• 한국전기전자재료학회논문지
• /
• 제24권2호
• /
• pp.162-165
• /
• 2011

In this paper, $CuInSe_2$ thin film was prepared by use of the co-evaporation method with the variation of the substrate temperature in the range of $100^{\circ}C$ to $400^{\circ}C$. The film was annealed at $300^{\circ}C$ for an hour in a vacuum chamber at $3{\times}10-4$ Pa. After annealing, the thin film prepared at the substrate temperatures of $100^{\circ}C$ and $200^{\circ}C$ was observed. The XRD (x-ray diffraction) pattern of sample prepared at $100^{\circ}C$ showed the single phase formation of $CuInSe_2$. However, at $200^{\circ}C$, there was no apparent difference in the XRD pattern except a variation in the intensity of the peak. As the annealing treatment of substrate improved the crystal structure of the film, it affected to the increase of an electron mobility, resulted in an increase in conductivity and a decrease in resistance. As a results, when the substrate temperature was at $200^{\circ}C$ and $300^{\circ}C$, the sheet resistance was 1.534 $\Omega/\Box$ and 1.554 $\Omega/\Box$, respectively, and the resistivity was $1.76{\times}10-6\;{\Omega}{\cdot}cm$ and $1.7210-6\;{\Omega}{\cdot}cm$, respectively. From the absorption spectrum measurements, there was no variation between the before and after annealing conductions. And it means that the annealing step does not affect the thickness of the thin film.

• Archives of Plastic Surgery
• /
• 제32권4호
• /
• pp.485-490
• /
• 2005

Fingertip is the end of tactile organ and the part of hand most frequently injured. Fingertip injuries should be evaluated on an individual basis considering patient's overall physical condition, medical history, etiology, time of injury, and anticipated future hand use, and accordingly one of various methods of reconstruction should be selected. Complications after the reconstruction of fingertip injuries have been reported as pain, hypersensitivity, numbness, distal paresthesia, cold intolerance, and atrophy. From January to December 2002, dermofat grafts were performed on 15 patients to correct painful fingertips after injury. The thickness of the soft tissue of fingertip was measured both preoperatively and postoperatively with simple X-ray. To evaluate the improvement of pain, visual analogue scale(VAS) was used through the direct interview with patients. The average of postoperative follow-up period was 10.9 months. The average of increased soft tissue thickness ratio was 88.4%(2.3mm to 3.8mm). The average of preoperative VAS was 7.6, and postoperative VAS was 3. Dermofat graft on fingertip needs a further long-term follow-up study for the absorption ratio of dermofat, however, this procedure is simple and could be done under local anesthesia, and would be a useful alternative procedure to correct painful fingertips with the soft tissue atrophy after injury.

• 한국의류학회지
• /
• 제41권1호
• /
• pp.131-140
• /
• 2017

Uniform nanofibers of polyurethane with different content of Juniperus Chinensis extracts (JCE) were successfully prepared by the electrospinning method. We investigated physiochemical properties of prepared compound nanoweb according to various concentrations of Juniperus Chinensis extracts using a Fourier transform infrared (FT-IR) spectrometer, X-ray diffractometer (XRD), thermogravimeter (TGA), and differential scanning calorimeter (DSC). The antibacterial activity of the JCE loaded PU nanofiber was conducted using the disk diffusion test against Gram-positive and Gram-negative bacteria. JCE was induced in the infrared spectra in the absorption band of PU/JCE nanowebs at $3,300cm^{-1}$, $2,960cm^{-1}$, $1,400-1,600cm^{-1}$, and $1,050cm^{-1}$. Thermal stability decreased with increasing JCE content in the PU/JCE nanowebs. The DSC curve of the PU nanoweb shows an endotherm peak at $420^{\circ}C$; in addition, the peak also became smaller and broader with increasing JCE content. The diffraction intensities of PU observed at 2 theta of $20^{\circ}$ decreased with the increasing amount of JCE in the compound nanoweb. In addition, the crystal intensities of the compound nanowebs also decreased along with the JCE content. Structural analysis indicates that JCE and PU are miscible. Juniperus Chinensis incorporated PU nanofibers demonstrated excellent antibacterial properties against both Gram-positive and Gram-negative bacteria.

• 자원환경지질
• /
• 제53권2호
• /
• pp.183-196
• /
• 2020

본 연구는 마이크로웨이브-질산용출과 자력/수력선별을 이용하여 정광으로부터 자연 금을 회수하는 것을 목표로 하였다. 마이크로웨이브-질산용출실험을 통해 용출용액으로부터 불용성-잔류물을 여과하였다. 용출용액을 원자흡수분광기(AAS)로 분석한 결과 Au는 전혀 용출되지 않은 것을 그리고 불용성-잔류물을 후방산란전자영상(BSE)으로 관찰한 결과 자연 금이 단체분리된 것으로 확인되었다. 불용성-잔류물을 자력/수력선별 하여 자성광물과 비-자성광물로 선별하였다. 자성광물에서 자철석이 회수되었고, 비-자성광물을 다시 수력선별한 결과 자연 금이 회수되었다. 자연 금은 X선 회절 분석(XRD)과 BSE 영상에서 확인되었다.

• 한국분말재료학회지
• /
• 제15권1호
• /
• pp.13-17
• /
• 2008

Visible-light responsive $TiO_2$:Zr, N powders were prepared by polymer complex solution method and the particle properties were characterized by using transmission electron microscope, BET method, X-ray diffractometer and UV-Vis spectrophotometer. The photocatalytic reactivity of the catalysts was also estimated by analyzing NO degradation. Polyhedral $TiO_2$ powder having about 20 um in the average particle diameter was successfully prepared, The XRD analysis revealed that the as-prepared powder consisted of anatase and rutile phases. The light absorption of the as-prepared $TiO_2$:Zr, N powder was shifted to the visible light. In addition, the as-prepared $TiO_2$:Zr, N nanoparticles showed the higher photocatalytic activity than the commercial $TiO_2$ under both UV and visible lights.

• 한국분말재료학회지
• /
• 제15권3호
• /
• pp.221-226
• /
• 2008

Silver coated copper composite powders were prepared by electroless plating method by controlling the activation and deposition process variables such as feeding rate of silver ions solution, concentration of reductant and molar ratio of activation solution $(NH_4OH/(NH_4)_2SO_4)$ at room temperature. The characteristics of the product were verified by using a scanning electron microscopy (SEM), X-ray diffraction (XRD) and atomic absorption (A.A.). It is noted that completely cleansing the copper oxide layers and protecting the copper particles surface from hydrolysis were important to obtain high quality Ag-Cu composite powders. The optimum conditions of Ag-Cu composite powder synthesis were $NH_4OH/(NH_4)_2SO_4$ molar ratio 4, concentration of reductant 15g/l and feeding rate of silver ions solution 2 ml/min.

• 한국안광학회지
• /
• 제4권2호
• /
• pp.97-103
• /
• 1999

ZnS 화합물은 근자외선 영역의 직접천이형 띠 간격을 갖으며 청색 발광 다이오드나 레이저의 소재로 기대되는 물질이다. 결정구조는 X선 회절무늬를 분석한 결과 zinc blonde구조임을 알 수 있었다. 격자상수는 $a_o=5.411{\AA}$이었다. ZnS단결정의 광학적 흡수, 광전류와 광발광 스펙트럼 등 광학적 특성을 조사하였다. 광학적 띠간격 에너지는 3.61eV이었고 $800^{\circ}C$에서 열처리한 ZnS의 띠 간격 에너지는 광전류 측정 결과 as-grown-ZnS에 비하여 0.1eV 정도 작아짐을 알 수 었었다. 광발광 스펙트럼은 30K에서 293K까지 as-grown-ZnS와 $800^{\circ}C$에서 열처리한 경우에 대하여 각각 측정되었다. As-grown ZnS단결정의 광발광 피크는 350nm, 392nm, 465nm에서 $800^{\circ}C$에서 열처리한 경우 349nm, 370nm, 394nm 518nm, 572nm에서 각각 측정되었다.

• 한국재료학회지
• /
• 제15권2호
• /
• pp.97-105
• /
• 2005

[ $11\AA$ ] tobermorite$(5CaO{\cdot}6SiO_2{\cdot}5H_2O)$ is synthesized from the mixtures of calcium hydroride and quartz using alumina in a molar ratio $Ca(OH)_2/SiO_2$ of 0.8 at $180^{\circ}C$ for 8 and 24 hrs under saturated steam pressure. The influence of alumina on the formation of $11\AA$ tobermorite was investigated by X-ray diffraction, differential thermal analysis and infrared spectroscopy. $11\AA$ tobermorite containing increasingly larger amounts of aluminum showed a shift of the basal spacing from 11.3 to $11.6\AA$. In general, there was a direct linear relation between the basal spacing and added content of alumina. The differential thermal analysis curves showed that $11\AA$ tobermorite with increasing alumina contents exhibited the exothermic peak at high temperature, namely $11\AA$ tobermorite containing aluminum gave a sharp exothermic peak at temperature around $850\~860^{\circ}C$ in the case of $S_3\~S_5$. The absorption band at $1607\~1620cm^{-1}$ is attributed to the bending vibration of water, and the position of the main O-H stretching and Si-O lattice vibration of $11\AA$ tobermorite at 3500 and $965cm^{-1}$ respectively is not altered. Consequently the existence of alumina accelerates the crystallization of $11\AA$ tobermorite, and that the aluminum ion appears to substitute for the silicon ion in $11\AA$ tobermorite structure. Al-containing tobermorite is distinguished from Al-free tobermorite.

• Bulletin of the Korean Chemical Society
• /
• 제26권9호
• /
• pp.1390-1394
• /
• 2005

Dimeric metallamacrocycles of 2 : 2 (metal-to-ligand) stoichiometry, [Pd{${\alpha},{\omega}$-bis(diphenylphosphino)oligothienylene}$Cl_2]_2$ 1-3 were prepared from a self-assembly reaction of $[Pd(CH_3CN)_2Cl_2]$ and ${\alpha},{\omega}$-bis-(diphenylphosphino)oligothienylene in 90-94% yields. The structures of metallamacrocycles 1-3 were determined by X-ray diffraction. 1 crystallizes in the monoclinic space group $P2_1$/n with a/$\AA$ = 12.0737(13), b/$\AA$ = 17.1993(18), c/$\AA$ = 13.0951(14) and ${\beta}/^{\circ}$ = 101.505(2). 2 crystallizes in the triclinic space group P with a/$\AA$ = 10.2634(4), b/$\AA$ = 19.7855(9), c/$\AA$ = 21.0851(9), ${\alpha}/^{\circ}$ = 63.1010(10), ${\beta}/^{\circ}$ = 86.5880(10), ${\gamma}/^{\circ}$ = 81.2280(10). 3 crystallizes in the triclinic space group P with a/$\AA$ = 10.4353(19), b/$\AA$ = 13.482(3), c/$\AA$ = 13.816(3), ${\alpha}/^{\circ}$ = 108.027(4), ${\beta}/^{\circ}$ = 90.461(4), ${\gamma}/^{\circ}$ = 93.261(4). The UV spectra of 1-3 were characterized.

• Bulletin of the Korean Chemical Society
• /
• 제26권9호
• /
• pp.1395-1402
• /
• 2005

The reaction of cis-[Cr([14]-decane)$(OH)_2]^+$ ([14]-decane = rac-5,5,7,12,12,14-hexamethyl-1,4,8,11-teraazacyclotetradecane) with auxiliary ligands {$L_a$ = acetylacetonate (acac), oxalate (ox) or malonate (mal)} leads to a new cis-[Cr([14]-decane)(acac)]$(ClO_4)_2{\cdot}(1/2)H_2O\;(1),\;cis-[Cr([14]-decane)(ox)]ClO_4{\cdot}(1/2)H_2O\;(2)\;or\;cis-[Cr([14]-decane)(mal)]ClO_4{\cdot}(1/4)H_2O\;(3)$. These complexes have been characterized by a combination of elemental analysis, conductivity, IR and Vis spectroscopy, mass spectrometry, and X-ray crystallography. Analysis of the crystal structure of cis-[Cr([14]-decane)(acac)]$(ClO_4)_2{\cdot}(1/2)H_2O$ reveals that central chromium(III) has a distorted octahedral coordination environment and two acetylacetonate-oxygen atoms are bonded to the chromium(III) ion in the cis positions. The angle $N_{axial}-Cr-N_{axial}$ deviates by $11^{\circ}$ from the ideal value of $180^{\circ}$ for a perfect octahedron. The bond angle O-Cr-O between the chromium(III) ion and the two acetylacetonate-oxygen atoms is close to $90^{\circ}$. The bond lengths of Cr-O between the chromium and the acetylacetonate-oxygen atoms are 1.950(3) and 1.954(2) $\AA$. They are shorter than those between chromium and nitrogen atoms of the macrocycle. The IR spectra of 1, 2 and 3 display bands at 1560 {ν (C=O)}, 1710 {${\nu}_{as}$(OCO)} and 1660 $cm^{-1}$ {${\nu}_{as}$(OCO)} attributed to the acac, ox and mal auxiliary ligands stretching vibrations, respectively.