• Journal of the korean academy of Pediatric Dentistry
• /
• v.48 no.4
• /
• pp.397-404
• /
• 2021

The purpose of this study was to evaluate the effect of a hemostatic agent containing aluminum chloride on the shear bond strength of resin-modified glass ionomer cement (RMGIC) to the dentin of primary teeth. Thirty-six extracted non-carious human primary teeth were collected in this study. Dentin surfaces were cut and polished. The specimens were randomly divided into 4 groups; group I: RMGIC without conditioning; group II: polyacrylic acid (PAA), RMGIC; group III: aluminum chloride, RMGIC; group IV: aluminum chloride, PAA, RMGIC. All teeth were thermocycled between 5.0℃ and 55.0℃ for 5000 cycles. Fifteen specimens from each group were subjected to shear bond strength test and 3 specimens from each group were inspected using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy. The mean shear bond strength of each group was as follows: 4.04 ± 0.88 MPa in group I, 8.29 ± 1.40 MPa in group II, 1.39 ± 0.47 MPa in group III, 6.24 ± 2.76 MPa in group IV. There were significant differences among all groups (p < 0.001). SEM image of the dentinal tubules were partially exposed in group III and group IV. Fully exposed dentinal tubules were found in group II. In conclusion, aluminum chloride decreased the shear bond strength of RMGIC to dentin, regardless of PAA conditioning.

• The Journal of Korean Society for Radiation Therapy
• /
• v.33
• /
• pp.117-125
• /
• 2021

Purpose: To purpose of this study is to find the correlation of the Set-up error according to the couch rotation and suggest additional margin setting for the GTV. Target and Method: Each scenario treatment plan was created by making the frequency of non-coplanar beams different among all beams. The set-up error value was measured by using the Exact System and the dose accuracy was evaluated by creating a re-treatment plan. Results: When the couch was rotated by 30°, 45°, 60°, and 90°, the mean of the X-axis values was measured to be 0.29 mm, 0.26 mm, 0.51 mm, and 0.08 mm, respectively. The mean of the Y-axis values was measured to be 0.75 mm, 0.5mm, 0.35 mm, and 0.29 mm, respectively. The mean of the Z-axis values was measured to be 0.5 mm, 0.28 mm, 0.22 mm, and 0.1 mm, respectively. There were dose reductions of 0.1%, 3.1%, 1.9% in D99 for 1-NC VMAT, 2-NC VMAT, and 3-NC VMAT, respectively. Conclusion: When treating with 50% or more of non-coplanar beams among total beams, image verification is required. And it is considered to make the treatment plan by adding a 1.5 mm margin to the GTV.

• Atmosphere
• /
• v.31 no.5
• /
• pp.593-606
• /
• 2021

The Korea Meteorological Administration/National Institute of Meteorological Sciences (KMA/NIMS) has monitored atmospheric CO₂ at Anmyeondo (AMY) World Meteorological Organization (WMO) Global Atmosphere Watch Programme (GAW) regional station since 1999, and expanded its observations at Jeju Gosan Suwolbong station (JGS) in the South and at Ulleungdo-Dokdo stations in the East (ULD and DOK) since 2012. Due to a recent WMO CO₂ scale update and a new filter (NIMS) to select baseline levels at each station, the 22 years of CO₂ data are recalculated. After correction for the new CO₂ scale, we confirmed that those corrected records are reasonable within the compatibility goal (±0.1 ppm of CO₂) between KMA/NIMS and National Oceanic and Atmosphereic Administration (NOAA) flask-air measurements with the new scale. With the new NIMS filter, CO₂ baseline levels are now more representative of the large-scale background compared to previous values, which contained large CO₂ enhancements. Atmospheric CO₂ observed in South Korea is 4 to 8 ppm greater than the global average while the amplitude of seasonal variation is similar (10~13 ppm) to the amplitude averaged over a comparable latitude zone (30°N-60°N). Variations in CO₂ growth rate are also similar, increasing and decreasing similar to global values, as it reflects the net balance between terrestrial respiration and photosynthesis. In 2020, atmospheric CO₂ continued increasing despite the COVID-19 pandemic. Even though fossil emission was reduced (around -7% globally), we still emitted large amounts of anthropogenic CO₂. Overall, since CO₂ has large natural variations and its source was derived from not only fossil fuel but also biomass burning, the small fossil emission reduction could not affect the atmospheric level directly.

• Animal Bioscience
• /
• v.35 no.5
• /
• pp.763-777
• /
• 2022

Objective: Excessive lipid accumulation in adipocytes results in prevalence of obesity and metabolic syndrome. Curcumin (CUR), a naturally phenolic active ingredient, has been shown to have lipid-lowering effects. However, its underlying mechanisms have remained largely unknown. Therefore, the study aims to determine the effect of CUR on cellular lipid accumulation in porcine subcutaneous preadipocytes (PSPA) and to clarify novel mechanisms. Methods: The PSPA were cultured and treated with or without CUR. Both cell counting Kit-8 and lactate dehydrogenase release assays were used to examine cytotoxicity. Intracellular lipid contents were measured by oil-red-o staining extraction and triglyceride quantification. Apoptosis was determined by flow cytometry and the terminal deoxynucleotidyl transferase-mediated deoxyuridine triphosphate-nick end labelling assay. Adipogenic and apoptosis genes were analyzed by quantitative polymerase chain reaction and Western blot. Results: The CUR dose-dependently reduced the proliferation and lipid accumulation of PSPA. Noncytotoxic doses of CUR (10 to 20 μM) significantly inhibited extracellular signal-regulated kinase 1/2 (ERK1/2) phosphorylation and expression of adipogenic genes peroxisome proliferation-activity receptor-γ (PPAR-γ), CCAAT/enhancer binding protein-α, sterol regulatory element-binding protein-1c, adipocyte protein-2, glucose transporter-4 as well as key lipogenic enzymes fatty acid synthase and acetyl-CoA carboxylase, while ERK1/2 activation significantly reversed CUR-reduced lipid accumulation by increasing PPAR-γ. Furthermore, compared with differentiation induced media treated cells, higher dose of CUR (30 μM) significantly decreased the expression of AKT and B-cell lymphoma-2 (BCL-2), while increased the expression of BCL-2-associated X (BAX) and the BAX/BCL-2 expression ratio, suggesting triggered apoptosis by inactivating AKT and increasing BAX/BCL-2 ratio and Caspase-3 expression. Moreover, AKT activation significantly rescued CUR inhibiting lipid accumulation via repressing apoptosis. Conclusion: These results demonstrate that CUR is capable of suppressing differentiation by inhibiting ERK1/2-PPAR-γ signaling pathway and triggering apoptosis via decreasing AKT and subsequently increasing BAX/BCL-2 ratio and Caspase-3, suggesting that CUR provides an important method for the reduction of porcine body fat, as well as the prevention and treatment of human obesity.

• The Korea Journal of Herbology
• /
• v.32 no.3
• /
• pp.45-53
• /
• 2017

Objective : Nelumbo nucifera, its rhizome and semen have been used as a traditional medicine which was studied on antioxidant, hepatoprotective effect, anti-obesity and the others. However, Nelumbinis Flos have not studied. We investigated protective effects on oxidative DNA damage and anti-inflammatory effects of Nelumbinis Flos. Methods : The antioxidant activity was conducted by 1,1-diphenyl-2-picryl hydrazyl (DPPH) radical, 2, 2'-Azino-bis (3-ethylbenzothiazoline-6 sulfonic acid) diammonium salt (ABTS) radical scavenging assay and reducing power assay. Total phenolic content was analyzed. Also, phenolic compounds were detected by HPLC/UV. The inhibitory effect on oxidative DNA damage was determined using ${\Phi}X-174$ RF I plasmid DNA cleavage assay. The anti-inflammatory effect of Nelumbinis Flos was measured by the amount of nitric-oxide (NO) produced and protein levels of iNOS, and COX-2 in LPS induced RAW 264.7 cells. Results : The results of DPPH and ABTS radical scavenging activity at $200{\mu}g/m{\ell}$ of extraction were $97.02{\pm}0.88%$ and $96.42{\pm}0.25%$. Reducing power (fold of L-ascorbic acid as control) was $100.14{\pm}0.31$ at $200{\mu}g/m{\ell}$. Total phenol content was $8.70{\pm}0.02mg/g$. Chlorogenic acid, catechin and epicatechin were found by HPLC. Nelumbinis Flos has inhibitory effect in dose-manner against oxidative DNA damage. In addition, it showed the anti-inflammatory effect by suppression of NO production as well as protein levels of iNOS, and COX-2. Conclusion : This study suggested that Nelumbinis Flos showed potential antioxidant and suppression activities of various factors were related in NO produced. Therefore, Nelumbinis Flos as natural plant resources that may help reduce inflammation and alleviate DNA damage.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.32 no.1
• /
• pp.24-33
• /
• 1987

Competitive ability and response of grain yield in a mixed cropping of two cultivars having different agronomic traits were evaluated at the Yeongnam Crop Experiment Station in 1984 and 1985. Competitive ability was higher in Indica x Japonica cultivar, Milyang 23, and tall statured cultivar, Samgang-byeo, than in Japonica type cultivar, Nacdongbyeo, short statured type cultivar, Taebaegbyeo, respectively. Compared to pure stand, more grain yield was recorded when mixture rates were over 50% in a seed volume for the mixing rate of high yielding cultivar in two cultivars, but low compared to pure cultivation of the cul-tivar having the higher yielding ability in two cultivars.

• Journal of radiological science and technology
• /
• v.46 no.1
• /
• pp.1-8
• /
• 2023

As the demand for bone mineral density testing increases in Korea, which is close to an aging society, it is necessary to evaluate the repeatability of equipment such as femur phantom other than l-spine for more accurate diagnosis. However, in clinical practice, it is often not possible to proceed such evaluation due to insufficient quality control conditions. Therefore, this study is to evaluate the usefulness of the femur phantom after fabricating the same using 3D printing technology. The femur phantom was output using GlowFill filament and FDM 3D printing type. Each phantom was repeatedly scaned 20 times to compare whether the existing l-spine phantom and the fabricated femur phantom were suitable as a phantom for quality control. Each time the seven researchers took three times, the location of the femur phantom was readjusted, and then scanned to confirm the error between the researchers. As a result of conducting repeatability evaluation using femur phantom, the coefficient of variation rate was 2%, which was within the minimum precision tolerance of 2.5%. The reproducibility between the researcher was also found to be suitable as the average coefficient of variation was 0.031 and the coefficient of variation rate was 3.1%, which was within the minimum precision error range of 5%. In conclusion, it is considered that the prospective attitude and usefulness of the femur phantom fabricated by 3D printing in clinical practice will be sufficient.

• Korean Journal of Forensic Psychology
• /
• v.11 no.3
• /
• pp.349-370
• /
• 2020

This study was to test the effects of unanticipated questions on the number of general and verifiable details. In addition, the number of verifiable details would discriminate truth-tellers and liars more accurately than the number of general details. In a 2(Veracity: truth vs. lie) X 2(Question type: Expected questions vs. Unexpected questions) mixed-design study, truth tellers(N=40) were asked to visit a cafe on campus and liars(N=40) were told to fabricated a story as if they visited the cafe. Then, participants were interviewed about their trip to the cafe and asked four questions(two anticipated questions: 'report the trip in detail', 'describe the place'; two unanticipated questions: 'recall in reverse order', 'report verifiable details'). Each participant's statements were transcribed and coded by trained graduate students for the number of general details and verifiable details. The results showed that truth-tellers mentioned significantly more general details than liars regardless of the question type. On the contrary, there was no significant difference between liars and truth-tellers in the number of verifiable details. High percentages of truth-tellers(62.5%) and liars(80.0%) were classified correctly based on the number of general details whereas only 45.0% of truth tellers and 62.5% of liars were accurately classified by the number of verifiable details. Liars were found to speak more words when asked to provide verifiable details compared to a general open question, but the number of general details did not seem to increase accordingly. The limitations of this study and future research directions were discussed.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.11
• /
• pp.221-232
• /
• 2009

To purpose of the study was to analyze faculty utility of Web-Based course support system in Universities. Data were collected from log file in server computer, 5,023 faculties and 12,733 courses offered at spring semester of 2009 in the Metropolitan area S, K, D universities were analyzed. Specifically, frequency and percentile of faculties and courses using course management system were analyzed. In addition, the frequencies and percentiles of courses using sub-functions of course management system were analyzed and X2 test used to examine the difference of frequencies of faculties and courses using course system at using announcement, providing instructional material, public bulletin board and free board. Results were as follows. The 62.28% of faculties and 50.3% of courses have used Web-Based course support system. The results of Subfunction utility analysis showed the highest use as 80.4%. in providing instructional material. However, the use of announcement functions and online discussion was more or less low. Results imply that most of faculties and course are using course management system as supplementary system of off-line instruction.

• Journal of Korean Port Research
• /
• v.5 no.2
• /
• pp.19-37
• /
• 1991

This work aims to : establish a model of the container physical distribution system of Pusan port comprising 4 sub-systems of a navigational system, on-dock cargo handling/transfer/storage system, off-dock CY system and an in-land transport system : examine the system regarding the cargo handling capability of the port and analyse the cost of the physical distribution system. The overall findings are as follows : Firstly in the navigational system, average tonnage of the ships visiting the Busan container terminal was 33,055 GRT in 1990. The distribution of the arrival intervals of the ships' arriving at BCTOC was exponential distribution of $Y=e^{-x/5.52}$ with 95% confidence, whereas that of the ships service time was Erlangian distribution(K=4) with 95% confidence, Ships' arrival and service pattern at the terminal, therefore, was Poisson Input Erlangian Service, and ships' average waiting times was 28.55 hours In this case 8berths were required for the arriving ships to wait less than one hour. Secondly an annual container through put that can be handled by the 9cranes at the terminal was found to be 683,000 TEU in case ships waiting time is one hour and 806,000 TEU in case ships waiting is 2 hours in-port transfer capability was 913,000 TEU when berth occupancy rate(9) was 0.5. This means that there was heavy congestion in the port when considering the fact that a total amount of 1,300,000 TEU was handled in the terminal in 1990. Thirdly when the cost of port congestion was not considered optimum cargo volume to be handled by a ship at a time was 235.7 VAN. When the ships' waiting time was set at 1 hour, optimum annual cargo handling capacity at the terminal was calculated to be 386,070 VAN(609,990 TEU), whereas when the ships' waiting time was set at 2 hours, it was calculated to be 467,738 VAN(739,027 TEU). Fourthly, when the cost of port congestion was considered optimum cargo volume to be handled by a ship at a time was 314.5 VAN. When the ships' waiting time was set at I hour optimum annual cargo handling capacity at the terminal was calculated to be 388.416(613.697 TEU), whereas when the ships' waiting time was set 2 hours, it was calculated to be 462,381 VAN(730,562 TEU).