• Journal of the Korea Society for Simulation
• /
• v.17 no.3
• /
• pp.27-34
• /
• 2008

Wireless sensor networks are comprised of sensor nodes with resource-constrained hardware. Nodes in the sensor network without adequate protection may be compromised by adversaries. Such compromised nodes are vulnerable to the attacks like false reports injection attacks and false data injection attacks on legitimate reports. In false report injection attacks, an adversary injects false report into the network with the goal of deceiving the sink or the depletion of the finite amount of energy in a battery powered network. In false data injection attacks on legitimate reports, the attacker may inject a false data for every legitimate report. To address such attacks, the probabilistic voting-based filtering scheme (PVFS) has been proposed by Li and Wu. However, each cluster head in PVFS needs additional transmission device. Therefore, this paper proposes a fuzzy logic-based false report detection method (FRD) to mitigate the threat of these attacks. FRD employs the statistical en-route filtering scheme as a basis and improves upon it. We demonstrate that FRD is efficient with respect to the security it provides, and allows a tradeoff between security and energy consumption, as shown in the simulation.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.3
• /
• pp.115-122
• /
• 2008

Wu and Tsai's pixel-value differencing method and Chang and Tseng's side-match method are based on the theory that the number of bits which can be embedded is determined by the degree of the pixel's smoothness, or its proximity to the edge of the image. If pixels are located in the edge area, they may tolerate larger changes than those in smooth areas. However, both methods are subject to the fall off the boundary problem(FOBP). This study proposes a new scheme that can solve the FOBP. The experimental results demonstrate that the proposed method resolves the problem, and achieves a higher image quality index value than other methods.

• Geomechanics and Engineering
• /
• v.38 no.4
• /
• pp.381-395
• /
• 2024

With the wide application of urban subway tunnels, the foundation pits of new stations and existing subway tunnels are becoming increasingly close, and even zero-distance close-fitting construction has taken place. To optimize the construction support scheme, the existing tunnel's vertical displacement is theoretically analyzed using the two-stage analysis method to understand the action mechanism of the construction of zero-distance deep large foundation pits on both sides of the existing stations; a three-dimensional numerical calculation is also performed for further analysis. First, the additional stress field on the existing tunnel caused by the unloading of zero-distance foundation pits on both sides of the tunnel is derived based on the Mindlin stress solution of a semi-infinite elastic body under internal load. Then, considering the existing subway tunnel's joints, shear stiffness, and shear soil deformation effect, the tunnel is regarded as a Timoshenko beam placed on the Kerr foundation; a sixth-order differential control equation of the tunnel under the action of additional stress is subsequently established for solving the vertical displacement of the tunnel. These theoretical calculation results are then compared with the numerical simulation results and monitoring data. Finally, an optimized foundation pit support scheme is obtained considering the pit corner effect and external corner failure mode. The research shows a high consistency between the monitoring data,analytical and numerical solution, and the closer the tunnel is to the foundation pit, the more uplift deformation will occur. The internal corner of the foundation pit can restrain the deformation of the tunnel and the retaining structure, while the external corner can cause local stress concentration on the diaphragm wall. The proposed optimization scheme can effectively reduce construction costs while meeting the safety requirements of foundation pit support structures.

• Journal of Mechanical Science and Technology
• /
• v.14 no.6
• /
• pp.666-674
• /
• 2000

Large deflection dynamic responses of laminated composite cylindrical shells under impact are analyzed by the geometrically nonlinear finite element method based on a generalized Sander's shell theory with the first order transverse shear deformation and the von-Karman large deflection assumption. A modified indentation law with inelastic indentation is employed for the contact force. The nonlinear finite element equations of motion of shell and an impactor along with the contact laws are solved numerically using Newmark's time marching integration scheme in conjunction with Akay type successive iteration in each step. The ply failure region of the laminated shell is estimated using the Tsai- Wu quadratic interaction criteria. Numerical results, including the contact force histories, deflections and strains are presented and compared with the ones by linear analysis. The effect of the radius of curvature on the composite shell behaviors is investigated and discussed.

• Journal of Advanced Navigation Technology
• /
• v.15 no.5
• /
• pp.764-773
• /
• 2011

IEEE 802.15.4 is a standard for LWPAN based on TDMA. IEEE 802.15.4 has not been used widely because of restrictions on the QoS, scalability, and reliability. IEEE 802.15.4 utilizes GTS for one-hop QoS transmission. However GTS is not an effective method to satisfy QoS in multi-hop environments. Currently IEEE 802.15.4e, an extended version of IEEE 802.15.4 MAC sub-layer, is being developed to satisfy more diverse performance requirements than IEEE 802.15.4. IEEE 802.15.4e provides muti-hop QoS transmission functionality and uses multiple frequency channels. In this paper, a multi-channel TDMA scheduling scheme is proposed to satisfy end-to-end transmission delay in IEEE 802.15.4e. The performance of the proposed scheme is evaluated using simulation.

• Journal of the Society of Naval Architects of Korea
• /
• v.36 no.1
• /
• pp.70-81
• /
• 1999

To predict the viscous boundary layers and wakes around a ship, the CFD techniques are commonly used. For the efficient application of CFD tools to practical hull farms, a 3-D field grid generating system is developed. The present grid generating system utilizes the solution of Poisson equation. Sorenson's method developed for 2-D is extended into 3-D to provide the forcing functions controling grid interval and orthogonality on hull surface, etc. The weighting function scheme is used for the discretization of the Poisson equation and the linear equations are solved by using MSIP salver. The trans-finite interpolation is also employed to assure the smooth transition into boundary surface grids. To rove the applicability, the field grid systems around a container ship and a VLCC with bow and stem bulb are illustrated, and the procedures for generating 3-D field grid system are explained.

• Nuclear Engineering and Technology
• /
• v.52 no.2
• /
• pp.258-270
• /
• 2020

A new task of using the Jacobian-Free-Newton-Krylov (JFNK) method for the PWR core transient simulations involving neutronics, thermal hydraulics and mechanics is conducted. For the transient scenario of PWR, normally the Picard iteration of the coupled coarse-mesh nodal equations and parallel channel TH equations is performed to get the transient solution. In order to solve the coupled equations faster and more stable, the Newton Krylov (NK) method based on the explicit matrix was studied. However, the NK method is hard to be extended to the cases with more physics phenomenon coupled, thus the JFNK based iteration scheme is developed for the nodal method and parallel-channel TH method. The local gap conductance is sensitive to the gap width and will influence the temperature distribution in the fuel rod significantly. To further consider the local gap conductance during the transient scenario, a 1D mechanics model is coupled into the JFNK scheme to account for the fuel thermal expansion effect. To improve the efficiency, the physics-based precondition and scaling technique are developed for the JFNK iteration. Numerical tests show good convergence behavior of the iterations and demonstrate the influence of the fuel thermal expansion effect during the rod ejection problems.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.5
• /
• pp.2396-2413
• /
• 2018

Trust management is one of the most challenging issues for the highly heterogeneous Internet of Things (IoT). In the context of the IoT, it is difficult to evaluate the node's trustworthiness in the same trust model when a node provides different services. Guaranteeing the availability of the trust management service is another significant challenge because of the dynamic nature of IoT environments. With these issues in mind, this paper propose a robust and adaptive trust management system for the IoT that is able to measure the trustworthiness of nodes based on feedbacks collected from participants in a specific context and ensure the availability of trust management services. The main contributions of our system are: 1) Proposing a partly decentralized trust management framework, which improves the resiliency of the trust mechanism; 2) Proposing an adaptive trust evaluation scheme and a three-dimensional context representation makes trust evaluation more accurate and specific; 3) Enhancing the adaptive trust evaluation scheme by incorporating a bad behavior factor in trust estimation, which efficiently distinguishes misleading feedbacks from On-Off attacks. Simulation results show the good performance of the proposed system and especially show effectiveness against On-Off attacks compared to other trust mechanisms.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.29B no.8
• /
• pp.54-65
• /
• 1992

A huge amount of multiplications is required for 2-D filtering on the image data, making it difficult to implement a real-time quincuncial interpolator. In this paper, efficient design technique and VLSI structures for 2-D multipleierless filter are presented. In the filter design, by introducing an efficient scheme for discretizing the frequency response of the prototype filter, it is shown that a significant amount of the computational burden required in the conventional techniques, such as local search, branch and bound techniques, could be saved. In the case of 5$\times$5 filter, it is found that the design technique described in this paper could save about 80% of the computation time, compared to the conventional methods, while providing a comparable performance. For a hardware implementation, two different VLSI structures for 2-D multiplierless filter are also introduced in the paper : One is for block parallel processing and the other for scan-line parallel processing. In both structure, the AP(area-period) figure improves over Wu's structure[4].

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.1487-1490
• /
• 2006

One of the factors deteriorating PDP image quality is the nonlinearity and nonuniform of output luminance as a function of input gray level. A novel method using modified ADS driving scheme is proposed to decrease this nonlinearity. It optimizes the reset pulse and adjusts the subfields, makes the relation of output luminance and input gray level almost linear. This method can be applied to general commercial PDPs.