• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.26 no.8
• /
• pp.1172-1182
• /
• 2002

In the present study a general criterion for local thermal equilibrium is presented in terms of parameters of engineering importance which include the Darcy number, the effective Prandtl number of fluid, and the Reynolds number. For this, an order of magnitude analysis is performed for the case when the effect of convection heat transfer is dominant in a porous structure. The criterion proposed in this study is more general than the previous criterion suggested by Carbonell and Whitaker, because the latter is applicable only when conduction is the dominant heat transfer mode in a porous medium while the former can be applied even when convection heat transfer prevails. In order to check the validity of the proposed criterion for local thermal equilibrium, the forced convection phenomena in a porous medium with a microchanneled structure subject to an impinging jet are studied using a similarity transformation. The proposed criterion is also validated with the existing experimental and numerical results for convection heat transfer in various porous materials that include some of the parameters used in the criterion such as a microchannel heat sink with a parallel flow, a packed bed, a cellular ceramic, and a sintered metal. It is shown that the criterion presented in this work well-predicts the validity of the assumption of local thermal equilibrium in a porous medium.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.20 no.12
• /
• pp.802-807
• /
• 2008

A Study on Typical Rates of Water-use for School Facilities has been carried out in this work. Water supply system is given much weight in school facilities. Therefore, it set up a basis efficiency using of water sources to calculate typical rates of water use. The results are summarized as follows; 1) On the whole, typical rates of water-use was founded out 15 L/stu. d in pirmary school, 10 L/stu. d in middle school and 30 L/stu. d in high school smaller than the existing it. It was rate of water-use change as season and Max. Rates of water-use was July. 2) I deem that school hours are 5 hour's in primary school, 7 hour's in middle school and 8 hour's in high school. It the concept of 1 hour that is lesson time 40 minutes and resting time 10 minutes in primary school, lesson time 45 minutes and resting time 10 minutes in middle school and lesson time 50 minutes and resting time 10 minutes in high school. 3) It is desired that we calculate the volume of pump and water tank throughout this concept and the size of water tank should be 1.5 times with taking peak load into consideration by this study on typical rate of water-use. 4) The amount of using water increases in gradually and I consider the life cycle of facilities is more than 10 years. As a result, I can forecast that the size will be insufficiency but I deem that if we devise a plan about parallel pumping on water tank space, we can cope with it. Also, it is expected that we can cut back the transport energy by controlling pump volume.

• Proceedings of the SAREK Conference
• /
• 2007.11a
• /
• pp.510-515
• /
• 2007

A Study on Typical Rates of Water-use for School Facilities has been carried out in this work. Water supply system is given much weight in school facilities. Therefore, it set up a basis efficiency using of water sources to calculate typical rates of water use. The results are summarized as follows ; 1) On the whole, typical rates of water-use was founded out 15 L / stu. d in pirmary school, 10 L / stu. d in middle school and 30L / stu. d in high school smaller than the existing it. It was rate of water-use change as season and Max. Rates of water-use was July. 2) I deem that school hours are 5 hour's in primary school, 7 hour's in middle school and 8 hour's in high school. It the concept of 1 hour that is lesson time 40 minutes and resting time 10 minutes in primary school, lesson time 45 minutes and resting time 10 minutes in middle school and lesson time 50 minutes and resting time 10 minutes in high school. 3) It is desired that we calculate the volume of pump and water tank throughout this concept and the size of water tank should be 1.5 times with taking pick load into consideration by this study on typical rate of water-use. 4) The amount of using water increases in gradually and I consider the life cycle of facilities is more than 10 years. As a result, I can forecast that the size will be insufficiency but I deem that if we devise a plan about parallel pumping on water tank space, we can cope with it. Also, it is expected that we can cut back the transport energy by controlling pump volume.

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.2
• /
• pp.157-167
• /
• 2015

There is literature addressing to cultural aspects of alcohol and alcoholism. However, scholars have paid little attention to study what will happen to alcohol consumption behavior and alcoholism if there is a national government cultural intervention, so that the alcohol drinking culture would change in association with the change of internal institution in a society. This work attempted to study this research question. For this purpose, I selected Mongolia as a research case and examined survey data, statistical data, and data from research-based resources, referring to the last 70 years profile of Mongolian alcohol per capital consumption and alcoholism as well as studying Mongolian historical sources for measuring Mongolian traditional alcohol drinking customs. The data I gathered and observed during this research proved that there is a huge difference between the current drinking culture among younger generation and Mongolian traditional cultural context that was respected and strictly followed by their ancestors. Findings suggest that there has been a parallel increase between the change of alcohol drinking culture and alcohol consumption in connection with the modernization.

• Journal of Practical Engineering Education
• /
• v.15 no.2
• /
• pp.259-271
• /
• 2023

The purpose of this study is to prepare a plan to activate vocational training through a company-customized qualification system that meets the needs of the industry and responds promptly to changes in the external environment and trends. The BRIDGE 3.0 model was presented as Establishment of qualification system based on education and training result certification, a customized qualification operation system based on local companies by setting the qualification system as a strategy centered on companies that are consumers. To this end, the current status and limitations of vocational competency development projects, the current status and limitations of the domestic qualification system, government policies related to vocational competency development, FGI of corporate personnel managers, surveys of personnel managers of SME, expert advice.

• Journal of Fisheries and Marine Sciences Education
• /
• v.28 no.2
• /
• pp.539-549
• /
• 2016

This study analyzed ship's passing characteristics in relation with incoming and outgoing routes in Yeosu Gwangyang Port, and examined the risk factors and measures for safety management of marine traffic. The number of passing ships in Yeosu Gwangyang Port was about 60,000 ships annually based on 2014, and the tonnage rose 73% from 447,000 thousand tons in 2005 to 770,000 thousand tons in 2014. Actually, the number of large passing ships was revealed to enormously increase. As a result of marine traffic survey in Yeosu Gwangyang Port for three days in August 2015, daily average passing ships were 408 ships, and 77% of the total passing ships passed between 04:00 and 20:00. The chemical ships and general cargo ships took up the most at 58% of the total incoming and outgoing ships, followed by other work ships at 21%, tankers at 8%, fishing vessels at 7.5% and container ships at 5.5%. Concerning the size of passing ships, ships less than 1,000 tons accounted for 58.6% of the total passing ships. Ships of 1,000-5,000 tons were 20.1%, and those of 5,000-10,000 tons were 6.8%, and more than 10,000 tons were 14.4%. Especially, ships of 500 tons and less using mainly coastal passing routes took up 49% of the total passing ships. As for ship's passage ratio by route, Nakpo sea area where many routes meet accounted for 27.2%, specified area 49%, costal route 8%, specified area's incoming and outgoing sea area around Daedo 4.5%, and Dolsan coastal ara and Kumhodo sea area 8.5%. The number of ships standing by for anchoring in the six designated anchorages was 230 for three days. The standby rate for anchoring was 25% based on the specified area passing ships. In Nakpo sea area, where many routes meet, parallel passing and cross passing between ships occurred the most frequently. In the specified area, many cases, in which incoming and outgoing cargo ships at the starting and ending parts and incoming and outgoing work ships and fishing vessels at the coastal routes cross, took place. Consequently, the following measures are urgently needed: active passing management in the Nakpo sea area, where passing routes are complex, specified areas and costal traffic routes, the elimination of rocks in the route close to Myodo, an effort to improve routes including shallow depth area dredging, and rational safety management for small work ships frequently incoming and outgoing the passing routes of large ships, and fishing vessels operated in the sea areas around those passing routes.

• Journal of Practical Engineering Education
• /
• v.5 no.2
• /
• pp.139-149
• /
• 2013

In this paper, we proposed a new Korean Dual system, K-Dual System, and discussed the concepts and details about three sub-models of the system, IPP, W3 and corporate university models. Propose K-Dual system is a new and unique educational model that combines academic study and industrial work in order to solve the various problems of existing work-study parallel educational systems in Korea. K-Dual System has two tracks, Academic and Vocational tracks. Academic track has a long-term field experience training program, IPP program. On the other hands, Vocational track can be divided into two sub-models and those are $W^3$ and corporate university. Finally, we summarized several key points for the successful setup and operation of K-Dual system.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.3 s.33
• /
• pp.69-77
• /
• 2005

Most of the evaluations of environmental effect of construction of road do not run parallel with the evaluation of the propriety of the business, but it just reviews how to reduce contamination before the beginning of the construction work. This reveals the limitation of the induction of environment friendly development from the fundamental. In this study, a function of GIS spatial analysis for 9 elements of pre-evaluation of environmental effect has been introduced, and a GIS decision making system for environmental effect of a road has been established for an integrated evaluation by using individual evaluation result. By using GIS decision making system for pre-evaluation of environmental effect that has been developed in this study and the GIS data that has been collected, it would be possible to decrease time and money for evaluation as well as fulfill the requirement of objectivity. Therefore, it would be possible to apply for pre-evaluation of environmental effect when deciding on the route of the road at the beginning stage of the construction work. Also, through the system developed in this study, the construction body could easily induce a mutual agreement with the residents by the visual evaluation material, which might result in an evaluation of environmental effect while decreasing time and money at the beginning stage of the construction.

• Korean Journal of Family Social Work
• /
• no.62
• /
• pp.103-139
• /
• 2018

The purpose of this study was to explore the social workers' reflections developed during the participatory action research seeking practice methods in the community welfare center single parent self-help groups. Nine social workers and researchers sharing difficulties in the community welfare center single parent self-help group practice were involved in the participatory action research. We performed a circulatory research repeating 'plan-action-reflection-replan' cycles through ten sessions of research meetings including peer supervision in parallel with 4 self-help group practices. Multiple practice methods were derived as the result among which change in the social workers' perception was the key. We focused on the result that the social workers' perception was changed by reflections from participatory action research and the contents of the reflections were qualitatively analyzed using materials acquired during the study. As a result the following 5 themes were derived; 'recognition and worry on the lack of appropriate practice for the self-help group', 'specification of the social workers' role based on the changed perspective on the member-social worker relation', 'confirmation of the possibility of the concerned person initiated practice', 'detailed understanding of the single parent self-help group in the community welfare center', and 'renewed recognition of the development of the single parent self-help group in the community welfare center'. Based on these results, empowerment and reflection/reflective practice for single parent self-help group in the community welfare center were discussed.

• Journal of Biosystems Engineering
• /
• v.33 no.6
• /
• pp.453-461
• /
• 2008

This study was conducted to develop a root-removed splice grafting system for cucurbitaceous vegetables, mainly watermelon and cucumber seedlings, for the seedlings factories where currently most of seedlings grafting works are carried out by manual works. The major results of the study are as follows. The dimensions of rootstocks and scions, except cotyledon width, of root- removed splice grafting of watermelon and cucumber were shown to be varied within the 2.5-fold range. The growth status of seedlings were not consistent in terms of cotyledon sprouting direction and angle which were considered as one of the important factors for in root-removed splice grafting. The grafting work of root-removed splice for grafted watermelon and cucumber could be divided by four sub-operations: seedling supplying, cutting, clipping and potting, while a part or all root of the rootstock was removed in the seedlings supplying operation. The cutting angles of the rootstock and scion were $34-45^{\circ}$ and $20-45^{\circ}$, respectively, while the stem length of the scion varied from 6 mm to 12 mm. The splices of rootstock and scion were heaped up in parallel and then fixed by a clip. It indicated that the ideal grafting system, adopting conventional grafting processes of seedlings specifications as well as conventionally manual root-removed splice grafting method, performed very well for seedlings gripping and transporting, supplying clip, clipping and discharging grafted seedlings while workers supplied seedlings to the semi-automatical system.