• Journal of the Semiconductor & Display Technology
• /
• v.13 no.4
• /
• pp.59-63
• /
• 2014

Previous studies have selected wireless power transmission system using 2.45 GHz of ISM band, but the researches for 5.8 GHz microwave wireless power transmission have been relatively rare. The 5.8 GHz has some advantages compared with 2.45 GHz. Those are smaller antenna and smaller integrated system for RFIC. In this paper, the 5.8 GHz wireless power transmission system was developed and transmission efficiency was measured according to the distance. A transmitter sent the amplified microwaves through an antenna amplified by a power amplifier of 1W for 5.8 GHz, and a receiver was converted to DC from RF through a RF-DC Converter. In the 1W 5.8GHz wireless power transmission system, the converted currents and voltages were measured to evaluate transmission efficiency at each distance where LED lights up to 1m. The RF-DC Converter is designed and fabricated by impedance matching using full-wave rectifier circuit. The transmission-efficiency of the system shows from 1.05% at 0cm to 0.095% at 100cm by distance.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.592-595
• /
• 2013

Advent of Wireless Sensor Networks (WSN) has provided potentials to a variety of construction applications. It is well appreciated that WSNs have advantages over traditional wired system, such as ease of installation and maintenance with increased cost savings and efficiencies. However, the obstruction of wireless signal from physical objects in the heterogeneous construction environment often brings challenges to WSN measurement system. This paper analyzed the obstruction characteristic of construction environment where construction materials, equipment, and built structures obstruct the wireless signal yielding negative effect of measurement system. By adopting evaluation criteria, such as packet reception rate, field experiments have been implemented to quantitatively identify the interference of wireless signal from penetration, reflection, and network traffic under the construction environment. The results show that reliable performance of wireless sensor in construction environment depends on the optimal separation distance between a receiver and a transmitter, obstruction types, obstruction thickness, and transmission interval. In addition, the methodology and experimental results of this paper could be used in the practical design of network topology when hundreds of sensor nodes form a mesh network in the large scale construction applications.

• ETRI Journal
• /
• v.30 no.3
• /
• pp.377-382
• /
• 2008

A novel power amplifier for a polar transmitter is proposed to achieve better spectral performance for a wideband envelope signal. In the proposed scheme, 2-bit sigma-delta (${\Sigma}{\Delta}$) modulation of the envelope signal is introduced, and the power amplifier configuration is modified in a binary form to accommodate the 2-bit digitized envelope signals. The 2-bit ${\Sigma}{\Delta}$ modulator lowers the noise of the envelope signal by fine quantization and thus enhances the spectral property of the RF signal. The Ptolemy simulation results of the proposed structure show that the spectral noise is reduced by 10 dB in a full transmit band of the EDGE system. The dynamic range is also enhanced. Since the performance is improved without increasing the over-sampling ratio, this technique is best suited for wireless communication with high data rates.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.2
• /
• pp.222-227
• /
• 2012

In this paper, we analyze the total performance according to duty cycle of interfering transmitter in hetero systems. We analyze this criteria as a parameter for co-use when hetero systems share the same frequency channels. In order to make an analysis of relationship between duty cycle and performances of two systems. We take into consideration on the case that WiBro is an victim receiver and WLAN is a interfering transmitter. Analyzed coexistence results may be widely applied into the technique developed to get the coexisting condition for wireless devices using many communication protocols in same frequency.

• Journal of electromagnetic engineering and science
• /
• v.5 no.3
• /
• pp.132-139
• /
• 2005

Wireless bio-signal sensing system, which is based on the principle of Doppler radar, can measure a respiration and heart rates with a periodic movement of skin and muscle near the heart. Though the sensing monostatic system using a circulator has been studied, this bistatic system can be improved by using a circular polarized antenna which has a high isolation between transmitter and receiver. In this paper, we measured the bio-signal without the direct contact with the person. The design of each system and experimental results are discussed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.47-50
• /
• 2008

Multiple-input multiple-output (MIMO) is an efficient technology to increase data rate in wireless networks due to bandwidth and power limitations. Data transmission rate between transmitter and receiver is determined by channel capacity. MIMO has anadvantage of reliable communication over wireless channel because of utilizing the channel capacity properly. In this letter, we drive a new formula, closed form capacity formula, using confluent hypergeometric function.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1155-1160
• /
• 2011

The importance of broadband wireless communication implemented at subway tunnels is growing up. At 18GHz wireless video transmission system, the transmitter requires a digital modulation method. At subway tunnel, A 18GHz's influence of the multi-pass padding is strong. OFDM digital modulation that is strong for multi-pass padding is recommended. Duplexing methode uses FDD to transmit and receive broadband data at the same time. In the case of FDD we assign a private use channel each with the transmission at the receiving. In this paper, We implement multiple access wireless OFDM transceiver. We verified that one ground transceiver communicates with two car transceiver at the same time.

• Journal of electromagnetic engineering and science
• /
• v.15 no.3
• /
• pp.129-133
• /
• 2015

This paper presents the dosimetry of a resonance-based wireless power transfer (RBWPT) system for electric vehicles applications. The compact RBWPT system is designed to transfer power at 150-mm distance. The electric and magnetic fields generated by the RBWPT system and the specific absorption rate in the human body model, which stands around the system, are calculated. These analyses are conducted in two cases: the alignment and the misalignment between the transmitter and the receiver. The matching loops are adjusted to maximize the power transfer efficiency of the RBWPT system for the misalignment condition. When the two cases were compared for the best power transfer efficiency, the specific absorption rates (SAR) in the misalignment case were larger than those in the alignment case. The dosimetric results are discussed in relation to the international safety guidelines.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.481-484
• /
• 2003

OFDM(Orthogonall Frequency Division Multiplexing) is an efficient transmission techniques for the frequency selective fading wireless channel where conventional modulations suffer from severe performance degradation. Recently, more efficient techniques for the OFDM are paid much attention such as adaptive modulation for each subcarrier, since more bit rate has been required for the wireless data network [1-3]. The proposed system employs the adaptive modulation between transmitter and receiver in each subcarrier, where the bit and power is properly allocated. Also multiple antenna system called MIMO is considered, which result in robustness in channel delay, improved power efficiency and improved bit SNR for the given BER.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.11
• /
• pp.19-31
• /
• 1996

Spread spectrum method gurantees good performance in digital communication system under multi-path interference and jamming signals. The purpose of this paper is to develop the wireless modem using DS/SS techinque. The transceiver consists of a spread spectrum DQPSK transmitter and a mtching receiver. The system operates with the chipping rate set to 4 Mcps and the number of chips/symbol at 64, making the data rate 62.5 Kbps using QPSK modilation. The receiver section uses a digital matched filter for fast acquisition of burst signals and uses the comparing the BER of proposed system iwth that of narrow bnd system under various additive white gaussian noises. It is showen that the proposed sysem has better performance than narrow band system. When jamming signals is added to the suggested DS/SS system, we also show that the experimental performance (BER) of the suggested wireless modem is almost same as theroretical performance.