• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.100-103
• /
• 2001

The magnetic force calculation methods, the Maxwell's stress tensor method, virtual work method, and nodal force method are reviewed. The methods are applied to the magnetic force calculation of 2D linear and nonlinear Problems. As the results the convergence of the methods as the number of elements increases, accuracy of the methods, and integral path dependence of the methods are discussed. Finally some recommendations on the usage of the methods, including the determination of the integral path, are given.

• 한국표면공학회지
• /
• 제33권4호
• /
• pp.241-250
• /
• 2000

Popcorn cracking phenomena frequently occur in thin plastic packages during the solder reflow process, which are definitely affected by poor adhesion of Cu-based leadframe to epoxy molding compounds (EMCs). In the present work, in order to enhance the adhesion strength, a brown-oxide treatment on the Cu-based leadframe was carried out and the adhesion strength of leadframe/EMC interface was measured in terms of fracture toughness by using sandwiched double-cantilever beam (SDCB) specimens. After the adhesion tests, fracture surfaces were analyzed by SEM, AES, EDS and AFM to make the failure path clear. Results showed that failure path was closely related to the oxidation time and the interfacial fracture toughness.

• 한국전기전자재료학회논문지
• /
• 제32권3호
• /
• pp.241-245
• /
• 2019

This work presents the response characteristics of a ZnO varistor to conductive EMP. An E1 pulse, standardized to MIL-STD-188-125-1, was applied to the varistors wherein the residual current and response times were measured with the applied E1 pulse current. Additionally, the response time was measured according to the length of the connection path. Consequently, the amplitude of the residual voltage through the ZnO varistors was increased with increasing amplitude of the applied E1 pulse current. As the length of the connection path increased, the operating response time and residual peak voltage also increased. These results indicate that the response characteristics of ZnO varistors can be applied to basic data to support the use of varistors as a protective measure against conductive EMP.

• Bulletin of the Korean Chemical Society
• /
• 제11권3호
• /
• pp.194-200
• /
• 1990

Various mechanistic aspects of the A2 hydrolysis of methyl acetimidate were explored using the MNDO method. As in thecorresponding reactions of acetamide and methyl carbamate, a proton transfer pre-equilibrium exists between the N-protonated and the O-protonated tautomers, and the subsequent hydrolysis proceeds from the more stable N-protonated form. Of the two reaction pathways, the $A_{AL}2$ path is favored in the gas phase and in concentrated acid solutions, whereas the $A_{AC}2$ path is favored in less acidic solutions with a stable cationic tetrahedral intermediate formed in the rate determining step. Negative charge development on the alkoxy oxygen in the transition state suggested a rate increase with the increase in the electron withdrawing power of the alkoxy group. Calculations on the reaction processes with AM1 indicated that MNDO is more reliable in this type of work, although AM1 is better than MNDO in reproducing hydrogen bonds.

• International Journal of Internet, Broadcasting and Communication
• /
• 제14권3호
• /
• pp.63-68
• /
• 2022

Two wavelength reconfigurable optical nodes are designed. One for 20km or shorter link length, and the other for up to 60km link length. While the first one requires no dispersion compensation, the latter needs dispersion compensation fiber included in the node, which requires additional optical amplifier to compensate the insertion loss of DCF. We calculate all the optical path losses in both cases using the typical value of optical components in the market to see the feasibility of the designed optical node. The minimum received power in the node is calculated to be -21.5dBm without DCF and -12.5dBm with DCF, respectively. These received powers are above the receiver sensitivity both for OC-48 and OC-192 according to the previous work.

• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.121-129
• /
• 1995

The objective of this research is to develop an effective inspection planning strategy for sculptured surfaces by using 3-dimensional Coordinate Measuring Machine (CMM). First, the CAD/CAM database is generated by using the Bezier surface patch mathod and variable cutter step size approach for design and machining of the workpiece model. Then, optimum measuring point locations are determained based on the mean curvature analysis to obtain more effective inspection results for the given sample numbers. An optimal probe sequence generation method is proposed by implementing the Traveling Salesperson (TSP) algorithm and new guide point selection methods are suggested based on the concepts of the variable distance between the first and second guide points. Finally, simulation study and experimental work show the effectiveness of the proposed strategy.

• 한국건설관리학회논문집
• /
• 제9권6호
• /
• pp.204-215
• /
• 2008

리모델링 공사는 신축공사와 달리 철거공사가 주공정으로 선행되어야 하는데 현행 철거공사는 개략적 수준의 철거관리계획에 의한 생산성만을 강조한 철거 형태로 인해 폐자재 재활용이 되지않고 있어 자원낭비, 환경파괴를 가중 시키고 있으며, 철거작업 중 작업자의 안전과 구조체의 안전등이 전혀 고려되지 않고 철거하는 것이 현실이다. 따라서 친환경 철거공사가 되기 위해서는 프로세스의 개선이 우선 되어야하며 그 단계를 1) 철거관련 조사분석, 2) 철거관리 도서작성, 3) 철거관리 시공계획서작성, 4) 철거시공 및 감리, 5) 철거 후 관리의 5단계로 구분 하였으며, 특히 철거도면 작성으로 표준철거 WBS가 구축되고, 철거장비 및 공법, 폐기물 투하, 철거공정계획 수립이 가능하며 마감재 철거 후 구조체의 안전점검을 실시하므로써 철거중 불가피한 보수보강이 가능하며, 철거완료 Check list 작성에 따라 리모델링 본공사의 Database 활용이 가능하게 되었다. 본 논문에서는 현행리모델링 철거공사 프로세스(AS-IS)의 문제점을 분석하고 개선된 친환경 리모델링 철거공사 프로세스(TO-BE)를 IDEF0 모델을 사용하여 제안하고자 한다.

• 인터넷정보학회논문지
• /
• 제21권5호
• /
• pp.31-37
• /
• 2020

Last year's Goseong-Sokcho forest fires have highlighted the limitations of extinguishing work for night-time forest fire and the importance of quick identification for information on the spread of forest fire. However, it is not easy to find services that take into account the characteristics of forest fires, as most existing disaster-related mobile applications and research assume various disaster situations rather than just forest fire situations. Therefore, a system that can provide information quickly is needed, taking into account the characteristics of forest fires and the limitations of extinguishing work. In this paper, we propose evacuation route guidance services that bypass areas where fire has already spread, supplement existing methods of extinguishing work, and provide general information on forest fire situations in real time, by putting drones into forest fire situations. It has been implemented to automate image analysis using the Rekognition service of Amazon Web Service (AWS), and the results of fire detection and the T Map API guide the evacuation path. It is expected that the results of this paper will allow efficient and rapid rescue and extinguishing work to be carried out, and further reduce the damage of human life caused by forest fires.

• 국제학술발표논문집
• /
• The 8th International Conference on Construction Engineering and Project Management
• /
• pp.409-416
• /
• 2020

This paper proposes a study measuring productivity improvement by using a type of technology called "Machine Guidance" through work sampling in earthwork. Earthwork is the activity typically on the critical path, indicating that productivity for the activity is critical for managing schedule on time. Thanks to the development of sensing and information system technologies, productivity for earthwork has been improved. While there have been many studies investigating the application of a certain type of technology to earthwork, few studies have measured the productivity improvement and presented how the technology leads to productivity improvement. Based on the thorough literature review, it is hypothesized that Machine Guidance contributes to improving productivity of earthwork by reducing indirect workhours spent for information waiting and inspection. In addition to the literature review, this paper presents a research model to test the hypothesis by using the work sampling technique. By proving and quantifying the productivity improvement from the technology use, this study can help practitioners justify the investment for technology use, which will contribute to the deployment of technology and more effective execution of earthwork.

• 한국콘텐츠학회논문지
• /
• 제21권1호
• /
• pp.541-551
• /
• 2021

도서관 사서의 수많은 업무 중 도서 정리 업무는 사서가 일일이 정리해야 하는 일이기 때문에, 투입되는 인적·시간적 비용이 크다. 이러한 문제를 해결하기 위해 최근 인공지능 기술을 접목한 도서 정리 로봇에 관한 관심이 증가하고 있다. 본 연구에서는 도서 정리 로봇에 적용할 수 있는 다중경유지 최단 경로 알고리즘인 K-ACO 알고리즘을 제안한다. 제안하는 K-ACO 알고리즘은 하나의 로봇이 아니라 여러 대의 로봇을 가정하고 있다. 또한, K-ACO는 개미 알고리즘을 개선하여 K개의 군집을 만들고 각 군집 별 최단 경로를 제공해준다. 본 논문에서는 제안한 알고리즘의 성능 분석을 도서 정리 시간의 관점에서 실시하였다. 제안한 알고리즘인 K-ACO 알고리즘을 한 대학교 도서관에 적용하여 현재 도서 정리 알고리즘과 비교해 보았다. 시뮬레이션을 통해 제안하는 알고리즘은 도서 정리 업무를 치우치지 않고 공평하게 배분하여 궁극적으로 전체 일이 끝나는 시간을 확연히 줄일 수 있음을 알 수 있었다. 본 연구 결과를 통하여 제안한 알고리즘의 적용으로 도서 정리에 필요한 인적·시간적 비용을 절감하여 도서관 내 양질의 서비스 향상을 기대한다.