• 제목/요약/키워드: Wiring

검색결과 524건 처리시간 0.022초

LPG 자동차의 긴급차단밸브 기상필터막힘, 솔레노이드밸브 조립부손상, LPG 스위치 커넥터 핀 접촉불량에 관련된 고장사례 연구 (Study for Failure Examples Including with Gas filter Clogging of Emergency Cutting Valve, Assemblying Part Damage of Solenoid Valve, Contact Damage of LPG Switch Connector Fin in a LPG Car)

  • 이일권;국창호;함성훈;김지현;김성모;정동화;유창배;문학훈;이정호
    • 한국가스학회지
    • /
    • 제26권1호
    • /
    • pp.1-6
    • /
    • 2022
  • 이 논문은 LPG 자동차 엔진의 시동불량현상을 조사하고 분석한 연구이다. 첫 번째 사례는 긴급차단 밸브를 점검한 결과 밸브의 기상측에 미세한 이물질에 의해 필터 막힘으로 인해 연료공급이 안 되는 현상을 확인하였다. 두 번째 사례는 액·기상 솔레노이드 밸브의 초기 작동시 연료의 누설에 영향이 없었으나, 시간이 지나면서 솔레노이드 조립부의 손상부가 내구성이 떨어져 LPG 가스의 누설이 진행되어 연소실로 공급되는 연료의 공급이 제대로 되지 않아 자동차의 시동꺼짐 현상이 발생된 것을 확인하였다. 세 번째 사례는 EGR 10A 퓨즈와 LPG 스위치 사이의 커넥터 핀이 장력불량에 의한 접촉불량으로 과열이 발생되어 소손된 것을 확인하였다. 따라서, 자동차의 시동성에 대단히 예민한 전기적인 문제가 발생하지 않도록 자동차의 관련시스템을 사전에 철저하게 점검하고 이를 관리하여야 할 것으로 판단된다.

유연소자용 기판과의 접착 특성에 따른 구리 배선의 압축 피로 거동 및 신뢰성 (Reliability of Cu Interconnect under Compressive Fatigue Deformation Varying Interfacial Adhesion Treatment)

  • 김민주;현준혁;허정아;이소연
    • 마이크로전자및패키징학회지
    • /
    • 제30권4호
    • /
    • pp.105-111
    • /
    • 2023
  • 차세대 전자기기는 기계적인 굽힘이나 말림(rolling) 변형이 반복적으로 가능한 형태로 발전하고 있다. 이에 따라 전자기기 내부 소자들 간의 연결을 위한 금속 배선의 기계적인 신뢰성 확보가 필수적이며, 특히, 실제 사용 환경을 모사한 압축 환경에서의 굽힘 피로 변형에 대한 신뢰성 평가가 중요하다. 본 연구에서는 구리(Cu)와 폴리이미드(Polyimide, PI) 기판 간의 접착력을 향상시키고, 굽힘 피로 변형 환경에서 구리 배선의 신뢰성을 높이기 위한 방법을 탐구했다. 접착력 향상을 위해 폴리이미드 기판에 산소 플라즈마 처리와 크롬(Cr) 접착층 도입이라는 두 가지 방법을 적용하고, 이들이 압축 상황에서의 피로 거동에 미치는 영향을 비교 분석했다. 연구 결과, 접착력 향상 방법에 따라 압축 피로 거동에서 차이가 발생하는 것을 확인했다. 특히, 크롬 접착층을 도입한 경우 1.5% 변형률에서는 크랙 생성이 주된 변형 메커니즘이며, 피로 특성이 취약한 결과를 얻었으나, 2.0%의 높은 변형률에서는 플라즈마 처리법에 비해 박리가 발생하지 않아 가장 개선된 피로 특성을 나타냈다. 본 연구의 결과는 유연 전자기기의 사용 환경에 적합한 피로 저항 개선법을 제시하고, 크랙 발생 정도를 포함한 전자기기의 신뢰성 향상에 중요한 정보를 제공할 수 있을 것으로 기대한다.

"선영문법(鮮英文法)"에 나타난 음성학 연구 방법에 대한 고찰 (The Study of Phonetic Research Methodology in Korean English Grammar)

  • 김형엽
    • 인문언어
    • /
    • 제7집
    • /
    • pp.291-309
    • /
    • 2005
  • It hasn't been long time since English language was introduced in Korea. At the end of the 18th century the importance of the way of using English properly started to be recognized as Chosun (former country in Korean peninsula) began to conclude a treaty with foreign countries. A lot of Koreans could learn the western culture by the acquired knowledge of English. One of the main factors opening the secluded nation to the world was the member of missionary from outside of Korea. As the number of missionaries increased those who already came to Korea found the necessity of wiring a sort of guidebook of Korean language for the newly dispatched missionaries. The book $\ulcorner$Korean English Grammar$\lrcorner$(written by Horace Grant Underwood in 1890), was the first one that linguistically compared the part of speech and the clausal structures of Korean and English. The revised one of the same book was written by the son, Horace Horton Underwood, in 1914. The revised one newly included the phonetic aspect of Korean language. In this paper the phonetic part of the book will be considered carefully in order to find how recent phonetic methodology has been applied to account for the Korean phonetic features.

  • PDF

공공임대주택 구성재의 적정 수선주기 산정 연구 (Establishment of the Optimal Repair Cycle of the Components of the Rental Housing)

  • 이태경;채창우;이강희
    • KIEAE Journal
    • /
    • 제12권5호
    • /
    • pp.29-34
    • /
    • 2012
  • A rental housing has a key role to supply the living space to non-ownership. A public rental housing is particularly aimed at providing the living space for the low-income households with a low rent fee. Therefore, the local government would try to maintain the facilities of the rental housing and to get the decent living condition. For getting the required living condition, it should make a maintenance plan, which contains the repair time, repair scope and targeted component and finishings. This study is aimed at providing the optimal repair time in 12 components and components of the rental housing which is controlled by the local government. The optimal repair time has two steps to get the final result. First, it would draw the 1'st repair time with the probabilistic and empirical approach. Second, comparing the drawn data and the service life, the optima repair time would be provided with considering the components' attributes. Result are as follows : First, the optimal repair time would be considered with the component attributes. There are user's convenience, its safety and physical aspect. Second, the kitchen utensils, elevator and water tap has a optimal time of 16, 19, 17 years respectively which is considered with physical aspect. In addition, the optima repair time of the wiring appliance and lighting equipment are 12 years and 10 years respectively.

Mold-Flow Simulation in 3 Die Stack Chip Scale Packaging

  • Rhee Min-Woo
    • 한국마이크로전자및패키징학회:학술대회논문집
    • /
    • 한국마이크로전자및패키징학회 2005년도 ISMP
    • /
    • pp.67-88
    • /
    • 2005
  • Mold-Flow 3 Die Stack CSP of Mold array packaging with different Gate types. As high density package option such as 3 or 4 die stacking technologies are developed, the major concerning points of mold related qualities such as incomplete mold, exposed wires and wire sweeping issues are increased because of its narrow space between die top and mold surface and higher wiring density. Full 3D rheokinetic simulation of Mold flow for 3 die stacking structure case was done with the rheological parameters acquired from Slit-Die rheometer and DSC of commercial EMC. The center gate showed severe void but corner gate showed relatively better void performance. But in case of wire sweeping related, the center gate type showed less wire sweeping than corner gate types. From the simulation results, corner gate types showed increased velocity, shear stress and mold pressure near the gate and final filling zone. The experimental Case study and the Mold flow simulation showed good agreement on the mold void and wire sweeping related prediction. Full 3D simulation methodologies with proper rheokinetic material characterization by thermal and rheological instruments enable the prediction of micro-scale mold filling behavior in the multi die stacking and other complicated packaging structures for the future application.

  • PDF

Implementation of On-site Audio Center based on AoIP

  • Lee, Jaeho;Kwon, Soonchul;Lee, Seunghyun
    • International journal of advanced smart convergence
    • /
    • 제6권2호
    • /
    • pp.51-58
    • /
    • 2017
  • Recently, rapid advances of Ethernet and IP technology have brought many changes in the sound industry. In addition, due to AoIP-based audio transmission technology, various problems of the acoustic system (sound quality deterioration due to long distance transmission, complicated wiring) have improved dramatically. However, when many distributed audio systems are connected with AoIP equipment, if there is a problem in the equipment, it is impossible to operate the connected system. AoIP equipment only can transmit audio signals but cannot adjust the system for acoustic environment. In this paper, AoIP equipment is to be installed with sound equipment on a one-to-one basis, so that various existing problems can be solved and adjustment of sound quality (reverberation, echo, delay and EQ) can be possible by AoIP-based OAC (On-site Audio Center) with built-in DSP function. As a result, uncompressed real-time transmission by distributed transmission/receipt module in OAC (On-site Audio Center) and high quality sound by adjustment of sound quality with built-in DSP can be acquired. It is expected that OAC based sound system will be the industry standard in ubiquitous environment.

PLC 통신 선로 시험 시뮬레이터 개발 (Development of PLC Communication Line Test Simulator)

  • 구자일
    • 전자공학회논문지
    • /
    • 제54권4호
    • /
    • pp.122-128
    • /
    • 2017
  • 건설 중장비의 배선을 간소화하기 위하여 PLC(Power Line Communication)-CAN(Controller Area Network) 통신 모듈 연구가 활발히 진행되고 있다. PLC-CAN 통신 모듈이 개발되더라도 정상적인 동작여부를 판단할 수 있는 시뮬레이터가 필요하다. 본 논문에서는 PLC-CAN 통신 모듈의 상태를 측정할 수 있는 시뮬레이터를 설계 및 개발하였다. 시뮬레이터 개발을 위해 전력선로 특성 분석 및 중장비의 잡음을 측정하여 분석하였다. 전력선로 특성 분석을 통해 전력선 통신 주파수 대역에 대한 특성을 분석하였으며, 중장비 잡음 특성 파악을 위하여 일반 승용차와의 잡음 특성을 비교 분석하였다.

봉합결찰법을 이용한 골절된 상악동 전벽의 정복과 고정 (Reduction and Fixation Methods for Fractured Anterior Maxillary Sinus Wall Using Suture Tie)

  • 정현교;강재경;송정국;신명수;윤병민
    • 대한두개안면성형외과학회지
    • /
    • 제14권2호
    • /
    • pp.111-114
    • /
    • 2013
  • The anterior maxillary sinus walls are the most frequently injured sites in midfacial fractures. The maxillary sinus is a difficult surgical site for reduction and fixation due to its narrow surgical field, and has a chance of developing sinusitis when sufficient treatment is not given. In this study, the methods developed by the authors for managing such are introduced. Two small openings were made on both sides of the fracture line, then a suture knot was tied instead of wiring for reduction and fixation. Then an absorbable mesh was applied on top of the fracture site, with a suture knot for additional fixation. This method was applied on an actual patient, and it was a convenient method despite the narrow surgical field that was provided. The authors believe that using suture knots to fixate fractured segments and absorbable mesh is relatively convenient and economically efficient when it comes to the reduction and fixation of the maxillary sinus wall fracture with several fragments.

하악관절강직증처치를 위한 관절성형술 2예 보고 (REPORT OF 2 CASES OF ARTHROPLASTY IN TEMPOROMANDIBULAR ANKYLOSIS PATIENTS)

  • 김규식;남일우;김봉환;임성균;김수남
    • 대한치과의사협회지
    • /
    • 제10권3호
    • /
    • pp.145-148
    • /
    • 1972
  • The authors have observed and treated the two patients with true bony ankylosis of temporomandibular joint in 16 years old school boy and 24 years old korean male. The ankylosed patients were treated by condylectomy and arthroplasty such as resin condylar head graft having been made into acrylic resin. 1. In 16 years old school boy, temporoandibular ankylosis of left side was surgical_y approached by condylectomy including coronoid process and posterior border of ramus and resin condylar head graft by means of interosseous wiring. 2. In 24 years old korean male, bilateral temporomandibular ankylosis was treted by bilateral condylectomies and resin condylar head grafts. 3. The mouth opening has been continued as 3-5cm since 13 months and 8 months before and facial appearances were very excellent.

  • PDF

유도낙뢰를 고려한 항공기용 제어기 및 송수신기 개발 및 검증 (Development and Verification of Aircraft Controller and Transceiver Considering Lightning Induced Transient Susceptibility)

  • 서정원;박재수;윤창배;홍수운;정병구;신영준;하정완
    • 한국전자파학회논문지
    • /
    • 제29권8호
    • /
    • pp.583-593
    • /
    • 2018
  • 자연 대기에서 발생하는 낙뢰는 항공기에 용융, 소손 및 아크 등의 물리적인 손상을 발생시킬 뿐만 아니라, 낙뢰의 관통 과정에서 발생하는 기체 외부의 자기장은 기체 내부의 전자장비 및 배선에 전압 및 전류 과도현상을 발생시킨다. 이러한 효과는 항공기 내부의 항공전자시스템에 유도낙뢰를 발생시켜 안전한 비행을 불가능하게 한다. 본 논문에서는 표준감항인증 요구도를 만족하는 보호회로 설계 기법과 공인인증된 시험 결과를 소개하였다.