• 대한수학회보
• /
• 제26권2호
• /
• pp.119-126
• /
• 1989

Throughout this paper, X will always denote a Banach space over the complex numbers C, and L(X) will denote the Banach algebra of all continuous linear operators on X. Operator will always mean continuous linear operator. An n-tuple of operators T$_{1}$,..,T$_{n}$ on X will be denoted by over ^ T=(T$_{1}$,..,T$_{n}$ ). Let L$^{n}$ (X) be the set of all n-tuples of operators on X. X' will denote the dual space of X, S(X) its unit sphere and .PI.(X) the subset of X*X' defined by .PI.(X)={(x,f).mem.X*X': ∥x∥=∥f∥=f(x)=1}.

• 대한의용생체공학회:의공학회지
• /
• 제14권3호
• /
• pp.235-242
• /
• 1993

In the early stage of sacroilitis, it is'difficult to detect sacroiliac(Sl) abnormalities by conventional plain X-ray even though there are characteristic symptoms of ankylosing spondylitis. 3 dimensional volume rendering from the CT image was performed to make an early de tection of the structural changes of Sl joint. 2 cases who had clinical impression of ankylosing spondylitis without sacroilitis in plane X-ray and 1 case of typical ankylosing spondylitis as well as 1 case of normal control were studied. The Sl Joints were separated and each joint surface of sacrum and ilium was independently reconstructed by a special 3D manipulation program. All 2 patiant who complained of inflammatory lower back pain with no abnormal findings in the plain X-ray showed structural changes in 3 dimensionally reconstructed surface Image of the Sl joint compared to the normal control. Authors tried several parameters, such as fourler analysis of each surface and the mean and variance of Sl joint gap. We couldn't tell the statistical significance because of the limited number of cases. However, the parameters showed difference according to the progression of disease.

• Communications for Statistical Applications and Methods
• /
• 제10권3호
• /
• pp.749-764
• /
• 2003

In this paper we explain that normal theory likelihood-ratio tests(z, t, $x^2$. F) for mean(s) or variance(s) can be geometrically related to volume of difference of two joint pdf's. One is an estimated joint pdf under null parameter space $\omega$ and the other is an estimated joint pdf under full parameter space $\Omega$. For explanations, ‘distance between two distributions’ is defined. We study properties of it, and derive some results on the distance between two multivariate normal distributions.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2007년도 정기 학술대회 논문집
• /
• pp.315-320
• /
• 2007

An effective reinforcement method for steel tubular joints having a large chord diameter is the use of internal ring stiffeners. This paper presents the results of a numerical study on the static strength of internally ring-stiffened tubular X- and T-joints subjected to brace axial compression loading. Nonlinear finite element analyses are used to compute the joint strength. The influence of geometrical parameters has been studied and the maximum reinforcement effect of a ring stiffener has been evaluated. A strength ratio is defined. by the ratio of ring-stiffened joint strength to unstiffened joint strength, and an equation for this strength ratio is derived by regression analysis. Design optimization for ring stiffener of tubular joints is carried out using metropolis genetic algorithm.

• Journal of the Korean Statistical Society
• /
• 제33권2호
• /
• pp.245-254
• /
• 2004

This paper derives a distribution function of the terminal value and running maximum of two-dimensional Brownian motion {X($\tau$) = (X$_1$($\tau$), X$_2$ ($\tau$))', $\tau$ 〉0}. One random variable of the joint distribution is the terminal time value, X$_1$ (T). The other random variable is the maximum of the Brownian motion {X$_2$($\tau$), $\tau$〉} between time s and time t. With this distribution function, this paper also derives an explicit pricing formula for an outside barrier option whose monitoring period starts at an arbitrary date and ends at another arbitrary date before maturity.

• 비파괴검사학회지
• /
• 제29권1호
• /
• pp.43-48
• /
• 2009

The fatigue crack growth behavior of high strength X80 pipeline steel was investigated with compact tension specimens that crack growth directions were aligned either parallel or normal to the rolling direction of the pipeline. Also, the fatigue crack growth rates for welded joint of X80 pipeline steel were investigated with compact tension specimens that crack growth directions were aligned either parallel or normal to the welding line. The experimental results indicated the fatigue crack growth behavior was markedly different in three zones, weld metal, heat affected zone and base metal of welded joints. There was a trend toward increment in the fatigue life of weld metal and heat affected zone as compared with the X80 pipeline steel.

• 한국방사선학회논문지
• /
• 제18권2호
• /
• pp.127-133
• /
• 2024

팔꿉관절은 3개의 뼈대가 조합하여 관절을 이루고 있으며 신체적 활동 및 외력에 의한 이상 시 X-선 등, 방사선 검사로 영상진단을 한다. 팔꿉 관절 선행연구에 의하면 전완부(forearm)의 Z축 거상에 의한 기울기 자세에서 영상평가 기준에 부합하는 새로운 검사법이 발표되어 이에 최적화된 기구를 설계하고 다른 상지 검사에서도 활용 가능한 보조기구를 개발하고자 하였다. 2D 도면 및 3D 모델링 설계로 디자인 후 4부분의 파트로 구분 된 디자인을 ABS 소재의 3D 프린팅 방법으로 출력 후 조립 단계를 거쳐 제품을 완성하였다. 개발된 보조기구는 Z축 거상 기울기 4단계 각도(0, 5, 10, 15도) 기능과 1도 단위로 360도 회전되어 고정하는 기능으로 구성하였다. 개발된 보조기구는 사용 빈도의 누적 및 신체적 활용에 의한 하중 문제에 대해 구조해석을 통하여 최대 등가응력(equivalent stress) 56.107 Pa, 변위(displacement) 1.6548e-5 mm 의 안전한 물성치 범위로 개발되었다. 또한 개발된 보조기구는 팔꿉관절의 X-선 검사뿐만 아니라 위팔뼈 회전에 의한 어깨 기능검사에서도 활용할 수 있으며 비금속 소재로 MRI, CT 검사에서도 적용이 가능하도록 개발되었다. 개발된 보조기구는 향후 다양한 장치 및 의료영상 검사의 임상 적용을 통하여 검사의 정확성 및 효율화에 기여하리라 판단한다.

• Clinics in Shoulder and Elbow
• /
• 제9권2호
• /
• pp.196-201
• /
• 2006

We report two cases of migration of K-wires from the acromioclavicular joint to the neck. A 73-year-old man complained of right shoulder pain for one month and had undergone orthopedic surgery because of acromioclavicular joint dislocation about 27 years earlier. Another 56-year-old man complained of left shoulder pain and neck pain for 5 years and had undergone orthopedic surgery because of acromioclavicular joint dislocation about 25 years earlier. In both cases, we took X-rays to look for the cause of shoulder pain and discovered broken and migrated K-wires in the neck. We removed the K-wires from the trapezius muscle and the paraspinal muscle respectively. K-wire fixation technique is simple and effective but should be followed up with X-rays periodically. In addition, we should warn patients of the possibility of migration of K-wire. And it is desirable for us to avoid using K-wire near major neurovascular structures like the sternoclavicular joint and the clavicle.

• PNF and Movement
• /
• 제5권1호
• /
• pp.49-56
• /
• 2007

Objectives : We find that the reaction force on the elbow joint during elbow flexion, extension with and without an object in the hand can be calculated the equations of motion that the sum of the torque and the sum of the force acting on the elbow joint must be zero and (moment of inertia x angular acceleration) and (mass x acceleration). Methods : we have calculated the equations of motion (${\Sigma}F=0$, ${\Sigma}{\tau}=0$, ${\Sigma}F=ma$, ${\Sigma}{\tau}=Ia$) to investigate the reaction force on the elbow joint during elbow flexion, extension by means of the simplified free-body technique for coplanar forces. Results : we found that the reaction force on the elbow joint during elbow flexion, extention as constant acceleration motion is more than constant velocity, static motion. Also, we found that the relation between during flexion and during extension like this ; $J_{flexion}$ < $J_{extension}$.

• 한국산학기술학회논문지
• /
• 제7권2호
• /
• pp.113-119
• /
• 2006

중수로형 핵연료 제조공정 중 연료봉 피복관에 간격체와 지지체 등의 부착물이 브레이징으로 접합된다. 본 연구에서는 베릴륨을 물리 증착법(PVD)으로 접합될 부착물의 표면에 증착한 것과 비정질 용가재[$Zr_{1-x}Be_{x}(0.3{\le}x{\le}0.5)$]를 사용하여 브레이징된 접합부의 미세조직과 경도 등의 특성을 비교하고 브레이징 온도가 접합부에 미치는 영향 조사하였다. 비정질 용가재에 의한 접합층의 두께는 PVD-Be의 경우와 비교하여 더 얇았고, Be 함량이 감소할수록 접합층의 두께는 감소하였으며 모재의 침식은 거의 없었다. PVD-Be의 경우 공정 반응, 액상 출현, 모세관 현상과 확산으로 브레이징 되나 비정질 합금은 용가재 만이 용융되어 액상 접합되는 것으로 사료된다. PVD-Be 접합부의 미세조직은 계면에서 수지상이 형성되어 내부로 성장하나, 비정질 합금에 의한 접합부는 석출된 제2상들이 구상으로 구성되며 브레이징 온도가 증가할수록 구상은 더욱 커졌다. 비정질 합금 접합부의 경도는 Be 함량이 감소할수록 경도는 증가하였다. 본 연구에 사용된 비정질 합금 중 $Zr_{0.7}Be_{0.3}$ 합금은 접합부에서 Be의 모재로의 확산이 적어 부드러운 계면과 모재의 침식이 없었고 높은 경도 때문에 핵연료 피복재 접합에 가장 적합한 용가재로 사료된다.