• Korean Journal of Soil Science and Fertilizer
• /
• v.32 no.3
• /
• pp.215-222
• /
• 1999

Platycodon root contains abundant pharmaceutical substances and is widely used as a food and a medicinal herb. This study was conducted to determine the cultural environment and soil morphological characteristics of platycodon. Sampling sites were Keochang 4, Kimhae 7, Haman 6, Chinju 6 and Koseong 3 fields in Kyongnam province and Hongcheong 6 fields in Kangwon province. The average continious cropping year was highest Chinju 8.0-years old, whereas lowest Hongcheon 2.3-years old. The average cropping area and compost application were highest Hongcheon 1.3ha and $108Mg\;ha^{-1}$ respectively than other areas. The slope was in order to Koseong steep slope with 35%. Koechang 28%, Flaman 16%, Chinju 11.7%, Kimhae 11% and Hongcheon 7.5%. The drainage classes was well drained in Koechang. Kimhae, Chinju and Koseong, while it s poorly drained in Hongcheon and Haman. Distribution of topography was highest rolling 37.9% and drainage classes was highest well drained 48.3%. The root disease incidence rate was in the order of Haman 56.8%, Hongcheon 52.5%, Kimhae 36.7%, Koechang 35.3%, Chinju 32.3% and Koseong 30.0%. The yield at the Chinju $36.17Mg\;ha^{-1}$ was higher than that of Koseong $25.00Mg\;ha^{-1}$, Kimhae $13.57Mg\;ha^{-1}$, Koechang $11.75Mg\;ha^{-1}$, Haman $9.50Mg\;ha^{-1}$ and Hongcheon $5.24Mg\;ha^{-1}$. The average temperature was correlated with the disease incidence rate by $Y=3.07X^2-87.16X+649.26(R^2=0.947^{**})$ and yield by $Y=-478.68X^2+13403X-90836(R^2=0.763^*)$. The root disease incidence rate was correlated with drainage classes Y=19.1X-5.26($R^2=0.592{***}$), topography Y=9.68X+10.77($R^2=0.205^{**}$) and slope Y=0.85X+-27.88 ($R^2=0.143^*$). The yield was correlated with drainage classes Y=-10X+42($R^2=0.348^{**}$), topography Y=-5.34X+34.5 ($R^2=0.134^*$) and slope Y=-0.68X+25.48($R^2=0.129^*$). The optimum cultivated land of perennial platycodon was average temperature $14^{\circ}C$, direction of southeast, topography of flat or undulating, slope of 0-6%, well drained.

• Journal of the Korean Wood Science and Technology
• /
• v.8 no.1
• /
• pp.22-27
• /
• 1980

Quantitative assessment of edge blunting of saw-teeth was carried out by TALYSURF. 1. Using the following equation, the real shape of a saw-tooth can be traced on the graph of TALYSURF. ${\frac{{\Delta}h}{h}}={\frac{V{\Delta}_x}{V_x}}$ {${\Delta}h$: vertical distance of stylus h: vertical distance in chart $V{\Delta}_x$: Velocity of stylus $V_x$: velocity of chart} 2. As shown on Fig 2, the error from stylus itself can be calculated by following equation. i) 13.8${\mu}{\leqq}$x<20.4${\mu}$ y=-0.2246x+4.59${\mu}$ ii) 0${\leqq}$x<13.8${\mu}$ y=${\sqrt{(-18{\mu})^2-x^2}}-1.42x+32.7{\mu}}$ 3. The relationship between profile of saw-tooth and error from stylus itself can be calculated by following equation. $E(%)=\frac{f(r){\times}{\frac{4}{18{\mu}}}}{f(R){\times}{\frac{R}{18.5{\mu}}}-f(r){\times}{\frac{r}{18{\mu}}}}{\times}100$ {E(%)${\frac{error\;of\;stylus}{dullness\;of\;saw\;tooth}}{\times}100$ r: radius of stylus tip R: radius of tip which is drawn in graph of talysurf f(r) : error of stylus f(R) : dullness of tip which is drawn in graph of talysurf} 4. The graph of maximum error and profile of saw-tooth was parabola.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.35-35
• /
• 2002

• The Journal of Natural Sciences
• /
• v.14 no.1
• /
• pp.25-37
• /
• 2004

T7 RNA polymerase also recognize intrinsic, hairpin-independent termination signal, a conserved 7-base pair sequence (ATCTGTT in the non-template stand) and U-rich sequence downstream of it. These intrinsic, hairpin-independent termination signal were commonly found in PTH and CJ termination sequences. There are two types of mutant T7 RNA polymerases recognizing sensitively(X3, X19, BG8) of insensitively (R173C) the intrinsic termination signals. We determined the T7 transcription activities of these mutants. Compared to wild-type, mutants X4, 19 and BG8 show highly reduced transcription activities (8%, 33%, 34%). On the other hand mutant R173C shows comparable transcription activity of wild-type (112%). Also transcription termination efficiencies at the PTH or CJ termination signals were determined by using mutant RNA polymerases. Temination of mutnats X4, X19 and BG8 are increased compared to wild-type. On the other hadn mutant R173C proceeds through PTH and CJ termination signals.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.555-558
• /
• 2000

Layered perovskite La$_{2-x}$Ca$_{l-x}$Mn$_2$O$_{7}$ phases were synthesized by solid state reaction. Single phase R-P could be obtained in the range of 0.4$_{2-x}$Ca$_{l-x}$Mn$_2$O$_{7}$. About 30% of MR ratio was obtained at 270K when 5 T of magnetic field was applied.ied.ied.ied.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.12
• /
• pp.1080-1086
• /
• 2003

Effects of E$_2$O$_3$. HO$_2$O$_3$ and Dy$_2$O$_3$ addition on dielectric properties of non-reducible BaTiO$_3$ based X7R dielectrics with Ni electrode have been studied in a reduced atmosphere. As the content of rare-earth with E$_2$O$_3$. HO$_2$O$_3$, Dy$_2$O$_3$ was less than 3wt%, The TCC(Temperature Capacitance Change) and insulation resistance characteristics were improved by compensate the oxygen vacancies due to occupy either the Ba or Ti site. We developed the composition of X7R (EIA standard) for higher capacitance MLCC which had high reliability electric properties by the addition of Er ion into BaTiO$_3$ + MgO + Y2O$_3$ + MnO + (Ba$\sub$0.4/Ca$\sub$0.6/)SiO$_3$ composition.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.425-430
• /
• 2019

This work describes the design and characterization of a X-band power amplifier (PA) monolithic microwave integrated circuit (MMIC) using a $0.25{\mu}m$ gate length gallium nitride (GaN) high electron mobility transistor (HEMT) technology. The developed X-band power amplifier MMIC has small signal gain of over 22.7 dB and saturated output power of 43.02 dBm (20.04 W) over the entire band of 9 to 10 GHz. Maximum saturated output power is a 43.84 dBm (24.21 W) at 9.5 GHz. Its power added efficiency (PAE) is 41.0~51.24% and the chip dimensions are $3.7mm{\times}2.3mm$, generating the output power density of $2.84W/mm^2$. The developed GaN power amplifier MMIC is expected to be applied in a variety of X-band radar applications.

• Korean journal of applied entomology
• /
• v.45 no.3 s.144
• /
• pp.333-337
• /
• 2006

The damage aspects of soybean by common cutworm, Spodoptera litura (Fabricius) (Lepidoptera: Noctuidae) at different larval density and different growth stage of soybean were studied in soybean field. The percent yield reduction(Y) of soybean infested by different densities of S. litura (X, no. of larvae/plant) under outdoor conditions for a three week period were estimated by the following equations: (1) Y = 1.655X - 6.025 ($R^{2}=0.952$) for the R1 (flowering stage); (2) Y = 0.725X - 0.475 ($R^{2}=0.986$) for the R3 (beginning pod stage); and (3) Y = 0.635X - 1.325 ($R^{2}=0.986$) for the R5 (beginning seed stage). Based on the relationships between the densities of S. litura larvae and the yield index of soybean, the number of larvae (2nd-3rd instar) which caused 5% loss of yield (Tolerable injury level) was estimated to as approximately 6.7 for the R1, 7.5 for the R5, and 10.0 per plant for the R5, respectively. Average soybean leaf areas consumed by 1st, 2nd, 3rd, 4th, 5th and 6th larvae of Spodoptera litura during 24 hr at $28^{\circ}C$ was 0.3, 0.7, 2.6, 4.0, 20.1, and $55.8\;cm^{2}$, respectively.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.1
• /
• pp.24-31
• /
• 2000

This study was conducted to determine the effect of soil physical characteristics on rhizome rot incidence of platycodon. Sampling sites were Keochang 4, Kimhae 7, Haman 6, Chinju 6 and Koseong 3 fields in Kyongnam province and Hongcheon 6 fields in Kangwon province. The root disease incidence rate was correlated with soil depth Y=-0.747X+88.19($R^2=0.394^{***}$), soil hardness Y=4.36X+8.93($R^2=0.201^*$), bulk density Y=104.7X-80.99($R^2=0.295^{**}$), clay content Y=1.24X+14.14($R^2=0.196^*$), porosity Y=-3.11X+215.9($R^2=0.220^*$) and silt content Y=-0.75X+67.85($R^2=0.178^*$). The yield was correlated with soil depth Y=0.263X+0.971($R^2=0.105^*$), clay content Y=-0.688X+32.74($R^2=0.158^*$), porosity Y=1.974X-93.19($R^2=0.231^{**}$) and silt content Y=53.05X-108.65($R^2=0.232^*$), The optimum cultivated land of perennial platycodon was soil depth over 1m, soil hardness under $5kg\;cm^{-2}$, bulk density $1.0Mg\;m^{-3}$, moisture content 13~17%. clay content 5~10%, porosity 58~63%, silt content 38~64% and soil texture of silt loam.

• Journal of Applied and Pure Mathematics
• /
• v.4 no.1_2
• /
• pp.1-7
• /
• 2022

A mapping T : R → R (not necessarily additive) is called multiplicative left 𝛼-centralizer if T(xy) = T(x)𝛼(y) for all x, y ∈ R. A mapping F : R → R (not necessarily additive) is called multiplicative (generalized)(𝛼, 𝛽)-derivation if there exists a map (neither necessarily additive nor derivation) f : R → R such that F(xy) = F(x)𝛼(y) + 𝛽(x)f(y) for all x, y ∈ R, where 𝛼 and 𝛽 are automorphisms on R. The main purpose of this paper is to study some algebraic identities with multiplicative (generalized) (𝛼, 𝛽)-derivations and multiplicative left 𝛼-centralizer on the left ideal of a prime ring R.