• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 1999.11a
• /
• pp.95-98
• /
• 1999

This paper describes preliminary discussions on spatial distribution of NO density, which is mostly contained in simulated NOX exhaust, between a wire-cylinder geometry discharge gaps by using Laser Induced Fluorescence(LIF) Spectroscopy. Spatial distribution of NO density will be measured with varying NO concentrations from 166 to 644[ppm] and diameters of central electrode from 6 to 10mm. Pulsed Nd:YAG laser, Optical Parametric Oscillator(OPO), and Frequency Doubler are used to excite NO molecules to their excited state.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.2
• /
• pp.263-268
• /
• 2004

The characteristics of Diesel spray droplets, such as the velocity and the diameter were simultaneously measured by using an improved Interferometric Laser Imaging for Droplet Sizing method. The experiments were carried out using an accumulator-type unit injector system and a constant-volume vessel. Two dimensional cross-section photographs of sprays were also taken using a double-pulsed Nd- YAG laser sheet and a linear array CCD camera. As a result, interesting relations between the droplets diameter and the velocity were found.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.694-699
• /
• 2003

Simultaneous measurement with PLIF(Planar Laser-Induced Fluorescence) and Stereo-PIV(Stereoscopic Particle Image Velocimetry) was performed to investigate the structural characteristics of flow field in Rushton Turbine Mixer. Instantaneous 3D velocity fields are measured by two 2K ${\times}$ 2K CCD cameras focused on an object plane with the angular displacement methods while the concentration fields are obtained through the measurement of the fluorescence intensity of Rhodamine B tracer excited by the second pulse of Nd:Yag laser light. Image distortion due to the camera view-angle is compensated by a mapping function. Finally, the spatial structures of turbulent mixing around Rushton turbine were identified by the calculation of cross-correlation fields between the velocity and concentration field.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.11a
• /
• pp.115-116
• /
• 2005

Si nanowires (NWs) were fabricated in vacuum furnace by using a Nd:YAG pulsed laser with the wavelength of 325 nm. Commercial p-type Si wafer is used for target, and any catalytic materials are not used. Scanning electron microscopy (SEM) images indicate that the diameters of Si NWs ranged from 10 to 150 nm. Si NWs have various size and shape with a substrate position inside a furnace, and their morphologic construction is reproducible. The formation mechanism of the NWs is discussed.

• Proceedings of the KIEE Conference
• /
• 1999.11d
• /
• pp.888-890
• /
• 1999

ZnO thin films on (001) sapphire substrates have been deposited by pulsed laser deposition using a Nd:YAG laser with the wavelength of 355 nm at an oxygen pressure of 350 mTorr. In order to investigate the effect of the substrate temperature on the properties of ZnO thin films, the experiment has been performed at various substrate temperatures in the range of $200^{\circ}C$ to $700^{\circ}C$. According to XRD, (002) textured ZnO films of high crystalline quality have been obtained by pulsed laser deposition technique. However, the intensity of UV emission is mostly depending on the stoichiometry of ZnO films.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.11a
• /
• pp.135-138
• /
• 2009

Quality evaluation of laser welded MCFC separator panels with large active area was performed. Lap joint was applied to produce stable air-tight seam weld by employing Nd:YAG laser. Results showed that surface contamination played a key role to form weld defects at the joint interface. However, there was no evidence that weld width at the lap joint changed after the stack operation time of 2,890h. Test results also revealed that the reinforcement values which were measured on the weld line after long time operation, were stable.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2006.06a
• /
• pp.25-30
• /
• 2006

최근 차체 용접의 고속화를 통한 생산성 향상 및 차체 설계의 자유도 향상, 차체 강성 증가를 목적으로 원격 용접, 브레이징 등 다양한 형태로 레이저 적용 기술이 개발되고 있다. 뿐만 아니라, 레이저의 종류에 있어서도 $CO_2$ 레이저, Nd:YAG 레이저, 화이버 레이저, 디스크 레이저등 다양한 형태의 레이저가 사용되고 있으며, 사용자의 목적에 부합하는 여러 형태의 레이저들이 개발되고 있다. 본 연구는 $CO_2$ 레이저 원격 용접의 차체 T/GATE 양산 적용 결과를 바탕으로, 적용 용접점 선정, 용접품질 확보, 생산성 향상을 위한 공정의 최적화 요소들에 대한 개발을 진행하였다.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.411-412
• /
• 2000

Si nanocrstallites on p-tyre (100) Si substrate have been fabricated by pulsed laser deposition technique using a Nd:YAG laser with the wavelength of 355, 532 and 1064 nm. The base vacuum in the chamber was down to $10^{-5}$ Torr and the pressure of the gas during deposition was varied from 1 to 3 Torr. After deposition, Si nanocrystallites have been annealed at $N_2$ gas. Nitrogen have been used as ambient gases. Strong blue and green luminescence from Si nanocrystallites has been observed in room temperature by photoluminescence and its peak energies shift to green when the wavelength is increased from 355-1064 nm

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.422-424
• /
• 2000

ZnO thin films for light emission device have been deposited on sapphire and silicon substrates by pulsed laser deposition technique(PLD). A Nd:YAG laser was used with the wavelength of 355 nm. In order to investigate the emission properties of ZnO thin films, PL measurements with an Ar ion laser as a light source using an excitation wavelength of 351 nm and a power of 100 mW are used. All spectra were taken at room temperature by using a grating spectrometer and a photomultiplier detector. ZnO exhibited PL bands centered around 390, 510 and 640 nm, labeled near ultra-violet (UV), green and orange bands. Structural properties of ZnO thin films are analized with X-ray diffraction (XRD).

• Proceedings of the KIEE Conference
• /
• 1999.07e
• /
• pp.2256-2258
• /
• 1999

This paper describes preliminary discussions on spatial distribution of NO density, which is mostly contained in simulated NOx exhaust, between a wire-cylinder geometry discharge gaps by using Laser Induced Fluorescence(LIF) Spectroscopy, Spatial distribution of NO density will be measured with varying NO concentrations from 166 to 644 [ppm] and diameters of central electrode from 6 to 10mm. Pulsed Nd:YAG laser. Optical Parametric Oscillator(OPO), and Frequency Doubler are used to excite NO molecules to their excited state.