• 한국체육학회지인문사회과학편
• /
• v.55 no.2
• /
• pp.603-615
• /
• 2016

This study was conducted by performing intensities aerobic exercise for 12 weeks, three times a week targeting 28 middle aged women. The purpose of this study was analyzing factors which affect cognitive function and changes of blood pressure, renin-aldosterone system, neurotransmitter, cognitive function and working memory after treatment. The participants were divided into three groups which are the control group(n=9, non exercise), moderate intensity aerobic exercise group(n=10, 50%V02max), high intensity aerobic exercise group(n=9, 70%V02max). The two-way ANOVA(repeated measure) and multiple regression analysis were carried out to target those three groups before and after treatment. The results were as follows like this. The moderate intensity aerobic exercise increased renin, brain derived neurotrophic factor(BDNF), cognitive function and working memory. Also, it reduced aldosterone, angiotensinII and aldosterone-renin ratio. The high intensity aerobic exercise showed increase BDNF, cognitive function and working memory and decrease systolic. As a result of a multiple regression analysis of factors affecting cognitive function after intensities aerobic exercise, the moderate intensity aerobic exercise affected diastolic blood pressure, decrease of aldosterone-renin ratio and working memory. Also, an increase of BDNF affected cognitive function, the high intensity aerobic exercise affected working memory BDNF and an increase of serotonin affected cognitive function. Therefore, It could be seen that more than moderate intensity exercise increase woman's cognitive function and working memory. Also, there were metabolic factors which affect the increase of cognitive function. To moderate intensity exercise, renin-aldosterone and working memory affected to increase of cognitive function. For high intensity exercise, BDNF and working memory affected to it.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.12
• /
• pp.1063-1070
• /
• 2008

The performance of an acoustic transducer is determined by the effects of many design variables, and mostly the influences of these design variables are not linearly independent of each other. To achieve the optimal performance of an acoustic transducer, we must consider the cross-coupled effects of the design variables. In this study, the variation of the performances of underwater acoustic transducer in relation to its structural variables was analyzed. In addition, the new optimal design scheme of an acoustic transducer that could reflect not only individual but also all the cross-coupled effects of multiple structural variables, and could determine the detailed geometry of the transducer with great efficiency and rapidity was developed. The validation of the new optimal design scheme was verified by applying the optimal structure design of a flextensional transducer which are the most common use for high power underwater acoustic transducer. With the finite element analysis(FEA), we analyzed the variation of the resonance frequency, sound pressure, and working depth of a flextensional transducer in relation to its design variables. Through statistical multiple regression analysis of the results, we derived functional forms of the resonance frequency, sound pressure, and working depth in terms of the design variables. By applying the constrained optimization technique, Sequential Quadratic Programming Method of Phenichny and Danilin(SQP-PD), to the derived function, we designed and verified the optimal structure of the Class IV flextensional transducer that could provide the highest sound pressure level and highest working depth at a given operation frequency of 1 kHz.

• Journal of Family Resource Management and Policy Review
• /
• v.15 no.3
• /
• pp.131-151
• /
• 2011

This study attempted to estimate the level of perceived lack of time in Korean society, to link it to time management and to identify the possible association that accounts for time shortage. I employed the gender perspective in order to reveal the dynamics and complexity of the perception of a lack of time in the population. The sample for the study was drawn from the 1999 and 2009 Korean time diary data collected by the Korean National Statistical Office. From the original data, I selected a sample of second shift families(men and women who are presently working and raising children) living in metropolitan areas(including Seoul and six major urban areas in Korea). The dependent variable was time pressure measured by a single-item question on a four-point likert scale. The results of the study showed that working mothers perceived a greater time shortage as compared to working fathers. The time use pattern showed change during the periods, indicating that people worked fewer hours in paid labor and enjoyed more leisure hours and personal care hours. However, on average, people seemed to have experienced a greater time lack in 2009 as compared to 1999. The results from the ordered logistic regression model revealed that even though there were similarities in the impact of relevant factors, men's perception of a lack of time was more closely linked with their work role and social status, while for women, this perception was influenced by work and family duties. This indicates that Korean working mothers and fathers are facing a double jeopardy of time shortage in terms of combining their work and family roles. As a result, the level of time pressure by gender is converging toward a "never enough" phase. These findings generated policy implications and detailed suggestions.

• Structural Engineering and Mechanics
• /
• v.70 no.4
• /
• pp.479-497
• /
• 2019

In the current code design, the use of a uniform internal pressure coefficient of cooling towers as internal suction cannot reflect the 3D characteristics of flow field inside the tower body with different ventilation rate of shutters. Moreover, extreme weather such as heavy rain also has a direct impact on aerodynamic force on the internal surface and changes the turbulence effect of pulsating wind. In this study, the world's tallest cooling tower under construction, which stands 210m, is taken as the research object. The algorithm for two-way coupling between wind and rain is adopted. Simulation of wind field and raindrops is performed iteratively using continuous phase and discrete phase models, respectively, under the general principles of computational fluid dynamics (CFD). Firstly, the rule of influence of 9 combinations of wind speed and rainfall intensity on the volume of wind-driven rain, additional action force of raindrops and equivalent internal pressure coefficient of the tower body is analyzed. The combination of wind velocity and rainfall intensity that is most unfavorable to the cooling tower in terms of distribution of internal pressure coefficient is identified. On this basis, the wind/rain loads, distribution of aerodynamic force and working mechanism of internal pressures of the cooling tower under the most unfavorable working condition are compared between the four ventilation rates of shutters (0%, 15%, 30% and 100%). The results show that the amount of raindrops captured by the internal surface of the tower decreases as the wind velocity increases, and increases along with the rainfall intensity and ventilation rate of the shutters. The maximum value of rain-induced pressure coefficient is 0.013. The research findings lay the basis for determining the precise values of internal surface loads of cooling tower under extreme weather conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07b
• /
• pp.1526-1529
• /
• 2005

Zinc oxide films have been actively investigated as transparent electrode materials for display. We report the effect of the working pressures on electro-optical properties of Al-doped ZnO thin films deposited by d.c. magnetron sputtering. The resistivity of the ZnO thin films was depended on atomic bombardment effect by working pressure.

• Journal of Magnetics
• /
• v.13 no.4
• /
• pp.160-162
• /
• 2008

In this work the magnetic anisotropies of magnetostriction material $Tb(Fe_{0.55}Co_{0.45})_{1.5}$ (named a-TerfecoHan) films were investigated with respect to working pressures in the range 1-7 mTorr. The results obtained show that perpendicular magnetic anisotropy (PMA) can be obtained at a working pressure above 5.1 mTorr. XRD was utilized to clarify the origin of the PMA observed in $Tb(Fe_{0.55}Co_{0.45})_{1.5}$ films, and revealed that all samples were amorphous. Therefore, we propose that the PMA effect is explained by stress produced in film due to internal relaxation process and magnetic anisotropy enhancements caused by magnetoelastic interactions.

• Solar Energy
• /
• v.8 no.2
• /
• pp.26-38
• /
• 1988

If proper design and selection of the working fluid are made the power generation system of temperature difference could achieve more efficient results than others. This paper is to analysis the production of its power generation due to several parameters. Making the power generation system, the characteristics of power output are investigated to obtain its basic data for design. This results of this experiment are as follows. 1. The most proper working fluid in the system is Freon-22 having high stability and difference between the outlet pressure, $P_E$ of evaporator and outlet pressure, $P_c$ of Condenser. 2. With the increase of temperature difference between evaporator and condenser, the output in the system increases linearly. 3. The generation efficiency is largely dependent on the type or form of propeller, nozzle and optimum design of heat exchanger.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1993.10a
• /
• pp.830-839
• /
• 1993

Agricultural hydraulic robot which was reported in Part Ⅰ had been developed . The robot satisfied performance to intend before development. For actual use, however, it have been necessary to reduce manipulator weigh and to simplify construction of hydraulic control valve. Then, working stress of manipulator link and pressure fluctuation of hydraulic circuit were measured. Step and frequency response tests were done subject to amplitude of reference voltage of 0.1 , 0.3 , 0.5 and 1.0v. and delivery pressure of 3.5 and 5.0MPa. Working stress were about 25% comparing with fatigue strength, Thus, mass of manipulator might be reduce to 30 %. In hydraulic control system, virtual natural frequency of 6.5Hz is produced from the combination of drain passage area shortage of servovalve. Further , because of passage area shortage , working pressure at both side of cylinder was acted on. This phenomenon prevent utilize effectively engine power. Then, control valve for new model was p oposed.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.10 no.6
• /
• pp.666-673
• /
• 1998

Solubilities (LiBr+$CaC1_2$) in water were measured at temperatures form 267.51 to 306.17K for $CaC1_2$ (LiBr+$CaC1_2$)=0.24 by mole. Experimental data were correlated with polynomial equations. Average absolute deviations between the measured and calculated values were 0.31% at concentration smaller than 60wt% and 0.41% at concentration larger than 60wt%, respectively. Vapor pressures were measured at temperatures from 296.75 to 436.75K and concentrations from 40 to 70wt%. Vapor pressure data were fitted to a Antoine-type equation and average absolute deviation was 2.98%. The P-T-X chart and H-T-X chart of $H_2O$/(LiBr+$CaC1_2$) system were constructed by using the correlation equations of solubility, vaper pressure, and heat capacity. The P-T-X chart indicates that $H_2O$/(LiBr+$CaC1_2$) system has potential as a possible working fluid for air-cooled absorption chillers.

• Journal of Chest Surgery
• /
• v.21 no.2
• /
• pp.246-253
• /
• 1988

An in vitro model providing with a recirculating perfusion apparatus using an isolated canine heart and its autogenous blood, which was prepared for study of myocardial protection method. This apparatus was easily used by quick connect system and maintained well heart function for about 2 hours. The Langendorff perfusion was initiated for a 10 minute period by introducing perfusate at 37` into the aorta from aortic reservoir located 100 cm above the heart. The isolated perfused working canine heart model was a left heart preparation in which oxygenated perfusion medium [at 37K] entered the cannulated left atrium at a constant flow rate [900ml/ min] under 20 mmHg overflow system and was spontaneously ejected[no electrical pacing] via an cannula against a hydrostatic pressure of 80 cm H2O. During this working period, various indices of cardiac function were measured. The cardiac functions were stable for over 2 hours with perfusion of Krebs-Henseleit solution and autologous blood[1:1] mixture in volume and maintained heart rate ]]3-122/bpm peak systolic pressure 109-113 mmHg, cardiac output 900 ml / min and left atrial mean pressure 8-9 mmHg. In this model, the efficiency of myocardia] protection could be easily measured by means of functional, enzymatic, biochemical and ultrastructural assessment. And also, we believe this model to be a useful assessment screening model of recovery state after long duration of myocardial preservation of donor heart without difficult transplantation procedures.