• 한국추진공학회지
• /
• 제23권1호
• /
• pp.79-92
• /
• 2019

Titanium hydride potassium perchlorate (THPP)는 항공우주분야에서 일반적으로 널리 사용되는 불꽃점화장치중 하나이다. 현 연구에서는 THPP에 수분 열 노화를 가했을 때, 연소과정에 끼치는 영향과 변화된 결과들을 실험적으로 밝혀내었다. 우선, Differential Scanning Calorimetry (DSC)와 isoconversional method를 적용하여 노화된 THPP 시료의 반응개시지연 및 최대반응속도의 저하를 확인하였다. 반응속도 파라미터는 첫 번째 반응에서 Viton에 의해 낮아지며 후에 잔류한 $KClO_4$의 영향으로 상승하는 경향을 보였다. 그리고 X-ray photoelectron spectroscopy (XPS)를 통해 노화된 THPP 시료에서 산화제 성분은 감소하고 연료산화효과가 두드러짐을 확인하였다. 또한 NASA Chemical Equilibrium with Applications (CEA)을 사용하여 얻은 이론발열량이 DSC로부터 구한 실험적 발열량과 비슷한 경향을 따르므로 실험적으로 구한 발열량 트렌드가 타당함을 검증할 수 있었다.

• 한국결정성장학회지
• /
• 제22권2호
• /
• pp.84-91
• /
• 2012

Single and few-layer graphene nanosheets (GNs) have successfully synthesized by a modified Hummer's method followed by chemical reduction of exfoliated graphene oxide (GO) in the presence of hydrazine monohydrate. GO and GNs were characterized by X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR), X-ray diffractions (XRD), Raman spectroscopy, Transmission electron microscopy (TEM), Atomic force microscopy (AFM), Optical microscopy (OM) and by electrical conductivity measurements. The result showed that electrical conductivity of GNs was significantly improved, from $4.2{\times}10^{-4}$ S/m for GO to 12 S/m for GNs, possibly due to the removal of oxygen-containing functional group during chemical reduction. In addition, the $NO_2$ gas sensing characteristics of GNs are also discussed.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.398-398
• /
• 2013

The electronic properties and the local structure of tantalum oxide thin film with variation of oxygen flow rate ranging from 9.5 to 16 sccm (standard cubic centimeters per minute) have been investigated by X-ray photoelectron spectroscopy (XPS), Reflection Electron Energy Loss Spectroscopy (REELS), and X-ray absorption spectroscopy (XAS). The XPS results show that the Ta4f spectrum for all films consist of the strong spin-orbit doublet $Ta4f_{7/2}$ and $Ta4f_{5/2}$ with splitting of 1.9 eV. The oxygen flow rate of the film results in the appearance of new features in the Ta4f at binding energies of 23.2 eV, 24.4 eV, 25.8, and 27.3 eV, these peaks attribute to $Ta^{1+}$, $Ta^{2+}$, $Ta^{4+}$/$Ta^{2+}$, and $Ta^{5+}$, respectively. Thus, the presence of non-stoichiometric state from tantalum oxide ($TaO_x$) thin films could be generated by the oxygen vacancies. The REELS spectra suggest the decrease of band gap for tantalum oxide thin films with increasing the oxygen flow rate. The absorption coefficient ${\mu}$ and its fine structure were extracted from the fluorescence mode of extended X-ray absorption fine structure (EXAFS) spectra. In addition, bond distances (r), coordination numbers (N) and Debye-Waller factors (${\sigma}^2$) each film were determined by a detailed of EXAFS data analysis. EXAFS spectrapresent both the increase of coordination number of the first Ta-O shell and a considerable reduction of the Ta-O bond distance with the increase of oxygen flow rate.

• Current Photovoltaic Research
• /
• 제4권1호
• /
• pp.21-24
• /
• 2016

Chalcopyrite based (CIGS) thin films have considered to be a promising candidates for industrial applications. The growth of quality CIGS thin films without secondary phases is very important for further efficiency improvements. But, the identification of complex secondary phases present in the entire film is crucial issue due to the lack of powerful characterization tools. Even though X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS) and normal Raman spectroscopy provide the information about the secondary phases, they provide insufficient information because of their resolution problem and complexity in analyzation. Among the above tools, a normal Raman spectroscopy is better for analysis of secondary phases. However, Raman signal provide the information in 300 nm depth of film even the thickness of film is > $1{\mu}m$. For this reason, the information from Raman spectroscopy can't represent the properties of whole film. In this regard, the authors introduce a new way for identification of secondary phases in CIGS film using depth Raman analysis. The CIGS thin films were prepared using DC-sputtering followed by selenization process in 10 min time under $1{\times}10^{-3}torr$ pressure. As-prepared films were polished using a dimple grinder which expanded the $2{\mu}m$ thick films into about 1mm that is more than enough to resolve the depth distribution. Raman analysis indicated that the CIGS film showed different secondary phases such as, $CuIn_3Se_5$, $CuInSe_2$, InSe and CuSe, presented in different depths of the film whereas XPS gave complex information about the phases. Therefore, the present work emphasized that the Raman depth profile tool is more efficient for identification of secondary phases in CIGS thin film.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제49권5호
• /
• pp.265-269
• /
• 2000

$(Ba, Sr)TiO_3$thin films were etched with a magnetically enhanced inductively coupled plasma (MEICP) at different CF4/Ar gas mixing ratios. Experimental was done by varying the etching parameters such as rf power, dc bias and chamber pressure. The maximum etch rate of the BST films was $1800{AA}/min$ under $CF_4/(CF_4+Ar)$ of 0.1, 600 W/350 V and 5 mTorr. The selectivity of BST to Pt and PR was 0.6, 0.7, respectively. X-ray photoelectron spectroscopy (XPS) results show that surface reaction between Ba, Sr, Ti and C, F radicals occurs during the (Ba, Sr)TiO3 etching. To analyze the composition of surface residue after the etching, films etched with different CF_4/Ar$ gas mixing ratio were investigated using XPS and secondary ion mass spectroscopy (SIMS).

• 한국전기전자재료학회논문지
• /
• 제11권10호
• /
• pp.804-808
• /
• 1998

The inductively coupled plasma(ICP) etching of platinum with BCl$_3$/Cl$_2$ gas chemistry has been studied. X-ray photoelectron spectroscopy (XPS) was used to investigate the chemical binding states of the etched surface. The plasma characteristics was extracted from optical emission spectroscopy (OES) and a single Langmuir probe. In this case of Pt etching using BCl$_3$/Cl$_2$ gas chemistries, the result of OES and Langmuir probe showed the increase of Cl radicals and ion current densities in the plasmas with increasing Cl$_2$ gas ratio. At the same time, XPS results indicated that the intensities of Pt 4f decreased with increasing Cl$_2$ gas ratio. The decrease of Pt 4f intensities implies the increase of residue layer thickness on the etched Pt surface.

• 전자공학회논문지
• /
• 제50권7호
• /
• pp.115-121
• /
• 2013

본 연구에서는 TiInZnO(TiIZO)를 채널층으로 하는 thin film transistors(TFTs)를 제작하였다. TiIZO 층은 InZnO(IZO)와 Ti target을 이용하여 RF-magnetron co-sputtering system 방식으로 상온에서 증착하였으며, 어떠한 열처리도 하지 않았다. Ti의 첨가가 어떠한 영항을 주는지 연구하기 위해 X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS) 분석을 시행하였으며, 전기적인 특성을 측정하였다. Ti의 첨가는 Ti target의 rf power 변화에 따라 달리하였다. Ti의 첨가가 전류점멸비에 큰 영향을 주는 것을 확인하였고, 이것은 Ti의 산화력이 In과 Zn보다 뛰어나 산소결함자리의 형성을 억제하기 때문이다. Ti의 rf power가 40W일 때 가장 좋은 특성을 나타냈으며, 전류점멸비, 전자이동도, 문턱전압, subthreshold swing이 각각 $10^5$, 2.09 [$cm^2/V{\cdot}s$]. 2.2 [V], 0.492 [V/dec.]로 측정되었다.

• Journal of Information Display
• /
• 제6권1호
• /
• pp.28-32
• /
• 2005

The electronic structures of Al/RbF/tris-(8-hydroxyquinoline)aluminium ($Alq_3$) and $Al/CaF_2/Alq_3$interfaces were investigated using x-ray photoelectron spectroscopy (XPS) and ultraviolet photoelectron spectroscopy (UPS). For both systems, the UPS showed a significant valence band shift following the deposition of the thin fluoride layers on $Alq_3$. However, the formation of gap state in valence region and the extra peak N 1s core level spectra showed different trends, suggesting that the alkali fluoride and alkali-earth fluoride interlayer have different reaction mechanisms at the interface between Al cathode and $Alq_3$. In addition, the deposition of Al has considerably less effect on the valence band shift compared to the deposition of both RbF and $CaF_2$. These results suggest that the charge transfer across the interface and the resulting gap state formation may have lesser effect on the enhancement of organic light-emitting device performance than the observed valence band shift, which is thought to lower the electron injection barrier.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2009년도 춘계학술대회 논문집
• /
• pp.110-110
• /
• 2009

최근 차세대 비휘발성 메모리(NVM) 기술은 메모리의 성능과 기존의 한계점을 효과적으로 극복하며 활발한 연구를 통해 비약적으로 발전하고 있으며 특히, phase-change random access memory (PRAM)은 ferroelectric random access memory (FeRAM)과 magneto-resistive random access memory (MRAM)과 같은 다른 NVM 소자와 비교하여 기존의 DRAM과 구조적으로 비슷하고 상용화가 빠르게 진행될 수 있을 것으로 예상되는 바, PRAM에 사용되는 상변화 물질의 식각을 수행하고 X-ray photoelectron spectroscopy (XPS)를 통해 표면의 열화현상을 관찰하였다.

• 한국전기전자재료학회논문지
• /
• 제13권7호
• /
• pp.563-567
• /
• 2000

We presented the etch results of indium-tin oxide thin films by using SF$_{6}$/O$_2$gas electron cyclotron resonance plasma and conducted X-ray phtoelectron spectroscopy and quadrupole mass spectrometer analyses for the etch characteristics. The etch rate of the films was greatly dependent on that of oxygen which was the major constituent element of the films. The oxygen was removed by the forms like $O_2$or SOF$_2$. We examined the ratio of atomic content of O and In and the change of this ratio was related to the removal rate of InF$_{x}$ and the S-metal bonding.ing.