• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.8
• /
• pp.569-581
• /
• 2016

The purpose of this study was to define the quality of nursing services in relation to a nurse's psychosocial factors (type A behavior pattern, self-esteem, locus of control, and anxiety), job stress, and fatigue. This study targeted 503 nurses currently working at one of six general hospitals in Daejeon city, the data were collected by a self-administered questionnaire, which was surveyed from April 1 to June 30, 2014. According to multivariate logistic regression analysis, the high self-esteem, locus of control, and strong support by supervisor and co-workers decrease the risk of a low career quality. In contrast, high situational fatigue and overall fatigue increase the risk of a low career quality. According to the results of hierarchical multiple regression analysis, the quality of nursing services increased with age, the subjective health condition was satisfying, aptitude corresponded to the jobs, self-esteem was high, anxiety was low, support by co-workers was strong, and the overall fatigue was low. Above results suggest that the quality of nursing services of nurses who work at a general hospital has a strong correlation with the psychosocial factors, job stress, and fatigue.

• Korean Journal of Cognitive Science
• /
• v.31 no.1
• /
• pp.1-23
• /
• 2020

This paper introduces SNUDM, an analysis program for Ratcliff's diffusion model, which has been one of the most important models in cognitive psychology over the past 35 years and which has come to occupy an important place in cognitive neuroscience in recent years. The analysis tool is designed with the basic principles of easy comprehension and simplicity in use. A diffusion process was programmed as the limit of a simple random walk in a manner resembling Ratcliff & Tuerlinckx(2002). The response time distribution of the model was constructed by simulating the time taken by a random walk until it reaches a threshold with small steps. The optimal parameter values in the model are found to be the smallest value of the chi-square values obtained by comparing the resulting distribution and the experimental data using Simplex method. For simplicity and ease of use, the input file used here is created as a file containing the quantile of the reaction time, the trials and other information. The number of participants and the number of conditions required for such work programs are given in a way that answers the question. Using this analysis tool, the experimental data of Ratcliff, Gomez, & McKoon(2004) were analyzed. We found the very similar pattern of parameter values to Ratcliff et al.(2004) found. When comparing DMAT, fast-dm and SNUDM with the generated data, we found that when the number of trials is small, SNUDM estimates the boundary parameter to a value similar to fast-dm and less than the DMAT. In addition, when the number of trials was large, it was confirmed that all three tools estimate parameters similarly.

• The Korean Journal of Community Living Science
• /
• v.25 no.1
• /
• pp.99-111
• /
• 2014

To verify welfare needs, rural health and environmental factors were compared between agricultural and nonagricultural groups over the past 10 years. Based on a survey of rural life by the Rural Development Administration, whose sample included agricultural (72.8%) and nonagricultural (27.2%) groups, all factors were analyzed using SAS ( 9.3). For rural home heating, the use of oil boilers (77.2%-78.0%) decreased (53.0%-53.7%) over the same period, whereas that of electric boilers increased (21.9% and 13.5% for agricultural and nonagricultural groups, respectively). The joint water- supply increased, and the use of flush toilets (52.4% to 84.5% in the agricultural group and 64.6% to 81.4% in the nonagricultural group) and hot-water bathing was higher in the agricultural group (79% to 92.6%) than in the nonagricultural group (72.2% to 87.6%) at the p<0.001 level. Incineration accounted for the largest portion of household waste until 2006, when it was replaced by other treatment methods such as the pay-per-treatment option (44.4% and 68.3% in the agricultural and nonagricultural groups, respectively) (p<0.001). Garbage disposal in 2001 was mainly burial or animal feed, but separate collection increased in 2010 (42.2% and 64.3% in the agricultural and nonagricultural groups, respectively) (p<0.001). The self-perception of health was lower in the agricultural group than in the nonagricultural group (2.96 to 2.74 on a five-point scale in the agricultural group and 3.07 to 2.98 in the nonagricultural group). Drinking decreased less in the agricultural group (criteria: one point once a week,; 1.48 to 1.20) than in the nonagricultural group (1.13 to 0.80) at p<0.001, and a similar pattern was found for smoking (p<0.001). Health screening decreased in the last 10 years (scoring based one point/1-2 times per year,: 0.94 to 0.64 in the agricultural group and 1.08 to 0.69 in the nonagricultural group;p<0.01). These results indicate that various health and environmental factors were less favorable to farmers except for bathing in comparison to nonagricultural living in the same area. This suggests that people in agriculture are less likely to live and work in favorable environments than those outside the sector and thus indicates a need for more attention to the national health welfare system for farmers for systematic realization.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.22 no.2
• /
• pp.91-99
• /
• 2014

The common-rail injectors are the most critical component of the CRDI diesel engines that dominantly affect engine performances through high pressure injection with exact control. Thus, from now on the advanced combustion technologies for common-rail diesel injection engine require high performance fuel injectors. Accordingly, the previous studies on the numerical and experimental analysis of the diesel injector have focused on a optimum geometry to induce proper injection rate. In this study, computational predictions of performance of the diesel injector have been performed to evaluate internal flow characteristics for various needle lift and the spray pattern at the nozzle exit. To our knowledge, three-dimensional computational fluid dynamics (CFD) model of the internal flow passage of an entire injector duct including injection and return routes has never been studied. In this study, major design parameters concerning internal routes in the injector are optimized by using a CFD analysis and Response Surface Method (RSM). The computational prediction of the internal flow characteristics of the common-rail diesel injector was carried out by using STAR-CCM+7.06 code. In this work, computations were carried out under the assumption that the internal flow passage is a steady-state condition at the maximum needle lift. The design parameters are optimized by using the L16 orthogonal array and polynomial regression, local-approximation characteristics of RSM. Meanwhile, the optimum values are confirmed to be valid in 95% confidence and 5% significance level through analysis of variance (ANOVA). In addition, optimal design and prototype design were confirmed by calculating the injection quantities, resulting in the improvement of the injection performance by more than 54%.

• Science of Emotion and Sensibility
• /
• v.6 no.4
• /
• pp.15-23
• /
• 2003

Recently, there have been many attempts to develop BCI (brain computer interface) based on EEG (electroencephalogram). Measurement and analysis of EEG evoked by particular stimulation is important for the design of brain wave pattern and interface of BCI. The purpose of this study is to develop a general-purpose system that measures subject's reaction time after audio-visual stimulation which can work together with any other biosignal measurement systems. The entire system is divided into four modules, which are stimulation signal generation, reaction time measurement, evoked potential measurement and synchronization. Stimulation signal generation module was implemented by means of Flash. Measurement of the reaction time (the period between the answer request and the subject reaction) was achieved by self-made microcontroller system. EEG measurement was performed using the ready-made hardware and software without any modification. Synchronization of all modules was achieved by, first, the black-and-white signals on the stimulation screen synchronized with the problem presentation and the answer request, second, the photodetectors sensing the signals. The proposed method offers easy design of purpose-specific system only by adding simple modules (reaction time measurement, synchronization) to the ready-made stimulation and EEG system, and therefore, it is expected to accelerate the researches requiring the measurement of evoked response and reaction time.

• Journal of Plant Biotechnology
• /
• v.32 no.3
• /
• pp.181-186
• /
• 2005

This work was conducted to evaluate the effects of rooting on tissue cultured M.9 (Malus domestica Bork. cv, tcM.9) after layering in field. We investigated an appearance period of first root in shoot, rooting ratio, contents of indole-3-acetic acid (IAA), abscisic acid (ABA), inorganic matters, sugars, and lignin in rooting areas of stems by layering. First root in shoot of tcM.9 and natural M.9 appeared 25 and 30 days after layering (DAL), respectively. Rooting ratio was much higher in tcM.9 than in natural M.9. The content of IAA was higher in tcM.9 than in natural M.9 before layering, but it was reversed at 20 and 30 DAL. In contrast, the content of ABA was much higher in natural M.9 than in tcM.9 in case of both before and 10 and 20 DAL. The contents of N, B, Mn, and Zn were significantly higher in tcM.9 than in natural M.9 both before and 10 and 20 DAL. The contents of sugars in tcM.9 had the similar pattern of the contents of inorganic materials. There were statistically significant differences in the contents of sucrose and glucose at 30 DAL as well as the content of maltose at 20 and 30 DAL. The content of lignin was significantly higher in tcM.9 than in natural M.9 before layering and 10 and 30 DAL while there was no difference 20 DAL. Therefore, improvement of rooting ability in the tissue cultured root stock M.9 might be due to the changes of inorganic matters or lignin rather than that of sugars and hormones.

• Journal of Korean Society of Water and Wastewater
• /
• v.34 no.3
• /
• pp.211-220
• /
• 2020

When domestic sewage and rainwater runoff are discharged into a single sewer pipe, it is called a "combined sewer system." The sewage design standards in Korea specify the flow velocity based only on the volume of rainfall; therefore, sedimentation occurs on non-rainy days owing to the reduced flow rate and velocity. This sedimentation reduces the discharge capacity, causes unpleasant odors, and exacerbates the problem of combined sewer overflow concentration. To address this problem, the amount of sewage on non-rainy days, not just the volume of rainfall, should also be considered. There are various theories on sedimentation in sewer movement. This study introduces a self-cleansing velocity based on tractive force theory. By applying a self-cleansing velocity equivalent to the critical shear stress of a sand particle, sedimentation can be reduced on non-rainy days. The amount of sewage changes according to the water use pattern of citizens. The design hourly maximum wastewater flow was considered as a representative value, and the velocity of this flow should be more than the self-cleansing velocity. This design method requires a steeper gradient than existing design criteria. Therefore, the existing sewer pipelines need to be improved and repaired accordingly. In this study, five types of improvement and repair methods that can maximize the use of existing pipelines and minimize the depth of excavation are proposed. The key technologies utilized are trenchless sewer rehabilitation and complex cross-section pipes. Trenchless sewer rehabilitation is a popular sewage repair method. However, it is complex because the cross-section pipes do not have a universal design and require continuous research and development. In an old metropolis with a combined sewer system, it is difficult to carry out excavation work; hence, the methods presented in this study may be useful in the future.

• Information Systems Review
• /
• v.4 no.2
• /
• pp.209-222
• /
• 2002

EDI (Electronic Data Interchange) has been widely utilized to support Business Activities since it has such advantages as fast transfer of information, less documentation work, efficient information exchange etc. Recently e-business environment has urged the traditional EDI system to be changed to ebXML framework. To apply the ebXML framework to a certain industry, it is required to implement Business Process (BP), Core Component (CC), Collaboration Protocol Profile (CPP), Collaboration Protocol Agreement (CPA), Messaging system etc. We have selected the port and logistics industry as a target domain to apply ebXML framework, since the EDI usage ratio of it is relatively higher than other industries. In this paper, we have analyzed the current status of EDI system and transaction processes in the port and logistics industry. We have defined the business process that will be registered in the registry/repository, the main component of ebXML framework, using UN/CEFACT modeling methodology. And Business Collaborations, Business Transactions, Business Document Flows, Choreography, Pattern, etc. are represented using UML according to UN/ CEFACT modeling methodology, to apply ebXML Framework to the port and logistics distribution industry. Also we have suggested the meta methodology for applying the ebXML framework to other industries.

• Journal of Fashion Business
• /
• v.1 no.2
• /
• pp.46-54
• /
• 1997

The purpose of this study is to understand women's wear manufacturing industries. First, the study was to investigate the present production systems and how much the automatic facility are by comparing them. This study enhanced more efficient, stable, and suitable work line. This intern will direct the way in which automatic facilities will be created. Second, through this study on the general character of the inspectors, the ratio of impaired goods, and the reasons for unsatisfactory goods, I intended to find out a way to decrease the impaired goods and to produce competitive and high quality goods. The results of the survey can be summarized as follows; 1. The result of the research on the automatic industrial facilities shows that the majority of the factories (77.4%) are 40% below the automatic facility rate. The reasons for this according to order are that was a deficit in money, no reason for expensive machines, and lack of the technique and the number of workers required to handle the machines. 2. At this time, the most required equipments are shown according to its importance; automatic sewing machine, automatic cutting machine, automatic spreading machine, and finishing & pressing machine. So in the women's wear manufacturing industries, they think that they need more automatic cutting machine, automatic spreading machine in the cutting field rather than high price automatic machine in the sewing field such as pattern former, pocket welting, automatic sleeve connecting machine and automatic label connecting machine. 3. The result of the research in the goods quality shows that the average impaired rate is 12.7% at the first inspection. In addition the average rate for complete impaired rate is 1.52%. The line system shows that it has a impaired rate that is double the rate of the pair system. Because of this, the industries plan to combine the line system and pair system to create an improved and suitable production system which can boost the quality and productivity of the goods. 4. The fabric is the main point of the impaired goods. The factors of the impaired goods in manufacturing are the lack of mental abilities of the worker, impaired fabrics and a lack of cooperation in the working system. Furthermore, there is a lack of technique for new material. 5. To prohibit impaired goods in manufacturing, there need to be a way to educate the workers and to enhance the workers' mind on the productive goods. Also there need to increase in the investments of automatic production machines. Finally there need to be a standardized working line. Therefore, there need to be an improvement on the management of the production of goods, the development of technique and an increase in the education for the workers, with this there will be a decrease in impaired goods, and an increase in better quality of goods to enforce the domestic apparel industries.

• Journal of Korean Society of Transportation
• /
• v.35 no.6
• /
• pp.511-524
• /
• 2017

This study aims to evaluate the availability of ABM (Active-Based Model), FEATHERS, as a policy evaluation tool. To achieve the goal, scenario analysis on flexible working policy was conducted to measure its impact on activity-travel behavior. As a consequence, there seems no significant change in worker's daily life, other than mitigating traffic congestion due to decreasing commuting travel in the rush hour. The result of VKT (vehicle kilometers traveled) shows an opposite pattern according to given household/individual constraints. The scenario analysis on telecommuting indicates a decreasing trend in both travel frequency and distance because of the diminished number of commuting trips. As the activity space of telecommuters is shifted to a residential area, there are more short-distance trips by using non-motorized transport, which leads to decrease in VKT (using a private vehicle). Thus, the sensitivity of VKT by population groups varies due to transport mode shift (between personal and another mode) and growing non-work trips (using a private mode). This study found few things. First, it is necessary to evaluate the details of policy impact by population groups since it can be varied depending on household/individual characteristics. Second, the case study shows a promising performance of ABM as policy measurement that provides reality in policy evaluation. Third, ABM allows us to do more accurate analysis (i.e. time-series analysis by population groups) of policy assessment than those of FSM (Four-Step Model). Lastly, a further effort in data collection, literature review, and expert survey should be made to enhance the accuracy and confidence of future research.