• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.3
• /
• pp.171-181
• /
• 2009

This study was carried out to evaluate a musculoskeletal symptom and the work posture of the nurses in an operating room who have worked in the present department for more than one year. The job analysis of operating room nurses for ergonomic work posture analysis is divided into 14 tasks. On the basis of that, a survey research and ergonomic work posture analysis are also carried out. Among 41 operating room nurses of a cancer center in Kyonggi province who responded to the self-administered questionnaire, 20 nurses were observed and videorecorded to apply Rapid Entire Body Assessment(REBA) to ergonomic work posture analysis from April 16, 2007 to May 18, 2007. The results of analysis are as follows. The prevalence rate of musculoskeletal symptoms was 75.6% and its prevalence rates by part of the body are these followings; lower back and leg/foot 43.9%, shoulder 36.6%, neck 34.1%, hand/wrist/ finger 22.0%, arm/elbow 14.6%. In accordance with the results of ergonomic work posture analysis, 4 tasks that have a REBA score of 8 have high-risk levels and require an immediate management. It shows there is a significant correlation with overall musculoskeletal symptoms and objective workloads that are estimated by REBA. In conclusion, the work conditions of operating room nurses should be improved. It is also necessary that inappropriate work postures and ergonomic work conditions are improved to prevent musculoskeletal disorders of operating room nurses.

• IE interfaces
• /
• v.11 no.2
• /
• pp.177-190
• /
• 1998

The work-order performs an important role in make-to-order production. The development of work-order system in this production is more complex than work-order system in planing production. To construct work-order system, load of directors for work-order must be decreased, and production management between scheduling of master plan and current workshop conditions must be considered. In this study, we grasped troubles in present work-order system and flows of information for work order. Using these results are made database schemas and data flow diagrams for effective development of work-order system. And then, for successful establishment of work-order system and actual use of directors, we considered systematic and easy user-interface. For a case study, development procedures of work-order system are presented for plant factory.

• Fashion & Textile Research Journal
• /
• v.12 no.2
• /
• pp.203-213
• /
• 2010

This study examined the wearing conditions of working clothes of shipbuilding industry workers according to the working environmental factors and working process features. It was also investigated the relationship between the wearing sense of working clothes and the overall comfort according to work processes. In the working process of shipbuilding industry, the process of fitting, welding, grinding and painting were chosen by considering work environmental factors, disaster types, hazardous materials, work process features, working clothes and safety equipments of each work categorized. The workers of fitting process usually wore the standard working clothes, while more than 60% of the workers of welding, grinding and painting wore the specialized protective clothes. The hazardous work environmental factors such as noise, heavy dust, high temperature and noxious fumes affected to the workers of fitting, welding and grinding. However, the workers of painting were greatly damaged by organic solvent. The dissatisfaction with the wearing performance of working clothes was highly shown in the sweat absorbency, moisture permeability and body protection. In respect of the correlation between the overall comfort and the wearing sense of working clothes, the satisfaction was decreased in orders of movement comfort> sensual comfort> physiological comfort.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.8.1-8.12
• /
• 2023

Background: Prolonged use of visual display terminal (VDT) can cause eyestrain, dry eyes, blurred vision, double vision, headache and musculoskeletal symptoms (neck, shoulder, and wrist pain). VDT working hours among workers have greatly increased during the coronavirus disease 2019 (COVID-19) pandemic. Therefore, this study aimed to investigate the relationship between VDT working hours and headache/eyestrain in wage workers using data from the sixth Korean Working Conditions Survey (KWCS) (2020-2021) conducted during the COVID-19 pandemic. Methods: We analyzed the sixth KWCS data of 28,442 wage workers aged 15 years or older. The headache/eyestrain that occurred in the last year was assessed. The VDT work group included workers who use VDT always, almost always, and three-fourth of the working hours, while the non-VDT work group included workers who use VDT half of the working hours, one-fourth of the working hours, almost never, and never. To analyze the relationship between VDT working hours and headache/eyestrain, the odds ratios (ORs) and 95% confidence interval (CI) were calculated using logistic regression analysis. Results: Among the non-VDT work group, 14.4% workers experienced headache/eyestrain, whereas 27.5% workers of the VDT work group experienced these symptoms. For headache/eyestrain, the VDT work group showed adjusted OR of 1.94 (95% CI: 1.80-2.09), compared with the non-VDT work group, and the group that always used VDT showed adjusted OR of 2.54 (95% CI: 2.26-2.86), compared with the group that never used VDT. Conclusions: This study suggests that during the COVID-19 pandemic, as VDT working hours increased, the risk of headache/eyestrain increased for Korean wage workers.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.11a
• /
• pp.505-510
• /
• 2005

The manufacturing industries which played a major role in the rapid economic growth and industrialization of Korea in the late 20th century had considerable difficulties changing their manufacturing conditions from producer-oriented conditions to customer-oriented ones according to market changes. In this study, increase plant efficiency because grafts together modular system to plant layout and analyzes Work In Process(WIP) between product's cycle time and each process, family efficient plan wishes to choose opposite bank. Simulation approach used for presented methodology The effect will not gain the results for other reasons the inherent conditions of companies, people, and culture which have been hitherto described, but will be expected to help the direction for a new Lay-out production system to reflect on the native conditions rather than fixed technological means and methods in way of an analysis of fundamental problems which small and medium companies in Korea face.

• KIEAE Journal
• /
• v.11 no.3
• /
• pp.43-48
• /
• 2011

Recently, sustainable development is very important to all fields and environmental-friendly systems and this systems are also necessary to factory. The purpose of this study is to analyse environmental-friendly systems affect the working conditions of the factory's employees. In order to analyse the satisfaction levels of employees regarding their working conditions, the survey is conducted at various environmental-friendly factories and traditional factories. This survey shows that employees who work at environmental-friendly factories are more satisfied with their working conditions compared to their counterparts at traditional factories. Therefore, the factories that installed environmental-friendly systems provide better working conditions as to traditional factories.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.287-301
• /
• 2022

Objectives: This study compared the characteristics of the work environment between agricultural and general workers and analyzed the effects of agricultural working characteristics on work-related health problems. Methods: The participants of this study were 2,347 agricultural workers and 48,042 general workers who were selected by applying standardized weights to the raw data of 50,538 respondents from the 6th Korean Working Condition Survey (KWCS). Variables applicable to both worker groups and related to exposure to hazardous risk factors in the working environment, working hours and intensity of work, health problems and work-related status, and satisfaction with the work environment were selected. Chi-square tests and independent sample t-tests were performed to evaluate the differences in the variables between the two groups. Multivariate logistic regression analysis was conducted to analyze the effects of work environment characteristics on work-related health problems. Results: Compared to general workers, agricultural workers were more exposed to hazardous environments, irregular work patterns such as working on Saturday/Sunday, and short repetitive tasks. They reported more work-related and general health problems, including back pain, upper extremity muscle pain, lower extremity muscle pain, and general fatigue. Agricultural workers showed lower satisfaction with their work environment than general workers. Factors affecting one or more work-related health problems included gender, working years, hazardous factors, irregular work pattern, working hours, and labor intensity. Conclusions: Our findings showed that agricultural workers were relatively more vulnerable to safety issues compared to other occupational groups. Therefore, it is necessary to establish standardized safety and health standards and strengthen systematic safety and health management policies and services for agriculture.

• Journal of the Korean Society of Safety
• /
• v.23 no.4
• /
• pp.72-78
• /
• 2008

In any form of construction work, it is essential that accidents be prevented at every stage from foundation preparation to build completion. For this, it is necessary to use models that can assess risk and provide instruction for safe work processes so that the risk of accidents is reduced. Currently, however, very few models can perform these tasks. In this paper, we presents a model that assesses risk quantitatively by analyzing risk factors involved in stage of construction such as foundation work, erection work, structural work, equipment work, finishing work and etc work. The model performs assessment based on examples of accidents and by investing actual conditions during construction. In addition, we presents in this paper a safety management system was developed to assess risk during construction and to effectively train laborers.

• Journal of the Korean Statistical Society
• /
• v.28 no.1
• /
• pp.125-133
• /
• 1999

We consider a FIFO single-server queueing model in which both the arrival and service processes are modulated by the amount of work in the system. The arrival process is a non-homogeneous Poisson process(NHPP) modulated by work, that is, with an intensity that depends on the work in the system. Each customer brings a job consisting of an exponentially distributed amount of work to be processed. The server processes the work at various service rates which also depend on the work in the system. Under the stability conditions obtained by Browne and Sigman(1992) we derive the exact stationary distribution of the work W(t) and the first exit probability that the work level b is exceeded before the work level a is reached, starting from x$\in$[a, b].

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.4
• /
• pp.15-25
• /
• 2018

The accident risk at the construction workplace associated with agricultural engineering is comparatively higher than those of other fields due mainly to its complex work types and processes. Agricultural engineering deals with a variety of agricultural infrastructures from irrigation and drainage facilities to giant-scale coastal reclamation land infrastructures. The characteristics that most agricultural projects have conducted on a small-scale even worsen the situation drawing low attentions to risk management. Therefore, systematical risk assessment that focuses on details of agricultural construction work process is required in order to enhance safety management capacity and to prevent repetitive accidents ultimately. This study aims to categorize construction work types and processes of agricultural construction works, and to quantitatively assess the accident risk of them based on accident analysis. Regarding classification of construction works, actual 827 accident cases were thoroughly reviewed and coded by their construction site, facility and work type, project scale and so on. Most accidents (71.8 % of total cases) occurred in small-scale construction workplaces with less than 5 billion Korean won project budget. And those accidents related to agricultural infrastructure project (37.4%) and agricultural water development project (22.4%). In terms of work types, accidents frequently took place in form-work followed by pipe installation work, steel bar work and concrete work. The potential risks were compared with actual outbreak of accidents based on Analytic Hierarchy Process (AHP). The results show that the potential conditions of accident expected to be took place is somewhat different from the actual conditions where accidents actually happened. This implicates that risk management manuals or education needs to be adjusted by reflecting unexpected circumstances. Overall, this study is meaningful in that the results could be foundations as to strengthen risk management capacity for agricultural engineering projects.