• Journal of Fashion Business
• /
• v.23 no.3
• /
• pp.23-34
• /
• 2019

The aim of this study is to explore the possibility utilizing Rhododedron brachycarpum as a new natural dye resource. It was dyed in silk fabric according to different dyeing conditions such as dye concentration, dye bath temperature, dyeing time and dye bath pH. The effect of the mordanting conditions were estimated as dyeability and color changes. Additionally, the colorfastness, antibacterial property, ultraviolet protection properties of the dyed and mordanted silk fabrics were examined. The water-soluble dye of Rhododedron brachycarpum extracted with distilled water was expressed as Yellow Red color. The dye-abilities of silk generally increased depending on the increasing values of dye concentration, dye bath temperature and dyeing duration. The highest K/S values were obtained at a dye concentration of 100% (v/v), a dye bath temperature of $90^{\circ}C$, a dyeing duration 120 minutes and a dyeing of pH 2. The light fastness of dyed and Cu mordanted silk fabrics were found to be 4 grade while Al, Fe mordanted silk fabrics were found to be 2~3 grade. The dry cleaning and rubbing fastness were excellent or good. The fade of washing fastness was not good, however, the stain of washing fastness was excellent. The dyed and Al, Cu mordanted silk fabrics indicated 99.9% reduction rate. The dyed and the mordanted fabrics showed very good ultraviolet protection factors.

• Korean Journal of Plant Resources
• /
• v.27 no.5
• /
• pp.588-592
• /
• 2014

A new Saxifraga fortunei cultivar 'Whitegreen' was bred by crossing between 'Daewoojoo' with Pale Green (Y-G145-C) colored petals and 'Kwanglim' with light Yellow green (Y-G145A) colored petals. The selection and flower characterization were conducted from 2004 to 2008 in greenhouse of Highland Agriculture Research Center, NICS, RDA. Flowering in 'Whitegreen' Showed from September 20 th for 33 days. The number of petals were 11.4 ea., with a width of 1.4 cm and length of 1.4 cm. The plant height was 20.7 cm, and number of leaves per plant was 48.3 ea., with a width of 3.4 cm and length of 3.0 cm. 'Whitegreen' cultivar can be used as a pot flower. 'Whitegreen' plants grown under 50% shade of sunlight have higher degree of acclimation compared to those under direct sunlight. And soft rot disease would occur usually by over-irrigation. 'Whitegreen' cultivar was registered as a novel variety with No. 3456 in Korea seed and variety service on April 2011.

• The Research Journal of the Costume Culture
• /
• v.17 no.6
• /
• pp.1129-1140
• /
• 2009

The pine needles has been used as medicines and it is using as dyeing as well as food. It is distributed through 50% in Korean forest. The pine needles is related to antimicrobial activity, however, dyeing properties of the extract components and effects of them are not well known yet. To examine dyeing properties of the pine needles extract, various fabrics(nylon, silk, wool, and soybean) were dyed under different dyeing conditions, and mordanted with one of five mordants(Al, Sn, Fe, Cr, and Cu). Dye uptake, Colors and Colorfastness of the dyed fabrics were measured. By the K/S values, dye uptake of all the dyed fabrics enhanced as increasing dyeing temperature and dyeing time. The highest K/S values were obtained from the protein fiber(wool and silk) fabrics dyed with water extract at $100^{\circ}C$, and with ethanol extract at $90^{\circ}C$ for 80 minutes. Colors of the dyed fabrics showed variety of yellow, brown and green colors. Colors changed by using Cu, Fe and Cr mordants: Cr-mordanted fabrics into light green, Fe-mordanted fabrics into reddish brown, and Cu-mordanted fabrics into deep green in ethanol extraction. Dry-cleaning fastness of the dyed fabrics presented good to excellent except wool fabrics dyed with ethanol extract. Washing fastness of the dyed nylon and soybean fabrics were good to excellent but wool and silk fabrics showed average grades. Most dyed fabrics were poor to light fastness.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.20-37
• /
• 2017

It is called the "Painted lead glaze pottery" that is painted green, brown, yellow over white or light yellow glazed base among glazed pottery in the Northern Qi Dynasty. Even though the white glazed pot painted green with three ears and the yellow glazed jar painted green with long neck is found in the Fan-cui Tomb in Honghetun Village, Anyang City, Henan Province in 1971, these potteries were not focused in academic circles. While the white glazed pottery found with them was thought as the earliest evidence of the white porcelain that the date is clear, it has constantly been discussed so far. In this paper, focused on the painted lead glaze pottery, the materials from tombs and kiln sites are organized, and based on them, the decoration feature and production technique is analyzed. The emergence time of this pottery is checked by the date of tombs and the social value of this pottery is considered by the position of the buried person. The painted lead glaze pottery of the Northern Qi Dynasty has independent character such as porcelain clay, twice firing burning and painting technique over glazed base. This character emerged from several glazed potteries in the Northern Wei Dynasty and it continued to the Northern Qi Dynasty. At last, the white painted lead glazed pottery appeared. The painted lead glaze pottery was formed by the combination of a shape of the ceramic in Southern China and painting technique after the Northern Wei Dynasty in Northern China.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.26-37
• /
• 2009

This paper suggests a sensor's placement method for detecting the dilemma zone problem when real-time driver's safety service is provided at signalized intersections by multiple pointed traffic sensors using USN environments. For detecting the dangerous situations from vehicles accelerating through yellow intervals, red-light running and stopping abruptly like as dilemma zone problem, VISSIM(microscopic, behavior-based multi-purpose traffic simulation program) is used to perform a real-time multiple detection situation by changing the input data like as various inflow-volume, design speed change, driver perception and response time. As a result, the optimal interval of traffic sensors is 20~27m, and the initialized sensor location from stop-line is different according to road design speed. Moreover, the pattern of detection about dilemma zone is also different according to inflow-volumes. This paper shows that the method is useful to evaluate the sensor's placement problem based on micro-simulation and the results can be used as the basic research for USN services.

• Korean Journal of Materials Research
• /
• v.33 no.7
• /
• pp.315-322
• /
• 2023

In the present work, we address the new route for the green synthesis of manganese dioxide (MnO₂) by an innovative method named the solution plasma process (SPP). The reaction mechanism of both colloidal and nanostructured MnO₂ was investigated. Firstly, colloidal MnO₂ was synthesized by plasma discharging in KMnO₄ aqueous solution without any additives such as reducing agents, acids, or base chemicals. As a function of the discharge time, the purple color solution of MnO₄^- (oxidation state +7) was changed to the brown color of MnO₂ (oxidation state +4) and then light yellow of Mn²⁺ (oxidation state +2). Based on the UV-vis analysis we found the optimal discharging time for the synthesis of stable colloidal MnO₂ and also reaction mechanism was verified by optical emission spectroscopy (OES) analysis. Secondly, MnO₂ nanoparticles were synthesized by SPP with a small amount of reducing sugar. The precipitation of brown color was observed after 8 min of plasma discharge and then completely separated into colorless solution and precipitation. It was confirmed layered type of nanoporous birnessite-MnO₂ by X-ray powder diffraction (XRD), fourier-transform infrared spectroscopy (FT-IR), and electron microscopes. The most important merits of this approach are environmentally friendly process within a short time compared to the conventional method. Moreover, the morphology and the microstructure could be controllable by discharge conditions for the appropriate potential applications, such as secondary batteries, supercapacitors, adsorbents, and catalysts.

• Korean Journal of Food Science and Technology
• /
• v.45 no.3
• /
• pp.339-344
• /
• 2013

Application of intense pulsed light (IPL) treatment is an emerging technology with interesting prospects in food preservation. However, information concerning the factors affecting the inactivation of microorganisms and their impact on the quality of fresh-cut food is scarce. In this study, the effects of IPL treatment on the microbial inactivation and physicochemical change in paprika were determined. The viability of bacteria in paprika treated with IPL decreased slightly with the treatment time. In addition, water content was slightly decreased after IPL treatment regardless of the color of paprika. However, except in red paprika, sugar content increased after IPL treatment. The pH of paprika increased in all samples, and the polyphenol content decreased with treatment time, but these differences were very small. After IPL treatment of paprika, vitamin C content increased in yellow and red samples. Hunter color values-lightness (L), redness (a), and yellowness (b)-increased in red paprika, but all values decreased in orange paprika.

• Fashion & Textile Research Journal
• /
• v.14 no.5
• /
• pp.866-877
• /
• 2012

The natural dyeing of hanji cotton fabrics with guava leaf extract was investigated. The temperature and time of dyeing were $40^{\circ}C$ and $90^{\circ}C$ for eighty minutes, respectively. In addition, the dyebath has been set at pH 5. Sn pre-mordanted fabrics showed the highest K/S value. Regardless of dyeing temperature, K/S values were high when Al, Cu, Fe-mordanted fabrics were dyed in post-mordanting and Sn-mordanted fabrics in pre-mordanting. The dyeing equilibrium was shown at the fourth time of repeated dyeing. In the processing of hanji cotton fabrics, K/S value was high when hanji cotton fabric was treated with soybean milk at $90^{\circ}C$. Similar K/S value of dyeing was shown when fabrics were processed with chitosan, regardless of dyeing temperature. High K/S value of dyeing was seen when fabrics processed with gallnut tannin at 40. Fabrics dyed with acidic water extract showed yellowish color. Fabrics dyed with alkaline water extract showed reddish color, and fabrics dyed with ethanol extract showed greenish yellow color. In case of Sn-mordanted fabrics, the washing fastness level was between 3 to 4, and other dyed fabrics showed low fastness. The dry cleaning fastness also showed very excellent result with level 4-5. The rubbing fastness of the fabrics was better in dry rubbing than in wet rubbing. For the light fastness, all dyed fabrics showed low fastness. For antibacterial activity, the dyed fabrics with guava leaf extract showed 99.9% of high antibacterial activity. Hanji cotton fabric maintained certain deodorization in the state of raw fabric. All dyed fabrics showed higher UV protection rate than control fabric.

• Journal of the Semiconductor & Display Technology
• /
• v.16 no.4
• /
• pp.86-90
• /
• 2017

$Tb^{3+}$ or $Eu^{3+}$ or $Ce^{3+}$-doped $CaYAlO_4$ phosphor were synthesized by solid-state method. $CaYAlO_4:Tb^{3+}$ is shown that the $Tb^{3+}$-doping concentration has a significant effect on the $^5D_4/^5D_3{\rightarrow}7F_J$ (J=6,...,0) emission intensity of $Tb^{3+}$. The $CaYAlO_4:Tb^{3+}$ phosphors show tunable photoluminescence from blue to yellow with the change of doping concentration of $Tb^{3+}$ ions. The $CaYAlO_4:Eu^{3+}$ phosphors exhibit a red-orange emission of $Eu^{3+}$ corresponding to $^5D_0$, $_{1,2}{\rightarrow}^7F_J$ (J=4,...,0) transitions. The $CaYAlO_4:Ce^{3+}$ phosphors show a blue emission due to $Ce^{3+}$ ions transitions from the 5d excited state to the $^2F_{5/2}$ and $^2F_{7/2}$ ground states. The decay time of $CaYAlO_4:Tb^{3+}$ phosphors decrease from 1.33 ms to 0.97 ms as $Tb^{3+}$ concentration increases from 0.1 mol% to 7 mol%. The decay time of $CaYAlO_4:Eu^{3+}$ phosphors increase from 0.94 ms to 1.17 ms as $Eu^{3+}$ concentration increases from 1 mol% to 9 mol%.

• Horticultural Science & Technology
• /
• v.33 no.4
• /
• pp.479-485
• /
• 2015

This study was conducted to study the factors inducing micro-cracking and determine proper practices to reduce its occurrence in 'Mansoo' pear fruits. Micro-cracking was observed on ripe fruits. Occurrence of micro-cracking was closely related to sun duration time in August. Micro-cracking occurred severely with shorter sun duration, but weakly with longer sun duration and continuous sunlight. Micro-cracking fruits occurred more frequently in trees with a pergola training system than in those with Y-trellis, but there was no difference between the irrigated and non-irrigated groups. While no micro-cracking was observed without fruit bagging, micro-cracking occurred in fruits with black and yellow outer paper bagging at rates of 62.2 and 17.3%, respectively. Our results suggest that the light condition was the most important cause of micro-cracking because the occurrence of micro-cracking in 'Mansoo' fruits was affected by factors including sun duration, trellis system and fruit bag color. We suggested that micro-cracking could be reduced in 'Mansoo' fruit by optimizing the light conditions with the proper trellis system, bagging color and summer pruning.