• Journal of the Semiconductor & Display Technology
• /
• v.6 no.3
• /
• pp.35-39
• /
• 2007

ITO(Indium Tin Oxide) is the most attractive TCO(Transparent Conducting Oxide) materials for LCD, PDP, OLEDs and solar cell, because of their high optical transparency and electrical conductivity. However due to the shortage of indium resource, hard processing at low temperature, and decrease of optical property during hydrogen plasma treatment, their applications to the display industries are limited. Thus, recently the Al-doped ZnO(AZO) has been studied to substitute ITO. In this study, we have investigated the effect of different substrate temperature(RT, $150^{\circ}C$, $225^{\circ}C$, $300^{\circ}C$) and working pressure(10 mTorr, 20 mTorr, 30 mTorr, 80 mTorr) on the characteristics of AZO(2 wt.% Al, 98 wt.% ZnO) films deposited by RF-magnetron sputtering. We have obtained AZO thin films deposited at low temperature and all the deposited AZO thin films are grown as colunmar. The average transmittance in the visible wavelength region is over 80% for all the films and transmittance improved with increasing substrate temperature. Electrical properties of the AZO films improved with increasing substrate temperature.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1545-1553
• /
• 2012

Good salespeople are the deciding factors in the success of an organization. In particular, the role of the salesperson takes on a more important role. Accordingly, the first purpose of this study is to understand the personal values of salespeople; secondly, to study the explanation personal values, adaptability, and customer orientation have on salesperson's performance. The third purpose is to understand the structural link among each of the explanatory factors related to salesperson performance. Lastly, with these research results as a foundation, to find the implications regarding management strategy plans of valuable salespeople for marketing researchers and sales managers.

• Culinary science and hospitality research
• /
• v.7 no.2
• /
• pp.195-215
• /
• 2001

This study is of an analysis of the kinds of influences on the subordinate variables through the adjusting variables by the independent variables which serve as the perception factor of job stress. also This study, with taking the workers for the hotel employees who are in the room, food & beverage and cook, was carried out so as to analyze deeply and throughly the stress of work they experience in doing their job and the tension incited from this stress and the strategy used for meeting this stress to grope for raising plan for the degree of satisfaction with their job of the workers for the hotel. In order for, this study ran paralled with literature study and research study, taking 615 workers who are now working in hotel. Job stress is easily negligible in hotel business not only because it is hard to identify and measure its concrete entity on account of its intangible characteristic but also because it is impossible to check physically the relationship with each direct behavior. If job stress continue, however, it can cause neglect of duty, change of occupation, deterioration of service quality and eventually aggravate the cost of a hotel business and decrease the hotel sales. Consequently, it is highly necessary to increase job satisfaction by identifying systematically and eliminating the stress factor of hotel employees in order to accomplish particularly experience unique job stress in the course of contact since they should provide the customer with their services.

• Journal of Fashion Business
• /
• v.23 no.6
• /
• pp.76-85
• /
• 2019

is based on a true story of the first transgender individual. It portrays psychological changes visually during the protagonist's confusion with self-identity based on gender. This study analyzes gender identity in contemporary fashion intensively based on gender images and costumes appearing in the film . In the society lacking a fixed gender image, this study provides a timely insight into gender identities by analyzing the fashions depicted in the movie. The movie is a true story of the first transgender person working hard to determine his or her own gender identity. As a research method, the theoretical basis of genderless approach was established via literature review. The characteristics of genderless identity were determined by dividing the movie into established and ambiguous gender periods to analyze the comprehensive changes in costumes for comparison. Einer Wagner representing male identity portrays men's fashion whereas Lily Elbe representing female identity depicts women's fashion. While the two different genders find their places in a single body, the confusion creates genderless fashion. By dividing these phases into femininity, masculinity and genderless categories, each costume was analyzed comprehensively, and the images of relatively changing fashion were studied by altering the gender identity. Four characteristics including androgyne, rebellion, pleasure and balance were derived from the gender identity based on Fashion in .

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.53 no.5
• /
• pp.345-352
• /
• 2004

Currently, high data rate PLC(Power Line Communications), up to 100 Mbps, which use frequency bandwidth between 2 MHz and 30 MHz is investigated very hard, and commercial PLC modem for low voltage powerline network (indoor) is coming soon into communication market. For the purpose of developing a fit communication system which has little distortion of signal and attenuation, it is surely necessary to know about channel environments of powerline. Especially, the impedance measurement of the powerline and impedance matching are very important. As is known, since medium-voltage powerline (22.9 ㎸) is still working, it is not so simple to measure the powerline impedance. In our study, a portable impedance measurement equipment is developed. It consists of coupling capacitor, a drain coil and impedance matching transformer. The equipment is easily connected to medium voltage line and impedance of power line is measured using a network analyzer. Also, measurement results are used for impedance matching of PLC signal. In fact, matching transformer with several different impedances are used. The matching transformer is connected between coupling capacitor and signal port. In this paper, the developed portable impedance measurement equipment and impedance measurement results are presented. Also impedance matching technique using matching transformers will be explained. We showed the result of the improved performance by the impedance matching.

• Journal of the Korean Ceramic Society
• /
• v.37 no.8
• /
• pp.731-738
• /
• 2000

KLN(K3Li2Nb5O15) has attracted a great deal of attention for their potential usefulness in piezoelectric, electro-optic, nonlinear optic, and pyroelectirc devices. Especially, the KLN single crystal has been studied in the field of optics and electronics. However it is hard to produce good quality single crystals due to the crack propagation during crystal growing. One of the solutions of this problem is prepartion of thin film. But the intensive study has not been conducted so far. In this study, after the KLN thin film were prepared by R.F. magnetron Sputtering method on SiO2/Si substrate, the post-annealing methods of RTA(rapid thermal annealin) and IPA(insitu post annealing) were employed. The deposition condition of KLN thin film was RF power(100 W), Working pressure(100 mtorr). The commonness of both RAT and IPA was that the higher were deposition and post annealing temperature, the higher was the intensity of XRD but the less surface roughness. The difference of post-annealing methods affected XRD phase and surface condition very much. And in IPA process, the influence of O2 had much effect on the formation of KLN phase.

• Journal of Environmental Impact Assessment
• /
• v.11 no.1
• /
• pp.37-49
• /
• 2002

The opinionnaire was given to two groups; residents and public officials working at environmental administrative section. Based on the result of questionnaire, perceptional differences between these groups toward environmental NGOs were comparatively anaIyzed. The results were classified into following four items; Firstly, numbers of residents who recognize the existences of environmental NGOs in Kyonggi-Do were lower than those who didn't. Secondly, in both groups, more than 80% of respondents acknowledged that residents should be involved in decisions and developments of environmental projects. Thirdly, respondents belonging to both groups overwhelmingly selected the item "being improved" as the answer for the question asking whether NGOs' environmental activities contribute to improve of environmental conditions. This indicated that public officials also acknowledged the positive role of NGOs in environmental issues. Lastly, the answer of "intensive upbringing is necessary" was ranked as the first place for the question asking "necessity of raising environmental NGOs". However, it was hard to tell which opinion was superior in the matter of financial support necessity for NGOs judging from the answers by respondents of public officials.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2018.10a
• /
• pp.346-349
• /
• 2018

In North-East asian countries, laver cultivation has been an important marine industry in coastal areas as well as fishery because laver (Porphyra) is nutrient-rich food and has been used in many Asian cuisines. Laver is characterized by high concentrations of fiber and minerals, a low fat content, and, in some cases, relatively high protein levels. In this paper we inplimented design of fully automatic laver harvesting, nowdays most peoples are used to collect a laver harvesting by human, it is very defficult working, due to wind, waves, and the weather conditions which is hard to stand on the ship and holding the seaweed nets it can be injurced human, this is the reason to we are developed automatic harvesting method, in this project we proposed automatic harvesting collect method which is operated without human. Mainly we design and developed automated ship, This ship is devided in to three parts frist part is supporting roller, second part is drum screener, thried part is lifting mechanism. Thise are operated with hydro pnumatic equimpment, this divice are control with micro controller. The system prototype has implemented and satisfied by the performance to realize the further level.

• Journal of Veterinary Clinics
• /
• v.24 no.2
• /
• pp.264-268
• /
• 2007

Three German Shepherd dogs (5 years old, 30 kg, male; 4 years old, 23 kg, female; 4 years old, 24 kg, female) with history of acute vomiting, hemorrhagic diarrhea, anorexia and dullness were admitted to veterinary clinic in the military working dogs training corp (MWDTC). All of them showed same symptoms after ingestion the $'PREVNTIC^{(R)}'$ collar to control ecto-parasites infection in field. One dog was operated by gastrotomy and the $5{\sim}6$ pieces of the $'PREVNTIC^{(R)}'$ collar were removed. The dog was completely cured by intensive care within 2 hours after $'PREVNTIC^{(R)}'$ collar ingestion. However, two dogs were operated by gastrotomy and intensive care over 24 hours after $'PREVNTIC^{(R)}'$ collar ingestion but died. In autopsy, the $5{\sim}6$ pieces of hard materials were found in the stomach, and severe thickness, congestion hemorrhage and swelling of the stomach walls and mucous membrane were observed. In these cases, it was suggested that the first aid of treatment such as gastrotomy within two hours after $'PREVNTIC^{(R)}'$ collar ingestion as soon as possible was helpful for attenuating of toxicosis.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.3
• /
• pp.95-104
• /
• 2019

Crowdsourcing is growing its interests in designing where various designers work independently to a given design task. Recent researchers discovered that collaboration by sharing designs among designers helps to produce high-quality designs. However, design task may still be hard even with that collaboration in case the requirements are not well-defined. Most customers sometimes do not know what they really want and do not know how to clearly define the requirements. Consequently, the lack of requirements creates issues on designers, such as spending much time and effort on collecting requirements alone or from the customers. The designers even end up missing important necessities to complete their tasks. To address this issue, we proposed a collaborative requirements elicitation method that supports designers who are working on the same task. We developed CREFD (Collaborative Requirements Elicitation For Designers and Developers) tool to enable designers collaboratively provide requirements, identify dependencies, add annotations and votes to the provided requirements. We performed the hypothetical and empirical evaluations to test and compare the proposed method with one of the existing elicitation methods, the results show that the proposed method helps in collecting accepted and well-organized requirements better than individual requirements elicitation.