• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.88-95
• /
• 2007

In this paper, the authors discussed the overview of a method for estimating working area for development of a monitoring system for labor management using RFID technology. RSSI (Receive Signal Strength Indication) data of RFID tag was obtained from readers set around the indoor space. An estimating model of the working area was prepared. The model had a range of the percentage of correctly classified from 61% to 95%. According to the result, the possibility of the monitoring system and the factors necessary to develop for practical were proposed.

• 지역사회간호학회지
• /
• 제31권3호
• /
• pp.223-233
• /
• 2020

Purpose: The purpose of this study was to construct a model that describes the health related quality of life in working women with preschool children and to verify the goodness of fitness of the model. Methods: The data were collected with a structured self-report questionnaire from 483 working women with preschool children. Results: The modified model showed a reasonable fitness to the data. Social support, job satisfaction, parenting stress, sense of coherence and depression accounted for 78% of the health related quality of life in working women with preschool children. Conclusion: This study suggests that the health related quality of life in working women with preschool children can be improved by reducing parenting stress and depression level, and by increasing social support, job satisfaction, and sense of coherence. Depression can also be managed by reducing parenting stress and by increasing job satisfaction and sense of coherence. Based on the results of this study, it is necessary to develop intervention programs to increase the health related quality of life or to decrease depression in working women.

• 한국경영과학회지
• /
• 제14권2호
• /
• pp.105-114
• /
• 1989

The actual working time of jobs, in general, is different to the standard time of jobs. In this paper, in order to analyze the actual working time of each job in production, we use the total production amount and the encessary total working time. The method which analyzes the actual working time is as follows. In this paper, we propose the interval regression analysis for obtaining an interval linear regression model with constraint conditions with respect to interval parameters. The merits of this method are the following.1) it is easy to obtain an interval linear model by solving a LP problem to which the formulation of proposed regression analysis is reduced, 2) it is easy to add constraint conditions about interval parameters, which are a sort of expert knowledge. As an application, within a case which has given certain data, the actual working time of jobs and the number of workers in a future plan are estimated through the real data obtianed from the operation of processing line in a heavy industry company. It results from the proposed method that the actual working time and the number of workers can be estimated as intervals by the interval regression model.

• 디지털융복합연구
• /
• 제12권6호
• /
• pp.265-270
• /
• 2014

ONE 시뮬레이터로 구현된 근무일 이동 모델은 교통수단을 이용하여 실제와 비슷한 환경을 제공한다. 하지만, 근무일 이동 모델은 교통수단 중에 택시 이동 모델은 누락되어 있다. 그래서 선행 연구로 택시 이동 모델을 ONE 시뮬레이터로 구현하였다. ONE 시뮬레이터 안에서 라우팅 프로토콜의 실험결과는 이동 모델에 따라 크게 달라진다. 그래서 본 논문에서는 ONE 시뮬레이터에 택시 이동 모델을 이용하였을 때, 전염 라우팅 프로토콜과 같은 DTN 라우팅 프로토콜의 성능 평가 결과를 분석한다.

• Clinical Psychopharmacology and Neuroscience
• /
• 제16권4호
• /
• pp.489-493
• /
• 2018

Objective: This study was to identify whether working memory (WM) can be clearly subdivided according to auditory and visual modality. To do this, we administered the most recent and universal clinical WM measures in a mixed psychiatric sample. Methods: A total of 115 patients were diagnosed on the basis of DSM-IV diagnostic criteria and with MINI-Plus 5.0, a structured diagnostic interview. WM subtests of Korean version of Wechsler Adult Intelligence Scale-IV and Korean version of Wechsler Memory Scale-IV were administered to assess WM. Confirmatory factor analysis (CFA) was used to observe whether WM measures fit better to a one-factor or two-factor model. Results: CFA results demonstrated that a two factor model fits the data better than one-factor model as expected. Conclusion: Our study supports a modality model of WM, or the existence of modality-specific WM systems, and thus poses a clinical significance of assessing both auditory and visual WM tests.

• 대한인간공학회지
• /
• 제31권3호
• /
• pp.437-444
• /
• 2012

The purpose of this study was to suggest appropriate human model for ergonomic evaluation considering working postures on 3D space. Background: Traditionally extreme design rules have been widely utilized at the stage of designing products. Body size of 5th percentile and 95th percentile in stature has been generally selected for controllability and clearance evaluation, respectively. However, these rules had limitations in reflecting working posture in ergonomic evaluation. Method: In order to define working posture on 3D space, not only sagittal plane but also lateral plane was considered. Kinematic linkage body model was utilized for representation of working posture. By utilizing the anthropometric data of 2,836 South Korean male populations, the point cloud for end points of linkage models was derived. The individuals who were lacking in certain controllability were selected as human models for the evaluation. Result: In case of standing posture it was found that conventional approach is proper for all controllability evaluations. Contrary to standing posture, tall people had less controllability on control location below shoulder point in sitting posture. Conclusion: From the derived proper range on controllability, ergonomic evaluation rule was suggested according to working posture especially in standing and sitting. Application: The results of the study are expected to aid in selection of appropriate human model for ergonomic evaluation and to improve the usability of products and work space.

• 지역연구
• /
• 제37권1호
• /
• pp.15-27
• /
• 2021

연구는 근로빈곤층과 근로비빈곤층의 차별적 소득 궤적을 잠재성장모형을 이용하여 실증하고, 이를 인구·사회학적 요인(결혼, 교육수준)과 지역적 요인(대도시 거주)으로 설명하고자 한다. 『한국노동패널조사』 12~21차(2009~2018년) 자료를 이용하여 분석한 결과에 따르면, 이차함수형 궤적으로 추정한 근로빈곤층과 근로비빈곤층의 소득은 통계적으로 유의한 집단 간 차이를 보였다. 2009년에서 2016년까지 근로빈곤층의 소득이 근로비빈곤층에 비해 빠르게 증가하면서 격차가 완화되었지만, 이후 근로빈곤층의 소득이 정체되면서 다시 격차가 심화되었다. 소득 궤적(시작점의 소득 수준과 증가율)에 결혼, 교육수준, 대도시 거주가 미친 영향은 집단 간 차이를 보였는데, 이 요인들은 근로빈곤층의 궤적을 더욱 잘 설명하고 있다. 결과에서 특히 주목할 점은 근로빈곤층의 소득변화율과 대도시 거주 여부의 정(+)적 연관성으로, 대도시에 거주하는 것이 근로빈곤층에 경제적 프리미엄으로 작용할 가능성을 시사한다. 향후 근로빈곤층의 도시 프리미엄과 관련한 후속 연구가 수행될 필요성을 제기한다.

• 한국중재학회지:중재연구
• /
• 제14권2호
• /
• pp.73-106
• /
• 2004

The UNCITRAL Arbitration Working Group began its deliberations on the topic of interim measures of protection at its thirty-second session (Vienna, 21-30 March 2000), when the Working Group expressed general support for a legal regime governing enforcement of interim measures of protection ordered by the arbitral tribunal. Also the Working Group took a preliminary analysis of whether there was a need for a uniform rule on court-ordered interim measures of protection in support of arbitration. The Working Group agreed, at its thirty-third session (Vienna, 20 November-1 December 2000), that the proposed new article to the UNCITRAL Model Law on International Commercial Arbitration on enforcement of interim measures of protection (tentatively numbered article 17 bis) should include an obligation on courts to enforce interim measures if prescribed conditions were met. At its thirty-fourth session (New York, 21 May-1 Jun 2001), in addition to continuing its review of draft article 17 bis, the Working Group proceeded to consider a text revising article 17 of the UNCITRAL Model Law, which defined the scope of an arbitral tribunal's power to order interim measures and included an additional provision on the granting of interim measures on an ex parte basis. Discussions in relation to revised drafts of article 17 and 17 bis of the UNCITRAL Model Law have continued at the fortieth session ( New York, 23-27 February 2004). Article 17 of the UNCITRAL Model Law provides that the arbitral tribunal may order any party to take such interim measure of protection as the arbitral tribunal may consider necessary in respect to the subject matter of the dispute. However it may be noted that the article does not deal with enforcement of such measures.

• 산업노동연구
• /
• 제19권1호
• /
• pp.35-64
• /
• 2013

본 논문은 최저임금 상승의 근로빈곤 완화효과를 실증적으로 분석한 논문이다. 이러한 목적을 위해서 근로빈곤지위에서 근로비빈곤으로 이행하는지, 혹은 실업 및 비경활상태로 이행하는지를 한국노동패널자료를 이용하여 분석하였다. 본 연구는 개인의 미관찰 이질적 특성을 통제한 다수준 다항로짓모형을 활용하였다. 분석결과를 보면 최저임금 상승은 근로빈곤에서 근로비빈곤의 이행 가능성을 높이는 것으로 나타났다. 반면 최저임금 상승과 고용지위 유지와는 별 상관관계가 없는 것으로 나타났다. 결과적으로 최저임금의 상승은 근로빈곤의 상태를 개선하는데 효과적인 것으로 파악되었다.

• 한국건설관리학회논문집
• /
• 제24권6호
• /
• pp.81-90
• /
• 2023

Climate change has resulted in increased frequency and intensity of heat waves, which poses a significant threat to the health and safety of construction workers, particularly those engaged in labor-intensive and heat-stress vulnerable working environments. To address this challenge, this study aimed to propose an interpretable machine learning approach for forecasting personal heat strain by considering the cumulative effect of heat exposure as a situational variable, which has not been taken into account in the existing approach. As a result, the proposed model, which incorporated the cumulative working time along with environmental and personal variables, was found to have superior forecast performance and explanatory power. Specifically, the proposed Multi-Layer Perceptron (MLP) model achieved a Mean Absolute Error (MAE) of 0.034 (℃) and an R-squared of 99.3% (0.933). Feature importance analysis revealed that the cumulative working time, as a situational variable, had the most significant impact on personal heat strain. These findings highlight the importance of systematic management of personal heat strain at construction sites by comprehensively considering the cumulative working time as a situational variable as well as environmental and personal variables. This study provided a valuable contribution to the construction industry by offering a reliable and accurate heat strain forecasting model, enhancing the health and safety of construction workers.