• Elastomers and Composites
• /
• 제46권3호
• /
• pp.223-230
• /
• 2011

본 연구에서는 자원 재활용 측면에서 매트릭스수지로 재활용플라스틱과 보강재로 친환경 천연섬유로 구성된 그린복합재료를 제조하고 그 특성을 탐구하였다. 먼저 재활용폴리에틸렌과 천연섬유인 목분을 이용하여 이축 압출공 정 방법으로 목분함량이 서로 다른 펠렛을 제조하였다. 이 펠렛을 사용하여 압축성형 방법으로 목분/재활용폴리에틸렌 그린복합재료를 제조하고, 그들의 굴곡특성, 인장특성, 충격특성, 열변형온도 그리고 파단거동에 미치는 목분함량의 영향을 조사하였다. 결과는 목분/재활용폴리에틸렌 그린복합재료의 굴곡강도, 굴곡탄성률, 인장탄성률 및 열변형온도 는 목분함량이 증가함에 따라 크게 향상된 반면, 인장강도와 충격특성은 감소한다는 나타내었다. 주사전자현미경으로 관찰한 파단거동은 재활용폴리에틸렌의 유연한 파단현상과 비교하여 목분함량이 증가함에 따라 변화하는 충격거동 경향을 정성적으로 뒷받침해주었다.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.91-94
• /
• 2005

Polypropylene as a matrix has been used for wood polymer composites(WPC). In preparing WPC, the coupling agent, Polypropylene grafted Maleic Anhydride(PP-G-MA) was used in order to obtain a good interfacial bonding force between matrix and fillers and dispersion of wood powders. In this study, the effects of wood powder contents and water absorption on the mechanical properties were experimentally investigated. The tensile strength and flexural strength of composites reached its peak value when the wood powder content was around 60 wt%. However, the peak value of the impact was observed about 30 wt% of wood powder content. The tensile strength and flexural strength increase with increasing the wood power contents. But the impact strength decrease with increasing the wood powder contents. The slight change was observed with the water absorption in the WPC. The optimal condition of the compositions such as Anti-oxidant and UV stabilizers for the outdoor application was suggested in this research.

• 폴리머
• /
• 제36권5호
• /
• pp.573-578
• /
• 2012

일반적으로 목분/PVC 복합재가 갖는 대부분의 물리적 특성은 소수성인 PVC와 친수성인 목분 사이의 낮은 계면결합력으로 인해 순수한 PVC에 비해서도 낮다. 그러므로 본 연구에서는 목분/PVC의 계면결합력을 향상시키기 위해 세 가지 아미노실란을 각각 사용하여 목분을 개질하였으며, 아미노실란으로 개질된 목분, 무중금속 PVC 컴파운드, 나노점토를 용융혼합하여 환경친화적인 목분/PVC/나노점토 복합재를 제조하였다. 목분의 아미노실란 개질 및 나노점토의 첨가가 복합재의 기계적 특성에 미치는 영향을 조사하였다. 복합재의 기계적 특성은 만능재료시험기, 아이조드 충격시험기, DMA, TMA를 이용하여 조사하였다. 아미노실란으로 개질된 목분을 이용한 복합재의 인장특성은 순수한 목분을 이용한 복합재의 인장특성보다 훨씬 높았다. 또한 적은 양의 나노점토가 복합재의 기계적 특성을 향상시켰다. 아미노실란으로 개질된 목분과 나노점토를 사용함으로써 목분/PVC 복합재의 성능이 크게 향상되었다.

• Composites Research
• /
• 제31권5호
• /
• pp.202-208
• /
• 2018

In this paper, mechanical and hygroscopic properties of teak sawdust and recycled polypropylene (RPP) composites are evaluated and compared with virgin polypropylene (VPP) matrix based composites. Verities of composites are prepared by variation in the plastic types, wood plastic ratio and the addition of coupling agent in the formulations. Mixing of wood sawdust and polypropylene is done by a twin screw extruder, and then sheets of wood plastic composites (WPCs) are produced by using the compression molding method. The results show that recycled matrix composites exhibit better tensile, flexural strength with low impact strength than virgin matrix based composites. Recycled composites show low water absorption and thickness of swelling than virgin matrix based composites. The results confirm that wood content in the polymer matrix affects the performance of composites while presence maleated polypropylene (MAPP) improves the properties of the composites significantly. Developed RPP matrix composites are as useful as VPP matrix composites and have the potential to replace the wood and plastics products without any adverse effect of the plastics on the environment.

• Journal of the Korean Wood Science and Technology
• /
• 제34권5호
• /
• pp.59-66
• /
• 2006

The thermal properties of wood flour, Hwangto, and maleated polyethylene (MAPE) reinforced HDPE composites were investigated in this study. The thermal behavior of reinforced wood polymer composites was characterized by means of thermogravimetric (TGA) and differential scanning calorimetric (DSC) analyses. Hwangto and MAPE were used as an inorganic filler and a coupling agent, respectively. According to TGA analysis, the increase of wood flour level increased the thermal degradation of composites in the early stage, but decreased in the late stage. On the other hand, Hwangto reinforced composites showed the higher thermal stability than virgin HDPE, from the determination of differential peak temperature ($DT_p$). Decomposition temperature of wood flour and/or Hwangto reinforced composites increased with increase of heating rate. From DSC analysis, melting temperature of reinforced composites little bit increased with the addition of wood flour or Hwangto. As the loading of wood flour or Hwangto to HDPE increased, overall enthalpy decreased. It showed that wood flour and Hwangto absorbed more heat energy for melting the reinforced composites. Hwangto reinforced composites required more heat energy than wood flour reinforced composites and virgin HDPE. Coupling agent gave no significant effect on the thermal properties of composites. Thermal analyses indicate that composites with Hwangto are more thermally stable than those without Hwangto.

• Journal of the Korean Wood Science and Technology
• /
• 제32권6호
• /
• pp.67-73
• /
• 2004

The influence of liquefied wood (LW) on the mechanical and thermal properties of liquefied wood-polymer composites (LWPC) was investigated in this study. The thermal behaviors of LWPC were characterized by means of thermogravimetric (TGA) and differential scanning calorimetric (DSC) analyses. LW showed significant effects on the mechanical strength properties. The increase of flexural MOE and Young's modulus was related to the increase of stiffness of LWPC. The effect of LW was also significant on the flexural and tensile MOR. The impact strength decreased with the increase of LW application level. With the increased stress concentration by the poor bonding between LW and polymer, the impact strength of LWPC decreased, compared with that of high-density polyethylene (HDPE). The thermal stability of LWPC decreased with the increase of LW content up to 40%. The melting temperature of HDPE decreased with the increase of LW loading level. Enthalpy of HDPE also decreased with the addition of LW. This study proves the thermal stability necessary for the consolidation of composition materials.

• 자원리싸이클링
• /
• 제8권4호
• /
• pp.57-63
• /
• 1999

재활용된 농업용 폐비닐과 목재부산물로부터 Wood-Polymer Composites (WPC)을 만들었으며, 또한 LLDPE 및 혼합 polyethylene으로 만들어진 WPC와 비교하였다. 접착성 향상제로 maleic anhydride를 사용하였으며, 이의 개시제로 dicumyl peroixde를 첨가하였다. 접착성 향상제로 maleic anhydride를 사용하였으며, 이의 개시제로 dicumyl peroixde를 첨가하였다. 제조된 WPC의 물성은 인장강도 시험으로 측정하였으며, 목재 및 접착성 향상제의 첨가량에 따라 분석하였다. 또한 파단면을 SEM을 이용하여 분석하였다. 목재의 양이 증가함에 따라 WPC의 신율은 감소하고, 탄성율은 증가하였다. 하지만 인장강도는 MA가 첨가된 경우에만 증가하였으며, MA 1% 첨가로 크게 증가하였지만 더 이상의 첨가는 효과가 없었다. 농업용 재활용 비닐로 제조된 WPC의 물성은 구매된 PE 수지로 제조된 WPC와 비슷한 값을 보였다.

• Journal of the Korean Wood Science and Technology
• /
• 제27권2호
• /
• pp.15-22
• /
• 1999

진동 충격음 흡수성능을 지니는 샌드위치구조 목질 복합재료 제조용 폴리머는 넓은 온도범위(또는 주파수 범위)에서 높은 손실계수를 지니면서, 동시에 $5{\times}10^7\sim-10^9\;dyne/cm^2$의 탄성율을 지녀야 한다. 본실험에서는 이러한 점탄성 거동율 나타내는 고분자재료의 제조를 목적으로 에폭시 수지/아크릴 수지 상호침투망목고분자(IPNs)를 동시망목형성법으로 합성하였다. 고분자의 동적 점탄성은 Rheovibron을 사용하여 110Hz에서 측정하였으며, 복합체의 손실계수 및 동탄성 계수는 Rheovibron을 개조한 양단지지 강제 휨 진동법으로 주파수 110Hz에서 측정하였다. 동력학적 측정 결과, 손실탄성율의 최대값 온도 및 손실계수의 최대값 온도가 이동하고, 유리전이 영역이 확대되어, 이 IPNs계는 부분 상용계임을 알 수 있었다. 특히, 70/30 및 50/50 조성의 Epikote871/P(n-BMA) IPNs는 넓은 온도 범위에서 비교적 높은 손실계수 및 적당한 탄성율을 나타냈다. 또한 이를 적층한 목질 복합체는 넓은 온도 범위에서 비교적 높은 진동흡수 계수를 나타냈다.

• Journal of the Korean Wood Science and Technology
• /
• 제21권2호
• /
• pp.31-37
• /
• 1993

Composites of styrene polymers with woody fibers were prepared, and the effect of compatibilizers on their mechanical properties was evaluated. To improve the compatibility of wood fibers and the matrix polymers, styrene-maleic anhydride copolymer(SMA) and maleic anhydride-modified polymers were used as compatibilizers. As results, maleic anhydride-modified polystyrene and SMA were proved to improve the tensile strength of the molded composites, and also were evaluated as good compatibilizers for the wood fiber polystyrene composite. Cellulosic fiber (dissolving pulp) provided better reinforcement than lignocellulosic fiber(thermomechanical pulp). On the contrary in the case of the composite of wood fiber and acrylonitrile-butadiene styrene copolymer(ABS), SMA and maleic anhydride-modified acrylonitrile-butadiene-styrene copolymer(MABS) did not act as compatibilizers. However, MABS was evaluated as a good polymer matrix to make wood fiber reinforced composite. The tensile properties of the composites of wood fiber and MABS were superior than those of wood fiber-ABS composites.

• Composites Research
• /
• 제20권2호
• /
• pp.32-38
• /
• 2007

Natural fibers can refer to all types of fibres only produced by nature. Their lengths vary from particles to long strands. Natural fibers are categorized roughly by six types, depending on the types of sources; base, leaf, seed, grasses, fruit and wood. Of these fibers, jute, flax, sisal and ramie are the most commonly used as reinforced materials in preparing polymer composites. In development and improvement of these composites, many studies have been implemented to overcome the drawbacks such as incompatibility, moisture problems and so on. The range of industry sectors of natural fiber-reinforced polymer composites becomes more extensive gradually and many of the companies all over the world are engaged in fabrications or applications. This paper mainly discussed the recent status of the domestic/overseas market and research issues of natural fiber-reinforced polymer composites. We made an exception of wood-polymer composites market which have played a great role because they had been often dealt with.