• 대한안전경영과학회지
• /
• 제13권1호
• /
• pp.115-119
• /
• 2011

To help the corporations ensure more efficient production management, the Enterprise Resource Planning (ERP) system has been introduced in operation, together with a variety of approaches to make improvements in terms of quality and productivity issues. Yet, with the different types of ERP systems in operation, many companies are going through many difficulties not only in having greatly reduced work efficiency but also in making prompt decisions from the entire group-based integrated information. In this study, the analysis was made on their own ERP systems and working processes operated by a company running the multiple number of productions from the domestic and the overseas suppliers, in order to support their interacted work flow regarding their products and help improve the work efficiency by establishing standardized ERP system. Through this, it is expected to ensure more competitive system in operation by securing the flexibility in the production as well as efficient resource distribution under the corporate context of cost reduction and quality improvement.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.213-221
• /
• 2022

Defects are the risk factors in the construction process of buildings. They cause damage, delaying the construction duration. They especially cause adverse effects on the top-down construction method. This study analyzed the degree of construction delay induced by each work type, focusing on defects in the top-down method. Then, we derived construction delay induction coefficient from different work types in order by using the severity of construction delay per defect and the occurrence probability of defect; this assessment model measures the impact of defects on construction delay for each work type. Furthermore, by comparing each work type based on the defect frequency and the construction delay induction coefficient, we found work types that need to be administered attentively. We identified that plastering work was easy to overlook, requiring caution in defect management. This study provides an efficient defect management system suitable for the buildings that are built using the top-down construction method.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2006년도 정기학술발표대회 논문집
• /
• pp.722-726
• /
• 2006

LCI(Lean Constrcution Institute)에 의해 개발되어진 라스트 플래너(Last Planner System)은 Master Schedule, Phase Schedule, Lookahead Schedule, Weekly Work plan의 4단계로 이루어진다. 본 연구는 LSP의 4단계 중 Weekly Work Plan 단계에서 이루어지는 PPC(Percent of Plan Completed)의 측정 프로세스에 초점을 맞추고 있다. PPC 적용에 따른 여러 가지 장점에 대해서는 이미 해외 여러 나라에 의해 소개되어진 바 있지만, 아직까지 우리나라에서 PPC란 용어 자체가 낯선 상황이며, PPC 관련 연구가 미흡한 실정이다. 따라서, 본 연구는 한국 건설산업에 PPC를 도입하기에 앞서 라스트 플래너 시스템의 공정관리체계와 국내 공정관리체계를 비교 ${\cdot}$ 분석함으로써 우리나라 현실에 적합한 작업성취율 측정을 위한 공정관리절차를 제시하고 이를 도입하기 위해 선행되어져야할 사항에 대해 제시하고자 한다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2007년도 춘계학술발표회 논문집
• /
• pp.417-420
• /
• 2007

Mobile facility management system is a on-site management tool to collect and update various facility data. But there is a chance to make a data inconsistency between lot of concurrent workers. And facility management system requires to keep records about work log within a certain period of time. This paper describes the design and implementation of mobile facility management system, which provide efficient data synchronization mechanism using version managent technique on large facility data in concurrent work environment. And proposed system is able to keep workers update log persistently.

• 산업경영시스템학회지
• /
• 제21권48호
• /
• pp.279-289
• /
• 1998

This study deals with the schemes of design, plan and operate maintenance management support systems and with the engineering approach for the solutions to build the maintenance management for the production efficiency. Maintenance Management Information System(MMIS) is the task that must focus on machinery historical data and planned maintenance action. Also the efficient supporting system in a maintenance management is achieved by database which is based on process of machinery's failure history. Designing method of maintenance management information system, maintenance modules are consisted of six factors ; machinery's historical data, lubrication control, check sheet, repair work, availability report, and performance report(control board and detailed reports), and then operators can rapidly utilize data in work place. In the implementation of designed model, program coding has been developed by Visual Basic 3.0. Data insertion, deletion and updating which perform menu screen is implemented by reading data from database. Implementation model based on LAN environment and related data is stored in Microsoft DBMS.

• 가족자원경영과 정책
• /
• 제12권2호
• /
• pp.141-152
• /
• 2008

This study reviews a family-friendly system of companies from the viewpoint of family resource management. The concept of a family-friendly system in the workplace means that the strategy 'supports the family' or 'is sensitive to the family life' and recognizes a need for balance between work and family. The suggestions proposed in this study were as follows: First, the direction of a family-friendly system must reflect the needs of the family members positively and recognize diversity. Second, it must consider efficient methods relating to the matter of the gender because a corporate culture enabling men to use childcare leave has not grown, even in family companies. Third, the directions to check the present developing process of our society and to develop the suitable way to each company must be shown. This study has proposed that the subjects must solve immediately in the future with understanding the contents and looking around the status of the enforcement at the inside and outside of the country for a family-friendly system to handle the balance between work and family in the workplace. The problems were the context of the introductions and the results of balancing between work and family no matter whether the introduction of the system by company or not.

• 한국건축시공학회지
• /
• 제12권2호
• /
• pp.169-182
• /
• 2012

In the past, a strategic management of work demands has been increasingly challenged to design-build (DB) firms. Such a management is capable of providing sufficient profitable impact of a project on them. Total project profit is mainly related to actual resources, work completion time, amount of rework, and costs. The degree of recycling work packages in the DB project delivery system is used as a measure of the quality of the performed work. However, there are few models available to evaluate the impact of a demand management strategy on the DB firms and to predict its behavior. We propose a decision-making support model as an aid for assessing the amount of rework and for predicting project profit resulting in a convincible demand management strategy. This model is constructed by using a dynamic feedback approach that can analyze the problems arising in complex managerial systems. For the purpose of illustration, widely acceptable strategies were applied into the model to explore their impacts on the DB firms. The results indicate that the model is helpful for the managers in selecting the most appropriate demand management strategy for successfully achieving their objectives.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.1255-1255
• /
• 2022

Recently, research on digital twins to generate digital information and manage construction in real-time using advanced technology is being conducted actively. However, in the construction industry, it is difficult to optimize and apply digital technology in real-time due to the nature of the construction industry in which information is constantly fluctuating. In addition, inaccurate information on the topography of construction projects is a major challenge for earthmoving processes. In order to ultimately improve the cost-effectiveness of construction projects, both construction quality and productivity should be addressed through efficient construction information management in large-scale earthworks projects. Therefore, in this study, a 3D digital map-based AR site management work support system for higher efficiency and accuracy of site management was proposed by using unmanned aerial vehicles (UAV) in wide earthworks construction sites to generate point cloud data, building a 3D digital map through acquisition and analysis of on-site sensor-based information, and performing the visualization with AR at the site By utilizing the 3D digital map-based AR site management work support system proposed in this study, information is able to be provided quickly to field managers to enable an intuitive understanding of field conditions and immediate work processing, thereby reducing field management sluggishness and limitations of traditional information exchange systems. It is expected to contribute to the improvement of productivity by overcoming factors that decrease productivity in the construction industry and the improvement of work efficiency at construction sites.

• 대한안전경영과학회지
• /
• 제9권6호
• /
• pp.1-7
• /
• 2007

A study wish to present relation of safety characteristic deployment, which has the safety demand, safety characteristic, protection characteristic, safety regulation, safety education of unit work process. Safety characteristic deployment will be used in safety management education system design with a method of safety management system construction of unit work process.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.503-510
• /
• 2000

Recently, many kinds of research has been actively developing for a standardization and information related to the construction works. These works include the general field of design, construction, supervision, maintenance and management on facilities. The works of database construction for a standardization and information were chiefly propelled centering around the present conditions related to the design, construction work. The field related to maintenance and management on facilities lags behind in the works of database construction. The establishment of standard classification system(SCS) on facilities and inspection data is most important among the things related to maintenance and management to have a efficiently maintenance and management. This paper suggests SCS on facilities and inspection data according to that of facilities. On the basis of SCS of facilities and inspection data, code work with classification system and input work for a data of maintenance and management was practised. The purpose of this paper is to suggest a kind of statistics data and investigate a characteristics of inspection using statistic data on tunnel structures