• Journal of the Korean Magnetics Society
• /
• v.9 no.5
• /
• pp.227-233
• /
• 1999

The magnetic field in single-layer solenoid with multi-current is calculated using Elliptical function, Legendre polynomials and Biot-Savart law. The optimization conditions to a highly uniform magnetic field in the center of solenoid has been studied. The variation of magnetic field depending on radius difference was examined. The uniformity of magnetic field is compared with that obtained each multi-current method. The five-current method increases the working space within 0.02 ppm uniformity by eighty times that using single current method. And this method improves the magnetic field uniformity which is equivalent to the effect of 160 m long solenoid by using single current.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.575-578
• /
• 2000

In this work, all solid-state thin film supercapacitor(TFSC) was fabricated using tungsten trioxide (WO$_3$) with a structure WO$_3$/LiPON/WO$_3$/Pt/TiO$_2$/Si (substrate). After TiO$_2$ was deposited on Si(100) wafer by d.c. reactive sputtering, the Pt current collector films were grown on TiO$_2$glue layer without breaking vacuum by d.c. sputtering. Fabrication conditions of WO$_3$ thin film were such that substrate temperature, working pressure, gas ratio of $O_2$/Ar and r.f. power were room temperature, 5 mTorr, 20% (O$_2$(8sccm)/Ar(32sccm)) and 200W, respectively. LiPON electrolyte film were grown on the WO$_3$ film using r.f. magnetron sputtering at room temperature. The XRD pattern of the as-deposited WO$_3$ thin film were shown no crystalline peak (amorphous). The SEM image of as-deposited WO$_3$ thin film showed that the surface is smooth and uniform. The capacitiy of as-fabricated TFSC was 0$\times$10$^{-2}$ F/$\textrm{cm}^2$-${\mu}{\textrm}{m}$.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.259-262
• /
• 2009

Several universities in Korea are beginning studies related to soft stamping processes but since the studies are done with manual works thus systematic tests can't be performed due to difficulties in producing reproducible and repeatable fine patterns. Therefore, the phenomenon of destruction of the pattern forms of elastic polymers occurred during working because of inconsistent printing pressures and pinting time and there have been difficulties in maintaining flatness or producing uniform and fault-free fine structures in pinting large areas and also, there have been difficulties in multi-layered processes as patterns were changed by contacts in registering and errors in alignments. The purpose of development of this technology is to improve the process of soft lithography so that contacts between PDMS stamps and metal coated substrates in order to develop a stamp printing device that can not only shorten but also optimize processes, secure reproducibility and repeatability and is advantageous in printing large areas. Also, using this technology, this author is to develop equipment technologies and applied technologies for nano grade pattern printing processes with new concepts based on fine contact printing processes in order to apply them to diverse nano pattering processes.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1521-1527
• /
• 2013

This study proposes a wearable master device that can measure the joint stiffness and the angular displacement of a human operator to enhance the adapting capability of a slave system. A lightweight inertial sensor and the exoskeleton mechanism of the master device can make an operator feel comfortable, and artificial pneumatic muscles having a working principle similar to that of human muscles improve the performance of the slave device on emulating what a human operator does. Experimental results revealed that the proposed master/slave system based on the muscle stiffness sensor yielded uniform tracking performance compared with a conventional position-feedback controller when the payload applied to the slave system changed.

• Journal of agriculture & life science
• /
• v.44 no.3
• /
• pp.7-14
• /
• 2010

Alternative subirrigation way, capillary wick system (CWS) was tested to reduce labor cost, waste water, contamination of ground water, and use of fungicide compared to overhead irrigation system (OIS). CWS helped reduce remarkably the working hours for watering from 4 hours in OSI to just 5 minutes. Labor cost was saved 98% in CWS compared to OIS. By the physical characteristics of various growing media, 1 coconut coir+2 perlite (v/v) mixture was selected because it had an ideal distribution of three phase, e.g. 1 solid: 1 liquid: 2 gas phase. Medium mixture containing scoria had so high bulk and particle density to hurt root. In bark-containing medium, the liquid phase and the percent saturation of liquid phase with time elapsed was lower than that of other mixture. It meant that the mixture contained very low level of water. Application of CWS for cyclamen pot production played an important role in reducing the incident of fusarium wilt symptom from 18% in conventional over watering system to 4%. Cyclamen pot irrigated by capillary wick had shorter petiole and more leaves than those by overhead watering. As a result, this system was highly beneficial to get uniform pot products with high quality. It improved water and nutrient solution efficiency relative to conventional overhead irrigation system (OIS).

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.41-48
• /
• 2019

The industrial safety helmets are personal protective equipment (PPE), used to protect the head against falls from a height. This study indicated the necessity of wearing a safety helmet while working at heights below 4 m, through analysis of fall accidents occurring in the industrial field. The stress, displacement, and strain of the safety helmet shell structure have been analyzed using the finite element method with various thicknesses, engineering plastics, and designs. It was preferred that the safety helmet shell structure had a reinforcement frame of uniform thickness in terms of increased impact strength and strain energy absorption rate. The thickness can be reduced to lighten the total weight for workers wearing safety helmets.

• Journal of the Korean Vacuum Society
• /
• v.4 no.S2
• /
• pp.131-138
• /
• 1995

The broad beam ion sources of hot filament plasma type have widely used for modifications of materials and thin films, and the new type intensive current broad beam metal ion source including reactive gaseous ion beams is needed for preparing the hard coating films such as DLC, $\beta-C_3N_4$ Carbides, Nitrides, Borides etc. Now a electorn beam evaporation(EBE) broad beam metal ion source has been developed for this purpose in our lab. CN film has been formed by the EBE ion source. Study of the CN film shows that it has high hardness(HK=5800kgf/$\textrm {mm}^2$)and good adhesion. This method can widely changes the ratio of C/N atom's concentrations from 0.14 to 0.6 and has high coating rate. The low energy pocket ion source which was specially designed for surface texturing of medical silicon rubber was also developed. It has high efficiency and large uniform working zone. Both nature texturing and mesh masked texturing of silicon rubbers were performed. The biocompatibility was tested by culture of monocytes, and the results showed improved biocompatibility for the treated silicon rubbers. In addition, the TiB2 film synthesized by IBED is being studied recently in our lab. In this paper, the results which include the hardness, thickness of the films and the AES, XRD analysis as well as the tests of the oxidation of high temperature and erosion will be presented.

• Journal of the Korean Society of Costume
• /
• v.1
• /
• pp.101-117
• /
• 1977

This thesis is a study of the Simui(深衣) system which was a dress regulation peculiar to old China with skirt and coat. The origin of Simui is a very long time, that is, before Ju dynasty in China. Its wearing range had a large circle irrespective of rank and good or bad luck. This was a ordinary dress to the Emperor or the lords, a below court attire or a below sacrificial rites attire to the illustrious officials, and good luck dress to the common people. But this was a funeral rites attire or coming-of-age ceremony attire in domestic behaviour. In the times of Song dynasty, lots of confucian scholars had put on this simui because of Juhi's recommendation for domestic behaviour. This Simui had been put on through all the times of China and was the original text of all the dress. Especially the court attire and silkworm working dress of Empress, and the court attire and underwear court attire of Emperor is also made out of this Simui, therefore this is a origin of the ceremonial dress which formed into long coat. In Korea it is said that this Simui was brought in prior to the middle of Goryeo dynasty. But we can't tell the correct transmitted age. According to the following records in Goryeo History, "King had put on the Simui as a sacrificial rite attire in the times of Yejong". It is sure that this Simui was brought in prior to the times of Yejong. In fact, lots of confucian scholars had put on the Simui since the introduction of confucianism in the end of Goryeo dynasty and after that time this was taken by many confucian scholars through Yi dynasty. Korean Simui system was complied with Chinese system through confucian domestic behaviour, This was respected for court dress of confucian scholars, as it were, Chumri, (an ordinary dress of scholars), Nansam (a uniform of upper student), and Hakchangui (a uniform of confucian student). There are many deta about Simui system in the book of Yeki, chapter Okcho and Simui, and other many canfucian books. But we didn't demonstrate the theory about it till now. Especially there are diversifies of opinions about the phrase of "Sok Im Ku Byun" in Yeki. Simui was cut in separate and then was stitched together in one piece. Generally its shape had round sleeve and angled lapel, its length reaches to the anklebone. And it has a line around the lapel, the sleeve band, and the edge of skirt. It is called Simui because the body can be wrapped deeply in broad width and large sleeve. The Simui was made of white fine linen and was cut by the natural size of body. Every part of Simui had a profound meaning; the round sleeve in compliance with regulation can keep a courtesy when a walker moves his hands and the angled lapel like a carpenter's square in compliance with square keeps them front loosing their Justice and a string of the back also keeps them loosing from their righteousness and the flat lower part of Simui makes their heart and mind calm. This Simui was usually attendant on a head cover and belt made cloth, and black shoes. This thesis was made a study of documents and portrait from Yi dynasty, for the actual object was not obtained.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.9
• /
• pp.1-7
• /
• 2008

This study is intended to compare physical properties of fluorescent luminaires with ones of LED luminaires so as to analyze fundamental characteristics of LED luminaires. For this, a comparative analysis of uniformity ratio of illuminance and luminance distribution of these two luminaires was made, and materials for applying LED luminaires to interior construction space were prepared. This study was carried out in four stages. First, a theoretical review on LED illumination light source was made compared with the existing luminaires. Second, a mock-up to control experimental variables to meet the objective of this study was manufactured. Third uniformity ratio of illuminance and luminance distribution of each luminaire were measured by using the mock-up. Fourth, a comparative analysis of uniformity ratio of illuminance and characteristics of luminance distribution of the existing fluorescent luminaires and LED ones was made. As a result of the study, the uniformity ratio of illuminance of LED luminaires, 0.559, was higher than one of the existing fluorescent luminaires, 0.522. Namely, it was shown that illuminance distribution of LED luminaires was uniform and global diffuse was good. As a result of measuring luminance distribution, it was found that luminance distribution of LED luminaires was more uniform than one of the existing fluorescent luminaires. The maximum luminance of fluorescent luminaires and LED luminaires over the wall was $180.6[cd/m^2]$ and $155.26[cd/m^2]$ respectively. Namely, the maximum luminance of fluorescent luminaires was higher than one of LED luminaires. The average luminance of fluorescent luminaires and LED luminaires was $44.32[cd/m^2]$ and $58.65[cd/m^2]$. Like this, the average luminance of LED luminaires was higher than one of fluorescent luminaires. Considering these results, it's thought that LED luminaires can give a person in the room a more comfortable working environment than fluorescent luminaires.

• Journal of Korean Society of Forest Science
• /
• v.64 no.1
• /
• pp.42-46
• /
• 1984

This study was carried out to obtain the advanced basic data for hillside erosion control works. Recovery of vegetation in the hillside erosion control districts depends on various factors i.e., topographies, soil qualities, rain conditions and erosion control methods. The only relations between topographies and vegetation coverage were surveyed, since the other factors were equal in all those surveyed areas. The results obtained are summarized as follows; 1) Mean coverage values were decreased in order of 80%, 78.7%, 64.0% and 56.5%r in concave slope, uniform slope, compound slope and convex slope respectively. The mean coverage of all aspects was 69.8%. The slope pattern have a influence on formation of coverage. 2) Moisture ratio in soil and mean slope have an effect on the mean coverage value. 3) In the beginning of the hillside erosion control working, coverage (14.8%) by arbor species was too low comparing with that by herb. 4) It is more desirable to recover regetation by artificial planting or seed planting than by the natural vegetation in the barren hillside. In the beginning of the hillside erosion control working, it is difficult to expect vegetation recovery by natural species.