• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1373-1378
• /
• 2007

Metal forming ins the process changing shapes and mechanical properties of the workpiece without initial material reduction through plastic deformation. Above all, because of hot working carried out above recrystallization temperature can be generated large deformation with one blow, it can produce with forging complicated parts or heat resisting super alloy such as Inconel 718 has the worst forgeability. In this paper, we established optimal variation of hot heading precess of the Inconel 718 used in heat resisting component and evaluated mechanical properties hot worked produce. Die material is SKD61 and initial temperature is $300^{\circ}C$. Initial billet temperature and punch velocity changed, relatively. Friction coefficient is 0.3 as lubricated condition of hot working. CAE is carried out suing DEFORM software before making the tryout part, and it is manufactured 150 ton screw press with optimal condition. It is known that forming load was decreased according to decreasing punch velocity.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.22-25
• /
• 2002

In this paper, we deposited MgO buffer layer on p-type (100)Si substrate in the condition of substrate temperature 400$^{\circ}C$, working gas ratio Ar:O$_2$=80:20, RF Power 50W, working pressure 10mtorr, and the thickness of the film was about 300${\AA}$. Then we deposited Ba$\sub$0.5/Sr$\sub$0.5/TiO$_3$ thin film using RF Magnetron sputtering method on the MgO/Si substrate in various RF power of 25W, 50W, 75W. The film deposited in 50W showed the best crystalline from the XRD measurement. To know the electrical properties of the film, we manufactured Al/BSTMgO(300${\AA}$)/Si/Al structure capacitor. In the result of I-V measurement, The leakage current density of the capacitor was lower than 10$\^$-7/A/$\textrm{cm}^2$ at the range of ${\pm}$150kV/cm. From C-V characteristics of the capacitor, can calculate the dielectric constant and it was 305. Finally we deposited BST thin film on bare Si substrate and (100)MgO substrate in the same deposition condition. From the comparate of the properties of these samples, we found the properties of BST thin film which deposited on MgO/Si substrate were better than on bare Si substrate and similar to on MgO substrate.

• The Journal of Korean Physical Therapy
• /
• 제4권1호
• /
• pp.59-67
• /
• 1992

This study was carried out by using questionnaires with 230 lumbago patients who visited the general hospitals, orthopedic clinics, neurosurgery clinics and physical treatment centers in Taequ. Korea for one month from December 20, 1991 to January 20, 1992. The result of this study is summarized as follows. 1. 203 patients consisted of 113 males and 90 females, while 65 patients were was which was the highest percentage. 2. The relation between their occupational properties and lumbago indicated that there was significant relation in their total employed period, job hours, monthly average incomes(P<0.01), job satisfaction, working posture, mental stress(P<0.01), excessive usage of bark during working, lifting of heavy thing and serious noises. 3. The relation between social properties and lunbago showed that there was a remarkable relation in their introspective character(P<0.05). daily average riding hour(P<0.05), smoking(P<0.01), drinking(P<0.01) and insufficient physical exercise. 4. The relation between the clinical properties and lunbago indicated that the lumbago was mainly caused by lifting the heavy thing, which was continued fur three months or longer. And, it was shown that they consider the lumbago as one of serious diseases. In addition. they positively evaluated their physical treatment. Therefore, it is required to accomplish the comprehensive treatment of this lumbago on the basis of the educational contents centering around its prevention by performing more suitable health education.

• Safety and Health at Work
• /
• 제6권4호
• /
• pp.338-344
• /
• 2015

Background: The present study aims to investigate job stressors and stress relievers for Korean emotional laborers, specifically focusing on the effects of work conditions and emotional labor properties. Emotional laborers are asked to hide or distort their real emotions in their interaction with clients. They are exposed to high levels of stress in the emotional labor process, which leads to serious mental health risks including burnout, depression, and even suicide impulse. Exploring job stressors and relieving factors would be the first step in seeking alternatives to protect emotional laborers from those mental health risks. Methods: Using the third wave data of Korean Working Conditions Survey, logistic regression analysis was conducted for two purposes: to examine the relations of emotional labor and stress, and to find out job stressors and relievers for emotional laborers. Results: The chances of stress arousal are 3.5 times higher for emotional laborers; emotional laborers experience double risk-burden for stress arousal. In addition to general job stressors, emotional laborers need to bear burdens related to emotional labor properties. The effect of social support at the workplace is not significant for stress relief, unlike common assumptions, whereas subjective satisfaction (wage satisfaction and work-life balance) is proven to have relieving effects on emotional laborers' job stress. Conclusion: From the results, the importance of a balanced understanding of emotional labor for establishing effective policies for emotional laborer protection is stressed.

• Geomechanics and Engineering
• /
• 제36권5호
• /
• pp.427-440
• /
• 2024

This study concentrates on the 301 comprehensive caving working face, notable for its considerable mining height. The roof model is established by integrating prior geological data and the latest borehole rock stratum's physical and mechanical parameters. This comprehensive approach enables the determination of lithology, thickness, and mechanical properties of the roof within 50 m of the primary mining coal seam. Utilizing the transfer rock beam theory and incorporating mining pressure monitoring data, the study delves into the geometric parameters of the direct roof, basic roof movement, and roof pressure during the initial mining process of the 301 comprehensive caving working face. The direct roof of the mining working face is stratified into upper and lower sections. The lower direct roof consists of 6.0 m thick coarse sandstone, while the upper direct roof comprises 9.2 m coarse sandstone, 2.6 m sandy mudstone, and 2.8 m medium sandstone. The basic roof stratum, totaling 22.1 m in thickness, includes layers such as silty sand, medium sandstone, sandy mudstone, and coal. The first pressure step of the basic roof is 61.6 m, with theoretical research indicating a maximum roof pressure of 1.62 MPa during periodic pressure. Extensive simulations and analyses of roof subsidence and advanced abutment pressure under varying working face lengths. Optimal roof control effect is observed when the mining face length falls within the range of 140 m-155 m. This study holds significance as it optimizes the working face length in thick coal seams, enhancing safety and efficiency in coal mining operations.

• 한국안전학회지
• /
• 제12권1호
• /
• pp.19-28
• /
• 1997

This study was made of the effect of cold working on the stress corrosion cracking(SCC) of austenitlc 304 stainless steel in boiling 42% $MgCl_2$ solution. For this experiment, specimens cold-worked of 0%, 10%, 20%, 30%, 40% were fabricated respectively, and then experiments of mechanical properties and stress corrosion cracking(SCC) of these specimens were carried out. The results of these experiments indicate that the maximum resistance to SCC showed at 20% of cold working degree and that the SCC susceptibility depended on the volume fraction of deformation-induced martensite by cold working and the work hardening of matrix. On the other hand, the fracture mode was changed. This phenomenon was considered that deformation-induced martensite was grown from transgranular fracture mode to intergranular fracture mode and caused by increased of dislocation density along the slip planes.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 금형가공 심포지엄
• /
• pp.28-42
• /
• 1998

Spinning is one of the incremental forming process by the rotating mandrel and forming roller, and has been applied to manufacturing the wheel disc of automobile to simplify the manufacturing process and to improve the mechanical properties of product. In the proesent study the process variables have been extracted and considered to decide the specification of the spinning machine. The maximum values of working load and power have been evaluated and the blank size has been disigned. The shape and dimensionof forming roller have been designed and the process condition such a s rotational velocity of mandrel and the feedrate of roller have been decided.

• Journal of Magnetics
• /
• 제13권4호
• /
• pp.160-162
• /
• 2008

In this work the magnetic anisotropies of magnetostriction material $Tb(Fe_{0.55}Co_{0.45})_{1.5}$ (named a-TerfecoHan) films were investigated with respect to working pressures in the range 1-7 mTorr. The results obtained show that perpendicular magnetic anisotropy (PMA) can be obtained at a working pressure above 5.1 mTorr. XRD was utilized to clarify the origin of the PMA observed in $Tb(Fe_{0.55}Co_{0.45})_{1.5}$ films, and revealed that all samples were amorphous. Therefore, we propose that the PMA effect is explained by stress produced in film due to internal relaxation process and magnetic anisotropy enhancements caused by magnetoelastic interactions.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.39-42
• /
• 2008

Alloy 718 nozzle component was manufactured by hot working and electron beam welding process. In this process, domestic 718 materials were applied and evaluated. Hot compression tests were carried out at a lot of process conditions and microstructural evaluation was investigated. Using the results, FEM simulations were performed in order to optimize the hot working process. After hot working, forged work-pieces were machined and welded by electron beam. Final nozzle component were heat treated and their microstructure and mechanical properties were investigated.

• 천문학회보
• /
• 제46권1호
• /
• pp.53.1-53.1
• /
• 2021

Dwarf galaxies are the most abundant objects in the universe. Hence, understanding the dwarfs is important but relatively little is known due to the lack of computing power and limitations in the telescope resolution. We thus use the state-of-the-art NewHorizon simulation, which is a set of cosmological hydrodynamical simulations, to dissect the quenching mechanism working on dwarf galaxies by inspecting the star formation and mass history of individual galaxies. It is known that internal (AGN, SN, stellar feedback) and external (major and minor mergers, ram pressure stripping, strangulation) mechanisms affect the quenching of dwarfs. Because of the combination of these mechanisms, periodicity in the star formation history of the dwarf galaxies is expected. To check for their periodicity, Fourier transform was performed on the star formation history. By comparing the physical timescales and the periodicity, we determine the dominant effect working on the dwarfs. Then, we compare the dominant effects working on the galaxies according to their varying properties.