• 제목/요약/키워드: Work-Song

검색결과 1,772건 처리시간 0.035초

순환 근무와 오픈 주방 시스템이 직무 만족과 직무 스트레스에 미치는 영향 (The Effect of Shift Work and the Open Kitchen System on Job Satisfaction and Job Stress)

  • 채현석
    • 한국조리학회지
    • /
    • 제14권4호
    • /
    • pp.339-356
    • /
    • 2008
  • The purpose of this study is to provide the developmental basic data of a change in shift work types by making a self-administered survey of the effect of commitment by shift work and the open kitchen system on job satisfaction and job stress, and mutual relation between variables on 287 cooks in luxury hotels. Analysis showed that the operation of the shift work system was effective in reducing the internal stress of the cooks, their external stress, or their self-uncertainty on the job, and the business by the open kitchen system was effective in raising self-esteem. In addition, job commitment by shift work and the open kitchen system were effective in promoting the job satisfaction of employees, interpersonal relations, promotion, benefits and wages. Consequently, the decrease of external and internal stress or self-uncertainty and the improvement of job satisfaction can be connected with the increase of productivity or cost reduction. Therefore, the open kitchen system should be properly applied to the shift work system, along with sanitation, safety and the periodic checkup of kitchen.

  • PDF

주야2교대제에서 주간연속2교대제로의 전환 후 스트레스반응의 감소와 관련인자: 일개 완성차 제조사의 사례 (Decrease in Stress Response and Related Factors After Transition to Consecutive Day Shift from Day and Night Shift: A Motor Assembly Factory Case)

  • 송한수
    • 한국산업보건학회지
    • /
    • 제26권4호
    • /
    • pp.426-435
    • /
    • 2016
  • Objectives: The major objective of this study was to analyze stress response after a change to consecutive day shifts from day and night shifts in a motor assembly factory. Methods: Using a survey conducted by a labor union, we collected data on stress response index(SRI), lifestyle factors, work-family conflict and job stress before and after a shift system change. We analyzed the transition on the SRI among 222 workers. The cut-off point for the SRI was a T-score over 60. Results: The high risk stress response group was 20.3% of the population before the shift system change. After the shift system change it decreased to 11.3%. After the shift system change, social support improved, leisure time became more sufficient, work-family conflict declined, and sleep quality in the night shift week improved. In multivariable linear regression, among workers under 40 years old sleep quality on night shift, leisure time sufficiency, social support and work-family conflict contributed to the improvement of stress response. Among workers over 40, work-family conflict contributed to the improvement of stress response. Conclusions: The change to consecutive day shifts improved stress response and mediated with improved nighttime sleep, decreased work-family conflict, increased leisure time and improved work-family conflict.

남성 장시간 근로집단 및 그 배우자집단의 생활시간배분 (Time allocation of men who work long hours and their wives)

  • 송혜림;김유경;김주희
    • 가족자원경영과 정책
    • /
    • 제21권3호
    • /
    • pp.43-59
    • /
    • 2017
  • This study aimed to analyze time allocation for men who work long hours and their wives. Using 2014 time-use survey data (provided by Statistics Korea), we analyzed the amount of time spent in four areas-paid work, housework, leisure, and life essentials-of male workers who work more than 52 hours a week and of their wives. Descriptive statistics and a paired t-test were conducted using SPSS version 18.0. The results were as follows: First, the time allocation of men who worked long hours differed from their wives with the exception of personal maintenance time. Second, the working time of wives who work long hours was longer than their husbands who work long. Third, men who worked long hours did less housework when their wives were employed than when they were not employed. All the results showed gender differences in terms of time allocation. Equal role-sharing between spouses is needed for the work-life balance of both husbands and wives.

포스트 코로나 시대 재택근무의 위험성과 개선방향 - 정신적, 신체적 사안을 중심으로 (Risk and Improvement Measures of Work from Home in the Post-COVID-19 Era - Focusing on Mental and Physical Issues)

  • 엄태수;신은택;송창근
    • 한국안전학회지
    • /
    • 제38권3호
    • /
    • pp.93-101
    • /
    • 2023
  • The COVID-19 pandemic has significantly impacted how people work, resulting in a massive shift towards working from home or remotely. Work from home has played a critical role in reducing the transmission of COVID-19 by limiting in-person interactions and reducing the density of people in office buildings. It also enabled businesses and organizations to continue operating while keeping their employees safe and healthy. The COVID-19 pandemic accelerated the adoption of work from home in business and organizational sectors worldwide, and it is likely to continue as a preferred mode of work even after the pandemic is over. This shift towards working from home has not only impacted the way people work but also has significant implications for urban development, transportation, and the environment. This study intends to develop measures for addressing potential physical and mental health issues among remotely working employees. Additionally, it identifies the major influencing factors of home workers' health hazards and proposes improvement measures that can be applied to working from home, along with existing laws and prevention methods.

공정능력(工程能力)의 저해요인분석(沮害要因分析) (An Analysis of Hindrance Factors of Process Capability)

  • 송서일;황의철
    • 대한산업공학회지
    • /
    • 제11권2호
    • /
    • pp.131-140
    • /
    • 1985
  • This paper analyses the hindrance factors of process capability. The reasons of the products which are out of specification can be accounted on the hindrance factors. An $\hat{e}$nquete which consists of 4 categories such as technical knowledge, work performance, work environment, and human relations at home and office, is prepared and handed out to 1000 works to get information. And Spearman's Correlation Coefficient (${\rho}s$) is adapted as an anaysis and consideration criterion. In consequence, it is revealed the next 4 factors become the vital hindrance factors of process capability: (1) unskillful working (2) over load for operators (3) imperfect work environment (4) incoordination of human relations And the correspondent policy can be summarized as follows: (1) propagation & fixation of I.E. techniques (2) harmonization of human relations (3) improvement of work environment (4) strengthening the T.W.I.

  • PDF

새로 발굴된 이중경의 오대어부가 (A Study on the 'Ohdae Eubuga' of Suheon Lee Jung Kyeung)

  • 장인진
    • 한국문헌정보학회지
    • /
    • 제10권
    • /
    • pp.149-188
    • /
    • 1983
  • This study is about a literary man, Suheon Lee Jung Kyeung(AD. 1599-1678) and his poem 'Ohdae Eubuga' written in the language of the common people(RiEu) of Cho Seon dynasty. The outline of this study are as follows: 1) The work has been written at Ohdae, Cheongdo Gum, Kyeung-sang Do, in AD. 1656 that is the 7th year of King Hyo Jong of Cho Seon dynasty. 2) The work was written in the Korean and Chinese characters, in the form of the ancient Korean ode (Sijo). The twenty odes are composed of 'Eubuga' with 14 poems and 'Eububyeulgok' with 6 poems. The pleasureof his public life was well represented in these poems. 3) The work is included in his original manuscript 'Japhwewonjib' written in AD. 1664, the 5th year of King Hyeun Jong of Cho seon dynasty. 4) It seemed that the work has been mostly influenced by 'Mooyee Gugokga' of Joo Hee(AD. 1130-1200) of South Song dynasty, 'Eubusa' of Nongam Lee Hyeun Bo(AD. 1467-1555) and 'Dosan Sibyeegok' of Toegei Lee Hwang(A.D. 1501-1570) of Cho Seon dynasty.

  • PDF

공작기계 오차 모델링과 보정에 관한 연구 (On Error Modeling and Compensation of Machine Tools)

  • 송일규;최영
    • 한국정밀공학회지
    • /
    • 제13권1호
    • /
    • pp.98-107
    • /
    • 1996
  • The use of composite hyperpatch model is proposed to predict a machine tool positional error over the entire work space. This is an appropriate representation of the distorted work space. This model is valid for any configuration of 3-axis machine tool. Tool position, which is given NC data or CL data, contains error vector in actual work space. In this study, off-line compensation scheme was investigated for tool position error due to inaccuracy in machine tool structure. The error vector in actual work space is corrected by the error model using Newton-Raphson method. The proposed error compensation method shows the possibility of improving machine accuracy at a low cost.

  • PDF

건강가정지원센터의 교육사법에 대한 평가와 발전방안 (The Evaluation and Alternatives on the Educational Work in Healthy Family-Support Center)

  • 송혜림;정영금
    • 가족자원경영과 정책
    • /
    • 제12권1호
    • /
    • pp.1-20
    • /
    • 2008
  • The purpose of this study is to provide the information for problem solving and development, and to suggest future directions for educational work of HFSC. For this purpose, the annual reports of 40 centers were analyzed and a staff survey was carried out. On the basis of these reports and the survey, the benefits of the educational programs were examined and alternatives for better educational work are suggested.

  • PDF

공정관리와 연계한 건설 검측 업무 체계화 방안 (Integration of Construction Inspection to Schedule Management )

  • 송보현;정승환;이진강;최재현
    • 한국건축시공학회:학술대회논문집
    • /
    • 한국건축시공학회 2023년도 봄 학술논문 발표대회
    • /
    • pp.161-162
    • /
    • 2023
  • The construction inspection is conducted by the contractor or construction supervisor after a certain stage of work has been completed. As the consturction inspection task is dependant on construction schedule, however, it is difficult to plan inspection task systematically, resulting in increased supervision costs, delays in construction, and disputes. Therefore, this study aims to integrate inspection work with schedule management to systematize inspection procedures. Firstly, the inspection work is defined based on the construction supervision checklist. Then its relationship with the construction process, required time, and resources for inspection tasks are defined in construction schedule. Lastly, a process management program is used to assess the effects of applying the inspection work and examine changes in the overall construction period and process management. The proposed method in this study can support to plan construction inspection more systematically and to improve the effectiveness of construction quality management.

  • PDF