• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.12
• /
• pp.6550-6557
• /
• 2013

The public road construction projects awarded by the regional construction and management office, which is an affiliate of the Ministry of Land, Infrastructure and Transport, are managed by construction supervision officers. These officials frequently visit a large number of construction sites to conduct inspections and supervision tasks. Therefore, the site management efficiency is essential in terms of the time and money spent in travelling to the sites. The introduction of a site monitoring management system is considered necessary to minimize the number of site visits and enable remote monitoring of the construction progress to enhance the business efficiency of the construction supervision officers. In this study, a remote site monitoring system was constructed using web cameras for public road construction works. The trial applications were implemented by selecting ten constructions sites. The effectiveness of the system was analyzed to assess its applicability. In an assessment of the applicability of the verification results, remote site monitoring showed cost savings of approximately 35% compared to the existing site management. The guidelines for applying the site monitoring management system were provided, the introduction plan was investigated, and the improvement method was presented. The results showed that the system is likely to minimize the unnecessary site visits, remove the risk factors at vulnerable areas in the sites beforehand, and prevent a range of disasters and accidents. In addition, the quality of the infrastructures is likely to improve through the prevention of accidents and the elimination of substandard and faulty construction work.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.12
• /
• pp.69-75
• /
• 2019

The cooling performance of heat pump system for light-duty commercial electric vehicle was evaluated experimentally. The cooling performance characteristics of the heat pump for light-duty commercial electric vehicles were evaluated by varying the temperature, flow rate of chiller coolant, and electric compressor speed, under the exterior air temperature of 35 ℃ and interior air temperature of 25 ℃. Increasing the compressor speeds decreased the cooling system efficiency by 16.4 % on average with the cooling capacity increasing by 8.0 % on average and the compressor work increasing by 27% on average. To use waste heat from the coolant to chill power electronic components, such as the motor and inverter, a chiller was installed to transfer heat between the coolant and refrigerant. Increasing the temperature of the chiller coolant from 35 ℃ to 55 ℃ decreased the efficiency by 18.2 % on average due to higher condensing heat source. Increasing the coolant flow rate from 10 liter/min to 20 liter/min did not affect the cooling capacity of the system due to a similar total condensing heat transfer rate at the chiller and the exterior heat exchanger. In future works, heating performance will be investigated by varying the operating conditions to use the chiller's waste heat with an improvement of heating capacity.

• Journal of the Korean Vacuum Society
• /
• v.22 no.1
• /
• pp.13-19
• /
• 2013

It is expected that progress in building-integrated photovoltaic (BIPV) systems, improving the functionality and design of buildings, will be accelerated in the coming years. While the dye sensitized solar cell is considered one of the most important technologies in the BIPV field, the transparent silicon based thin film solar cell fabricated by thin film processes has drawn attention as a novel alternative. When the selective transmitting layer is applied to the solar cell, the conversion efficiency is improved due to the re-reflection of infrared light into an absorber layer with the transmission of visible light through the solar cell. In this work, we prepared Al-Ti based oxide thin films using cost-effective sputter deposition and examined their selective transmitting characteristics with various compositions. The transmittance and reflectance of the Al-Ti based oxide thin film changed with the variation of its composition, and the selective transmitting property was observed in the sample with the 25 nm-thick AlTiO layer. It is considered that the realization of transparent solar cells and the improvement of their conversion efficiency can be achieved by introducing the Al-Ti based selective transmitting layer.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.947-954
• /
• 2009

This paper proposed a new balanced power amplifier using the reflected input of conventional balanced power amplifiers composed of branch line hybrid coupler. In general, the single-ended amplifier in balanced amplifiers does not have the perfect matching, so the reflected input power, in other words the leakage power, is terminated conventionally at the isolation port of hybrid coupler. However in this work, the leakage power is injected into the auxiliary amplifier, and its output power is combined to the output power of balanced amplifier. Therefore output power, efficiency, and 2-tone IMD3 performances of the proposed balanced amplifier are highly improved compared to the conventional balanced amplifier. For the verification of the proposed balanced amplifier, a conventional balanced amplifier and the proposed balanced amplifier are designed, fabricated and measured, and the measured results are compared. The proposed balanced amplifier shows the improvement in the output power(Pout), power added efficiency (PAE), and 2-tone IMD3 by 3dB, 5.2%, and $5{\sim}10dBc$, respectively, from the measurement.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.5
• /
• pp.32-42
• /
• 2018

Since the success or failure of VE projects depends on the capabilities of participants, including owners, construction managers, architects, general contractors and VE experts, it is important to follow systematic procedures. However, it is often the case that only a rough evaluation is performed, or the rough and detailed evaluations are integrated in actual VE tasks. In this case, it is difficult to analyze and evaluate the alternatives in terms of risk, even for the important alternatives. This in turn leads to the so-called returning alternatives where the alternatives proposed in the preceding stage are returned to the original plans in the following stage, and thus the repetitive work for the alternatives often decreases the efficiency of the VE task. In this regard, this study proposed a risk assessment process for VE alternatives in order to minimize the occurrence of returning alternatives based on the systematic analysis and evaluation of VE alternatives. It will increase the efficiency of VE tasks by reduces the number of regression alternatives.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.188-196
• /
• 2021

Korea has invested heavily in projects related to national rivers, but there is no evaluation technique and system to manage river projects that can evaluate the effectiveness of the river projects after they are completed. Their absence leads to the inability of information on river construction sections, analysis of project effects, and benchmarking between projects. This may cause over-budget, overlapping investment problems due to the implementation of similar projects in the same section, and incorrect business elements may be repeatedly utilized. In order to solve this shortcoming, this study developed river project evaluation techniques and a river project (construction) management system. The development of evaluation techniques enables comparison and analysis between projects and can be utilized in establishing maintenance plans. The system can also provide inquiry of construction information, visualization of construction, and management of performance items. In this study, the evaluation techniques developed through prior research were modified and supplemented, and the effectiveness was verified by applying them to national river projects in A river and B river. It is expected that the evaluation techniques and system utilization measures presented will increase the work efficiency of river projects and enhance the efficiency of river projects.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.2
• /
• pp.135-142
• /
• 2021

In this work, multi-turn wings and guide plates are installed on recycled aggregate crushing devices to improve existing low recycled aggregate quality. Simulation analysis to evaluate the crushing efficiency of the new device shows enhanced crushing efficiency since the installation of guide plates shreds most of the inputs inside the crushing drum, and the multi-turn wings and guide plates induce rebound and circulation of the aggregate. Through this, the new device was found to be more economical and efficient than the existing recycled aggregate crushing device. Also, the amount of cement paste and mortar attached to the surface of the aggregate was smaller than that of the existing recycled aggregate, and it was found that the mechanical properties and elastic modulus deterioration were reduced. However, the carbonation resistance of concrete was not improved to the level of natural aggregates due to the remaining tiny cement paste and mortar on the surface of the new recycled aggregate. Therefore, it is deemed necessary to further research and experiment such as device improvement or binder development to reduce durability degradation of concrete mixed with new recycled aggregate.

• Journal of Technologic Dentistry
• /
• v.31 no.1
• /
• pp.37-54
• /
• 2009

The purpose of this thesis is to address the imbalance between supply and demand of dental lab technicians and to propose its solutions by analyzing the improvement of employment rate of graduates of dental technology schools in Daegu area and the supply and demand of the technician workforce. Preliminary and full-scale surveys were performed from Aug. 10 to Oct. 10 in 2008 on 150 junior students of dental technology schools who finished their on-the-job-training and 150 dental technicians who were working for dental laboratory in Daegu by self-assessment questionnaire. Followings are the findings of this study. First, regarding the gender of the dental technicians, 32.7% of respondents were female 67.3% were male. Concerning age, respondents younger than 29 years-old occupied the highest percentage(39.3%). With respect to the lab technology school they graduated, DaeguHealthCollege took the largest proportion of 87.3%. With regard to interpersonal relationship at the school, 58.0% of respondents felt their relationship 'smooth'. Second, about the motive of choosing to be a lab technician, the biggest proportion of the respondents(34.7%) replied that 'because it is professional'. Regarding the degree of satisfaction about the profession, 'so-so' was the answer with the biggest percentage(51.3%) followed by 'satisfied'(32.0%) and 'unsatisfied'(16.7%). It showed that respondents were generally satisfied with their major. Third, regarding relevance of on-the-job-training with 'preparation for the employment', highest percentage of both students and lab technicians(50.0%) replied 'so-so'. With respect to 'necessity of practical education', highest percentage of the students and lab technicians replied 'relating didactic education in college to the real world' with 52.7% and 40.7% respectively. With regard to 'the aim of on-the-sport-training', 'practical training of didactic education' was chosen by 54.0% and 47.3% respectively. Fourth, with regard to the 'types of college education advantageous for the employment', both students and lab technicians groups chose 'practical training' with the highest percentage. Concerning 'helpfulness of clinical training on employment', students answered 'so-so' and 'helpful' by 50.0% and 42.7% respectively and dental technicians replied similarly by 50.0% and 46.0% respectively. Fifth, with regard to the influence of financial factors on the supply and demand of dental technician(question #1), 68.0% of respondents agreed that 'salary plays key role in the supply and demand of the work force'. Concerning the question about working condition, respondents requested better working environment. With reference to interpersonal relationship at the laboratory, respondents replied that interpersonal relationship affects the duration of the employment it was found out that there were many conflicts with colleagues or dental office. Sixth, regarding the satisfaction about their profession according to the characteristics of the respondents more respondents were 'satisfied'(10.30 points) with their profession and 'unsatisfied' were 9.47 points and the difference was statistically significant(p<0.05). According to the findings of this study, practical education on campus and on-the-job-training are as important as didactic education at class due to the characteristics of dental technology major. It was found that more practical training is related to higher employment rate. Therefore, efficiency of on-the-job-training by college education should be increased raise employment rate of the graduates and reduce the unemployment. Up-to-date information needs to be promptly delivered and future vision should be presented to the students to raise their satisfaction about the profession. In addition, to reduce dental technician's frequent change of their workplace after facing with the reality of the profession after graduation, related organizations should make an effort to present better future than now.

• Journal of dental hygiene science
• /
• v.15 no.3
• /
• pp.265-271
• /
• 2015

This study has an objective not only to be helpful to the understanding about students' career and employment preparation by investigating the present conditions which are related with vocational consciousness and job values of dental hygiene department graduating students. Study subjects were 350 female graduating students in 3-year-course College, dental hygiene department at five areas of Seoul, Gyeonggi, Gangwon and Gyeongnam. Data were analyzed using IBM SPSS Statistics ver. 19.0. Regarding job values, job prospect of dental hygienist is a little developmental (55.2%) and institution hoping to work is dental clinic (43.2%), reasons for employment in major area are good wage and working environment (24.0%). And regarding opinion about job, dental hygienist job is a measure for living income (69.7%). Regarding job selection conditions, 35.0% subjects replied good human relationship. In the questionnaires regarding professional job in vocational consciousness category, results showed high percentages in that 'the occupation is a job in charge of oral health improvement'; regarding academic area, 'scaling should be done better than dentist'; regarding human relationship, 'harmony between colleagues is closely related with job efficiency'; regarding work ethics, 'development of dental hospital (clinic) and dental hygienist is correlated.' In vocational consciousness of study subjects, higher major satisfaction showed significant differences in professional job consciousness and work ethics consciousness (p<0.05) and the correlation results in vocational consciousness areas showed all statistically significant correlations (p<0.01). In case that the characteristic in one type is higher among 4 types, all other types showed high characteristics and also showed high general vocational consciousness.

• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.2
• /
• pp.91-102
• /
• 2008

Purpose: To enlarge the efficiency of operation and establish a constituency for development of new radiotherapy treatment through database which is established by arranging and indexing radiotherapy related affairs in well organized manner to have easy access by the user. Materials and Methods: In this study, Access program provided by Microsoft (MS Office Access) was used to operate the data base. The data of radiation oncology was distinguished by a business logs and maintenance expenditure in addition to stock management of accessories with respect to affairs and machinery management. Data for education and research was distinguished by education material for department duties, user manual and related thesis depending upon its property. Registration of data was designed to have input form according to its subject and the information of data was designed to be inspected by making a report. Number of machine failure in addition to its respective repairing hours from machine maintenance expenditure in a period of January 2008 to April 2009 was analyzed with the result of initial system usage and one year after the usage. Results: Radiation oncology database system was accomplished by distinguishing work related and research related criteria. The data are arranged and collected according to its subjects and classes, and can be accessed by searching the required data through referring the descriptions from each criteria. 32.3% of total average time was reduced on analyzing repairing hours by acquiring number of machine failure in addition to its type in a period of January 2008 to April 2009 through machine maintenance expenditure. Conclusion: On distinguishing and indexing present and past data upon its subjective criteria through the database system for radiation oncology, the use of information can be easily accessed to enlarge the efficiency of operation, and in further, can be a constituency for improvement of work process by acquiring various information required for new radiotherapy treatment in real time.