• 인터넷정보학회논문지
• /
• 제4권3호
• /
• pp.57-67
• /
• 2003

소프트웨어 생산 라인은. 소프트웨어 자산에 존재하는 일반적인 컴포넌트를 구체화하고 미리 정의된 아키텍처를 기반으로 조립함으로써, 고품질의 응용 프로그램을 빠르게 개발할 수 있도록 해 주는 것을 목적으로 한다. 본 논문에서는, 소프트웨어 생산 라인 구축을 지원하기 위하여 GenVoco 아키텍처와 XML/XSLT 기술을 이용한 컴포넌트 코드 자동 생성 기법과, 이를 기반으로 한 컴포넌트 코드 생성 시스템인 CompGenX(Component Generator using XML)를 제안한다. CompGenX은 컴포넌트 코드 생성 시에 컴포넌트의 재구성성을 지원함으로써 재사용자가 컴포넌트 재사용 시 자신의 목적에 맞는 컴포넌트의 소스 코드를 자동으로 생성할 수 있게 해 준다. 이를 위한 컴포넌트 개발 과정은 크게 컴포넌트 패밀리 구축 과정과 컴포넌트 재사용 과정으로 나누어진다. CompGenX는 컴포넌트 패밀리 구축 과정을 위하여, 도메인 분석을 위한 특성 모델 작성 도구, 도메인 설계를 위한 도메인 아키텍처 정의 도구를 제공한다. 또한 코드 자동 생성에 필요한 구성 지식 명세서와 코드 템플릿 작성 도구를 제공한다. 컴포넌트 재사용 과정을 위해서 CompGenX는, 컴포넌트 패밀리 검색 도구, 컴포넌트 커스터마이징 도구 및 컴포넌트 코드 생성기 등을 제공한다. 본 논문의 컴포넌트 코드 자동 생성 기법과 생성 시스템은 컴포넌트 기반 소프트웨어 생산 라인 구축을 위한 기반 기술로서 적용될 수 있다.

• 대한기계학회논문집B
• /
• 제27권10호
• /
• pp.1442-1449
• /
• 2003

We investigated the amount of the toxic gases emitted from the Electrostatic Precipitators(ESPs), which are currently used as the indoor air cleaners. The existing wire-to-plate(WTP) and neddle-to-plate(NTP) types of ESP designs are considered as the experimental corona dischargers. Using the voltage, the polarity of wire, the number of needles of NTP as the input variables, we studied the generation characteristics of ozone and $NO_{x}$ and the particle removal efficiency in the ESPs. As the results, we found out that the concentration of ozone, $NO_{2}$ and $NO_{x}$ is increased with increasing the voltage and the number of needles, but the amount of NO is decreased. And we observed that the generation rates of ozone and $NO_{x}$ are mainly related with the corona region through the photographs. Finally the experimental results showed that the particle removal efficiency of ESP with WTP type charger is more superior to that with NTP type chargers at the same voltage.

• 한국결정학회지
• /
• 제11권1호
• /
• pp.16-21
• /
• 2000

(Yb/sub x/Y/sub 1-x/)Ca₄O(BO₃)₃ single crystals where x=0.3,8,15,20% were grown by Czochralski Method. The crystals grown under the optimum conditions were transparent and colorless with good crystal form. Using polarizing microscope, crystal defects such as parasite crystals and bubbles were detected depending on the composition of melts and pulling rates. The optimum growth parameters for high quality of single crystals were 15∼20 rpm of rotation rate and 2mm/h of pulling rate at the flow rate of 2 l/min of Nitrogen gas. The relationship between crystal axes and optical axes was investigated by optical crystallographic method, polarization technique and single crystal X-ray method. From the spectroscopic measurements, it was confirmed that there were strong absorption bands at 900 and 976.4 nm and strong emission band at 976.4 nm in Yb/sup 3+/ ion doped YCa₄O(BO₃)₃ crystal. For the application of second harmonic generation of 1.064 ㎛ laser, non-linear optical devices with θ=32.32° and Ψ=0°, λ/10 of flatness and the size of 6x8x5.73 mm were fabricated from the grown YCa₄O(BO₃)₃ crystal.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1995년도 광학 및 양자전자학 워크샵 논문집
• /
• pp.185-189
• /
• 1995

A high-power Nb:glass laser system(Simmyung I) has been contructed and tested. In this system, we used a Nb:YLF laser as a master oscillator, a 4-pass amplifier for pre-amplification, 5 stages of rod amplifiers, and spatial filtering and image reaying usits. The system has demonstrated in excess of 80J(2TW) with 40 psec(FWHM) pulse duration. Output energy, gain and spatial were measured at each amplification stage. With this laser system a preliminary X-ray generation experiment was performed. Pinhole images, X-ray diode signals and X-ray speriment were obtained for the irradiated target of copper. Detailed descriptions of the system performance and the X-tay generation experiment are presented.

• Journal of the Optical Society of Korea
• /
• 제14권4호
• /
• pp.333-336
• /
• 2010

The generation of coherent x-ray beams by using a multi-slit diffraction phenomenon is presented. The mode-confinement conditions in the x-ray waveguide (XWG) needed to obtain single-mode beams are determined. The XWGs are stacked to form an XWG array. The core of the XWG array is used as a slit in an opaque screen, similar to those used for visible light. Diffraction patterns that interfered constructively in the XWG array are investigated based on multi-slit diffraction theory. The irradiance distributions are studied at on observation screen. The FWHM of diffracted x-ray spectra were between $1.67{\times}10^{-4}$ to $3.30{\times}10^{-5}$ radians which lead to a spot-size of a few tens of micrometers on the screen at distance of 1 m. The intensities decrease with increase in the period of the XWG array, i.e. a thicker cladding, due to growth of the higher-order diffraction peaks.

• 복식
• /
• 제48권
• /
• pp.37-52
• /
• 1999

The purpose of this study was to find out the clothing-consumption propensity(CCP) and to classify consumption types in CCP and to classify consumption types in CCP and to compare the classfied groups on their consumer characteristics among Korean female X-generation. The survey method was conducted for this study. The subjects are 477 Koran femal X-generation whose age ranges from 18 to 29 and who reside in Seoul and its adjoined areas. The span of the survey was February through March in 1998. the results were analyzed by using of SPSS/PC+package. 1. The clothing consumption motives among the female X-generation were the sensuous satisfaction for posession motive the were practical necessity of the purcahse successively in order. The clothing consumption attitude were the practical electicism the effective value the favorable attitude on low price goods toward sale items and the self-control over their consumption. 2. According to the CCP consumers were classified into five groups: electice and practical group ostentatious and extravagant group passive and economical group sensuous and practical group and sale-fond group. The respective group showed significant difference in the nine factors of the CCP. 3. Consumtion type group had significantly difference in lifestyle among consumer factor and materialistic propensity influence of economic recession follow consumption among social influence factors.

• 한국컴퓨터정보학회논문지
• /
• 제26권8호
• /
• pp.187-196
• /
• 2021

본 연구는 한국복지패널(KOWEPS)의 11차 년도(2016년)부터 15차 년도(2020년)까지 조사가 완료된 5개년도 자료를 활용하여 1인 가구 중심으로 세대별 각 개인의 생활만족도를 잠재성장모형을 이용하여 종단으로 분석하는 연구이다. 세대 구분은 사회화 과정, 역사적 사건, 기술의 발달 등을 요소로 하여 결정적 국면의 전환을 가져온 코호트가 경험한 중대한 사건의 분기점을 기준으로 하였다. 본 연구에서 사용된 분석 자료는 한국복지패널 15차 년도(2020년) 27,447명 중 지난 5개 년도에서 1차 년도라도 1인 가구였던 2,778명을 대상으로 하여, 5년 동안 지속적으로 1인가구인 1,448명중 1922년생부터 1944년생(843명)을 제외하고 1945년생부터 1996년생까지 605명을 대상으로 하였다. 연구 결과 X세대(신세대)보다는 Y세대(밀레니얼세대), 베이비부머세대 보다는 X세대가 높은 전반적인 생활만족도를 보였으며, 세대별 전반적인 생활만족도가 변화율에는 영향을 미치지 못하기 때문에 각 세대별 모두가 이러한 차이는 지속적으로 동일하게 유지된다는 것을 파악하였다.

• 대한금속재료학회지
• /
• 제50권2호
• /
• pp.183-190
• /
• 2012

Hydrogen was generated by the reaction of metal hydride with water. The variation of hydrogen generation with the kind of powders (milled $MgH_2$, and $MgH_2$ milled with various contents of MgO, $MgCl_2$ or $Ni+Nb_2O_5$) was investigated. $MgH_2$ powder with a hydrogen content of 6.05 wt% from Aldrich Company was used. Hydrogen is generated by the reaction of Mg as well as $MgH_2$ with water, resulting in the formation of byproduct $Mg(OH)_2$. For about 5 min of reaction time, milled $95%MgH_2+5%MgO$ has the highest hydrogen generation rate among milled $MgH_2+x%MgO$ (x=0, 5, 10, 15 and 20) samples. Milled $90%MgH_2+10%MgCl_2$ has the highest hydrogen generation rate among all the samples.

• 한국표면공학회지
• /
• 제47권4호
• /
• pp.210-214
• /
• 2014

We investigated emission characteristics of tandem organic light emitting devices (OLEDs) with p-type materials as charge generation layer. The tandem OLEDs were fabricated by using $MoO_x$, $WO_x$, C60 and HATCN as p-type material or not using p-type material for charge generation. When HATCN was used as p-type material, it showed high current density at low applied voltage, but increase of efficiency was small because of charge unbalance in emitting layer. In case of tandem OLED not using p-type material, applied voltage increased remarkably because of difficulty of hole injection. In case of $MoO_x$, $WO_x$ or C60 as p-type material, current emission efficiency increased greatly. In particular, current emission efficiency of tandem OLED using $MoO_x$ as p-type material increased up to 3 times than current emission efficiency of single OLED. The Commission Internationale de l'Eclairage (CIE) 1931 color coordinates were changed by overlapping of 504 nm emission wavelength. As a result, emission efficiency of tandem OLED improved compared with single OLED, but driving voltage also increased by increase of organic layer thickness.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.20-28
• /
• 2016

This paper presents a generation rescheduling method for the enhancement of transient stability in power systems. The priority and the candidate generators for rescheduling are calculated by using the energy margin sensitivity. The generation rescheduling formulates the Lagrangian function with the fuel cost and emission such as NO_x and SO_x from power plants. The generation rescheduling searches for the solution that minimizes the Lagrangian function by using the Newton’s approach. While the Pareto optimum in the fuel cost and emission minimization has a drawback of finding a number of non-dominated solutions, the proposed approach can explore the non-inferior solutions of the multiobjective optimization problem more efficiently. The method proposed is applied to a 4-machine 6-bus system to demonstrate its effectiveness.