of visual observation, but the ether anesthesia method may help such an evaluation with more accuracy and easy way even for the people in fresh on the field. 12. The effect of the narcosis on the silkworm for the next generation or hybrid worm will be reported in next publication.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6A
• /
• pp.513-523
• /
• 2010

For continuous I-girder bridges, a large negative bending moment is generated near pier region so that plastic hinge is first formed at this point. Then, the bending moment is redistributed when the I-girder has enough flexural ductility (or rotational capacity). However, for I-girder with high strength steel, it is known that the flexural ductility is considerably decreased by increasing the yield strength of material. Thus, it is necessary to conduct a study for guaranteeing proper flexural ductility of I-girder with high-strength steel. In this study, the evaluation of flexural ductility of negative moment region of I-girder with high strength steel where yield stress of steel is 680 MPa is presented based on the results of finite element analysis and experiment. From the results, it is found that the flexural ductility of the I-girder is significantly reduced due to the increase of elastic deformation and the decrease of plastic deformation ability of the material when the yield strength increases. In this study, the method to improve the flexural ductility of I-girder with high strength steel is proposed by an unequal installation of cross beam and an optimal position of cross beam is also suggested. Finally, the effects of the unequal installation of cross beam on the flexural ductility are discussed based on the experimental results.

• Journal of Korean Society of Forest Science
• /
• v.83 no.1
• /
• pp.12-19
• /
• 1994

Studies were made to find out the mycelial growth and rotting characteristics of 91 Lentinus edodes isolates collected or hybridized in Korea and abroad, and their adaptability to bag-culture. The results are as follows. 1. There were little differences in mycelial growth at PDA and oak (Quercus mongolica) sawdust-based medium, and rotting among high-, mid- and low temperature types of L. edodes isolates. But, the fruit yield of high-temperature type was much higher than those of the other two types. The fruit yields of the isolates in the same strain group were apparently different. 2. From the sawdust-based culture of 91 isolates, FRI 221, FRI 208 and FRI 169 were selected as excellent strains in yield and Quality, showing fruiting of 157g, 152g and 119g per 1kg-medium, respectively. 3. Attempts to culture in various media with different substrates resulted in almost same fruit yields, and the yield was proportional to medium weights as 2.5kg-medium showed 2.5 times more yield than 1kg-medium. Fruit yields were different according to incubation periods and the period of little more than 100days was best. 4. When the correlation analyses among mycelial growth, rotting ability, yield and fruit-shape normality were made with the 91 isolates, mycelial growth at sawdust-based medium showed highly positive correlation with that at PDA, while fruit yield was negatively correlated with mycelial growth in PDA and sawdust-based medium.

• Journal of Animal Science and Technology
• /
• v.45 no.4
• /
• pp.649-658
• /
• 2003

Early introducing the ducks into the paddy field involves a variety of environmental changes such as new surroundings and contact with water, so that some free-ranged ducks show behavioral and physiological changes indicative of stress or die from not adapted for new circumstances. Moreover, the free-ranged ducks was tread on the rice plant, and required a great deal of labor and time for captured the ducks after finishing the introducing. The aim of the present study was to examine the effect of accustoming and imprinting of duckling on behavior patterns, body weight gain and yield of the rice plant in paddy fields. Three paddy plots were used as control (no imprinting and no contact with people), taming (imprinting and regular handling) and roughness (handling roughly and strike terror to ducks) plots. Right after introducing the ducks into the paddy field, eating and moving behaviour of taming plot ducks tended to be longer time spend than that of other treatments. However, eating and moving time tended to be longer in the control than that of other two treatments on the 2 weeks after. Flighting distance was not showed in the free-ranging period taming plot, but the control plot was significantly (P<0.05) longer than the roughness plot. The captured time of free-ranged ducks tended to be shorter in the order of taming, control and roughness plots. Body weight gains was not significant. The number of rice plants damaged by free-ranging ducks in the taming plot were significantly (P<0.05) less than that in the control plot, but the yield and yield components of the rice plant were not differ among 3 treatments. These results indicated that the imprinting or regular handling and related treatments of duckling was reducing badly damage of rice plants, captured time and labor of free-ranged ducks in paddy field, although the working behavior of ducks and yield ability of the rice plants were not affected.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.2
• /
• pp.281-313
• /
• 1976

To obtain fundamental informations on cotton breeding efficiences for Korea, individual genetic relationships and interrelationships between the agronomic characteristics of Upland cotton were investigated. These experiments were couducted at the Mokpo Branch Station $(34^{\circ}48'N, $ $126^{\circ}23'E$ and altitude of 10m above sea level) from 1969 through 1972. Heterosis, combining ability, dominance and recessive gene action, genetic variance, and phenotypic and genotypic correlation were investigated by $F_1'S$ from an 11-parent partial diallel cross and the segregating $F_2$ and $F_3$ populations of the cross Paymaster times Heujueusseo Trice. The following points resulted from this study, 1. Heteroses for number of bolls per plant and lint yield were significant at 27, 84% and 37.26%, respectively. No other character had significant heteroses. 2. The GCA estimates for all studied characteristics were higher than the SCA estimates. Varieties with high GCA effects were Suwon 1 for earliness, Paymaster and Arijona for high lint percent, and Arijona for long fiber, etc, 3. SCA estimates for lint yield varied widely in crosses with Mokpo 4, Mokpo 6 and Heujueusseo Trice. Those crosses with the highest SCA effects were combinations with large characteristics differences, Example of these crosses are Mokpo 4 times Acala 1517W, Mokpo 4 times D. P. L. and Heujueusseo Trice aud Paymaster. 4. Early-maturing varieties were completely dominant to late-maturing varieties in some combinations while other crosses gave intermediate phenotypes. These results suggest additive genetic action by multi-genes. Heujueusseo Trice, Mokpo 6, and Suwon 1 showed highest degree of dominance for earliness. 5. There were no significant trends for inheritance of weight of boll and 100 seeds weight. 6. Long staple was partially to completely dominant to short staple. Though there were single gene ratios the rate of dominance decreased in the $F_2$ and $F_3$ populations in the cross between the long staple variety Paymaster and the short staple variety Heujueusseo Trice. Diallel cross $F_1$ hybrids showed complicated allelic gene action for staple length. Various dominance degree were shown by varieties. 7. Number of bolls per plant indicated strong over-dominance and small non-allelic additive gene action. 8. Lint Yield was characterized by over-dominance and by multiple non-allelic-gene action. High-yielding varieties were dominant to low-yielding ones. However, the low-yielding variety Heujueusseo Trice showed over-dominance, indicating different reactions according to the varieties and combinations. 9. Broad sense heritability for days to flowering was 34-39% while narrow sense heritability was 11%. Large variations of individual plants caused by Korean climatic conditions cause this situation. Heritability estimates for weight of boll was 30% for broad sense and 22% for narrow sense. 10. Heritability estimates for staple length and lint percent were very high suggesting strong selection effects. 11. Narrow sense heritability estimates for number of bolls per plant was 30% in the diallel cross $F_1$ hybrids and 36% in the $F_2$ population of the special cross. Broad sense heritability was estimated at 67% suggesting that. 12. Heritability estimates for lint yield was low due to high over-dominance in the diallel cross $F_1$ hybrids. Heritability estimates for yield was low in the $F_1$ hybrids but high in the $F_2$ and $F_3$ populations. 13. Phenotypic and genotypic correlations between lint percent and days to flowering and between staple length and days to flowering were high in the $F_1, $ $F_2$ and $F_3$ populations. Late-maturing varieties and individuals had long staple and high lint percent in general. As the correlation between days to flowering and lint yield was extremely low, the two traits were considered independent of each other. Days to flowering and number of bolls per plant were negatively correlated in the $F_3$ population, indicating early-maturing individual plants with many bolls may be readily selected. 14. Phenotypic and genotypic correlations between lint percent and staple length were high in $F_1, $ $F_2$ and $F_3$ populations. Accordingly, long staple varieties were high in lint percent. It was recognized that lint yield and lint percent were positively correlated in the diallel cross $F_1$ hybrids, and lint percent and staple length were positively correlated in the $F_2$ population, indicating that lint percent and staple length affect lint yield. 15. Lint yield was significantly and positively phenotypically correlated with number of bolls per plant in $F_1, $ $F_2$ and $F_3$ populations. A high genotypic correlation was also noted indicating a close genetic relationship. The selection efficiencies for a high-yielding variety can be increased when individual plants with many bolls are selected in later generations. The selection efficiencies for good fiber quality can be enhanced when individuals with long staple and high lint percent are selected in early generations.

• Journal of the Korean Wood Science and Technology
• /
• v.39 no.4
• /
• pp.281-290
• /
• 2011

We analyzed the basic characteristics and adsorption property of carbonized materials from thinning byproducts of major Korean wood species for evaluating as charcoal making raw material. Yield of charcoal was decreased with increasing the carbonization temperature for all wood species. Refining degrees was 9.0 at $400^{\circ}C$, 3.3~5.0 at $600^{\circ}C$ and 0 at $800^{\circ}C$, and was no difference among wood species. With increasing the carbonization temperature, the fixed carbon content was also increased, and charcoal from softwoods had more fixed carbon content than that from hardwoods. Specific surface area was increased with increasing the carbonization temperature, softwood charcoal had more specific surface area than that of hardwood. Pinus rigida showed the highest specific surface area. In formaldehyde removal by charcoal, some materials had highest at $600^{\circ}C$ and the others had highest at $800^{\circ}C$. Pinus koraiensis, Qurcus acutissima and MDF showed maximum formaldehyde removal ability at $600^{\circ}C$. Ethylene gas removal ability of charcoal was increased with increasing the carbonization temperature, and the charcoal from Pinus rigida and Robinia pseudoacacia had higher ethylene gas removal ability than the other species.

• Journal of the East Asian Society of Dietary Life
• /
• v.21 no.5
• /
• pp.713-722
• /
• 2011

This study was conducted to monitor the quality characteristics of Acai (Euterpe oleracea Mart.) ethanolic extracts by a response surface methodology. The independent variables in the extraction experiments were ethanol concentration (0~100%), extraction temperature ($35{\sim}95^{\circ}C$), and ratio of solvent to sample (10~30 mL/g). The coefficients of determinations ($R^2$) were 0.9596 (p<0.01), 0.9356 (p<0.01), and 0.8842 (p<0.05) for total polyphenol, total flavonoid, and electron donating ability, respectively. The electron donating ability and nitrite scavenging effect improved with an increase in ethanol concentration as opposed to extraction temperature. Anthocyanin content with extraction conditions was 74.421~291.841 mg/L and the coefficient of determinations ($R^2$) was 0.9792 (p<0.01). ORAC (oxygen radical absorbance capacity) with extraction conditions was 137.73~562.94 ${\mu}moles$ TE/g and increased with an increase in ethanol concentration and a decrease in the ratio of solvent to sample content. Estimated conditions for maximum extraction including yield, total polyphenol, total flavonoid, electron donating ability, anthocyanin content, and ORAC were 28~58% for ethanol concentration, $60{\sim}68^{\circ}C$ for extraction temperature, and 10~12 mL/g for ratio of solvent to sample.

• Food Science and Preservation
• /
• v.23 no.2
• /
• pp.233-238
• /
• 2016

A effect of extraction methods, including stirrer extraction method (SE), ultrasonification extraction method (USE), reflux extraction method (RE), autoclave extraction (AE) and low temperature high pressure extraction (LE) method on the antioxidative and antimicrobial activities of ethanol extracts of Oenothera biennis was investigated. The extraction yield (46.33%), total polyphenol (463.05 mg GAE/g) and flavonoid (71.71 mg RHE/g) content of Oenothera biennis extract obtained by RE were higher than those from other extraction methods. The antimicrobial activity of Oenothera biennis extract was only observed against Bacillus cereus among other tested organisms (Bacillus cereus, Staphylococcus aureus, Escherichia coli and Salmonella Typhimurium). Oenothera biennis obtained by RE showed the best DPPH radical scavenging ability (74.40%), ABTS radical scavenging ability (65.29%), reducing power (1.370 ($OD_{700}$)) and ferrous ion chelating ability (90.14%) compared with other tested extraction methods tested. The RE method was the most efficient method for extracting crude antioxidant and antimicrobial substances from Oenothera biennis. These results suggested that Oenothera biennis obtained by RE could be used as a bioactive and functional material in the food industry.

• Food Science and Preservation
• /
• v.17 no.1
• /
• pp.123-130
• /
• 2010

We compared physiological activities in reflux extracts from Liriope platyphylla leaves and roots. The water extract of roots had the highest solid extraction yield of 53.96%. The greatest level of total polyphenols was 186.88 mg/g in methanol extracts from leaves, whereas water extract from leaves showed the highest concentration of flavonoid compounds, at 159.29 mg/g. The leaf extract had 97.42% of the electron-donating ability (EDA) of the positive control, at 0.5 mg/mL. The superoxide dismutase (SOD)-like activity of water extract of leaves was 9.75% of the positive control value, at 1.0 mg/mL. The nitrite scavenging ability of methanolic extract from leaves was highest, at 40.56% of the positive control level at pH 1.2 and a concentration of 1.0 mg/mL, whereas root extracts were ineffective in this regard. Inhibition of xanthine oxidase by leaf extracts was more than 99% of the positive control value at 1.0 mg/mL, whereas water and methanolic root extracts had activities of 93.75% and 68.47%, respectively. When tyrosinase inhibition was examined, the water extract of leaves had 22.80% of positive control activity but methanolic extracts were inactive. These results indicate that leaves of L. platyphylla will be more useful for development of functional products than the roots, which are used to make medicinal preparations.