• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.241-246
• /
• 2024

The study was carried out by numerical integration based on the diffraction properties and elemental composition. The elemental compositions of breast tissues in the literature were tested. The photon attenuation coefficients calculated using the recent elemental composition were found within 0.2-16% for adipose tissue and within 0.04-17% for glandular tissue with the experimental reference data. The attenuation coefficients of cancerous breast tissue calculated according to the elemental content previously measured in breast cancer patients were found within 0-17% with experimental data in the literature. The attenuation coefficients are of great interest to medical research. To calculate realistic attenuation coefficients, the characteristic coherent scatter, which is most intense at small angles, must be considered. For this reason, experimentally measured form factor data were reviewed, and the most compatible one with the theoretical form factor data produced in this study was used at low momentum transfer x (0 < x ≤ 8 nm^-1). The differential linear coherent scattering distributions were calculated for an energy value of 17.44 keV and compared with their experimental counterparts.

• Journal of the Korean Society of Radiology
• /
• v.11 no.7
• /
• pp.663-669
• /
• 2017

In diagnostic medical imaging, it is essential to reduce the scattered radiation for the high medical image quality and low patient dose. Therefore, in this study, the influence of the scattered radiation on medical images was analyzed as the tube voltage increases. For this purpose, ANSI chest phantom was used to measure the scattering ratio, and the scattering effect on the image quality was investigated by RMS evaluation, RSD and NPS analysis. It was found that the scattering ratio with increasing x-ray tube voltage gradually increased to 48.8% at 73 kV tube voltage and to 80.1% at 93 kV tube voltage. As a result of RMS analysis for evaluating the image quality, RMS value according to increase of tube voltage was increased, resulting in low image quality. Also, the NPS value at 2.5 lp/mm spatial frequency was increased by 20% when the tube voltage was increased by 93 kV compared to the tube voltage of 73 kV. From this study, it can be seen that the scattering radiation have a significant effect on the image quality according to the increase of x-ray tube voltage. The results of this study can be used as basic data for the improvement of medical imaging quality.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.02a
• /
• pp.100-100
• /
• 2005

• Proceedings of the Korean Vacuum Society Conference
• /
• 2008.08a
• /
• pp.220-220
• /
• 2008

• Proceedings of the Korean Magnestics Society Conference
• /
• 2017.05a
• /
• pp.11-11
• /
• 2017

• Proceedings of the Korean Vacuum Society Conference
• /
• 2005.08a
• /
• pp.50-50
• /
• 2005

• Economic and Environmental Geology
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2003

This study was performed to measure expandabilities and coherent scattering domain sizes (CSDs) of bentonite samples from Campo and Yonil area, Korea, using X-ray powder diffraction (XRD), and to compare their experimental data with those of international standard bentonite samples (SAz-1, STx-1, and SWy-2). Most of Gampo and Yonil bentonite samples comprised randomly interstratified illite-smectite (R0 I-S), and their expandabilities ranged over 77-100%S$_{XRD}$ from the saddle/001 method. The interstratification deformed 001 peaks of EG-solvated samples (Mering's first principle), which prohibited us from adopting these peaks to measure CSDs using BWA (Bertaut-Warren-Averbach) method. CSDs of the bentonite samples with R0 I-S could be measured through dehydration at 30$0^{\circ}C$ after K-saturation, where the deformation originated from the interstratification could be removed effectively. Campo and Yonil bentonite samples showed that their mean CSDs ranged over 3.8-5.4 interlayers, and that their CSDs distributions were similar to those of Gonzales (STx-1) and Wyoming (SWy-2) bentonite samples.

• Macromolecular Research
• /
• v.15 no.6
• /
• pp.553-559
• /
• 2007

Nanocomposite films were prepared by sol-gel synthesis from vanadium triisopropoxide with $poly((oxyethylene)_9$ methacrylate)-graft-poly(dimethyl siloxane), POEM-g-PDMS, producing in situ growth of vanadium oxide within the continuous ion-conducting POEM domains of micro phase-separated graft copolymer. The formation of vanadium oxide was confirmed by wide angle x-ray scattering (WAXS) and Fourier transform infrared (FT-IR) spectroscopy. Small angle x-ray scattering (SAXS) revealed the spatially-selective incorporation of vanadium oxide in the POEM domains. Upon the incorporation of vanadium oxide, the domain periodicity of the graft copolymer monotonously increased from 17.2 to 21.0 nm at a vanadium content 14 v%, above which it remained almost invariant. The selective interaction of vanadium oxide with POEM was further verified by differential scanning calorimetry (DSC) and FT-IR spectroscopy. The nanocomposite films exhibited excellent mechanical properties $(l0^{-5}-10^{-7}dyne/cm^2)$, mostly due to the confinement of vanadium oxide in the POEM chains as well as the interfaces created by the microphase separation of the graft copolymer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.275.1-275.1
• /
• 2014

The effects of the interfacial buffer layer and temperature on the organic bulk heterojunction (BHJ) nanostructures of copper phthalocyanine (CuPc) and fullerene (C60) systems were investigated using real time in-situ x-ray scattering. In the CuPc:C60 BHJ structures, standing-on configured ${\gamma}$-CuPc phase was formed by co-deposition of CuPc and C60. Once formed ${\gamma}$-phase was thermally stable during the annealing upon $180^{\circ}C$. Meanwhile, the insertion of CuI buffer layer prior to deposition of the CuPc:C60 BHJ layer induced lying-down configured CuPc crystals in the BHJ layer. The lying CuPc peak intensity and the lattice parameter were increased by the thermal annealing. This increment of the intensity seemed to be related to the strain at the interface between CuPc:C60 and CuI, which was proportional to the enhancement of the power conversion efficiency of the device.

• Macromolecular Research
• /
• v.14 no.6
• /
• pp.640-645
• /
• 2006

Polyethylene of bimodal molecular weight distribution was irradiated with an electron beam. The thermal and mechanical properties were examined by DSC, small and wide angle X-ray scattering and static tensile test according to the crystal morphology of the irradiated samples. The crystal morphology change upon irradiation, as revealed by wide angle X-ray scattering, correlated well with the changes in melting enthalpy, whereas the lamellar thickness and the amorphous gap thickness remained virtually unchanged at irradiation doses up to 500 kGy. Crosslinks in the crystal domains became evident at an energy level of 250 kGy, resulting in reduced crystallinity and crystal size of the (110) and (200) planes. The samples became stiff and brittle with increased irradiation dose, which seem to be more relevant to the amount of cross links than the crystal morphology changes.