• 전력전자학회논문지
• /
• 제25권3호
• /
• pp.181-187
• /
• 2020

In this study, we propose a spherical flux concentration structure for omnidirectional wireless power transfer. Omnidirectional wireless power transfer technology is a method that can transmit power to a transmitter located in an arbitrary position in a two-dimensional or three-dimensional space. However, to improve the power transfer distance in a wireless power transfer system, the diameter of the coil or the number of windings must increase, thereby increasing the size of the transmitter. The proposed transmitter structure adds a ferrite core inside the transmitter coil so that the magnetic flux generated by the transmitter is directed toward the position of the receiver. As a result, the flux linkage and the mutual inductance increase. By implementing the omnidirectional wireless power transfer system using the proposed structure, the power transfer distance can be improved by 65% compared with the conventional system without increasing the size of the transmitter. Simulation shows that the proposed spherical flux concentration structure increases the mutual inductance of the omnidirectional wireless power transmission system.

• 한국항행학회논문지
• /
• 제9권2호
• /
• pp.121-130
• /
• 2005

본 논문에서는 항공관제용 VHF대역 무선 송신기 설계 제작에 관하여 연구하였다. 연구된 무선 송신기의 기본적인 성능은 기존 상용화된 관제용 무선 송신기의 사양을 만족하도록 설계 제작하였으며, 전력 증폭부의 교체만으로 출력 전력 25 W와 50 W가 모두 가능하고 AM 변조로 음성을 전송하는 것을 기본으로 한다. 본 논문에서 연구된 항공관제용 무선 송신기는 크게 4개의 모듈 즉, 전원부, 제어부, 저출력 송신부, 전력 증폭부로 구성되어 있으며, 전력 증폭부를 장착하지 않으면 1 W급 송신기로 동작하게 설계되었다. 연구된 항공관제용 무선 송신기는 CNS/ATM의 기본 요소로 사용되기에 충분한 시스템이라고 판단된다.

• Journal of Information Processing Systems
• /
• 제16권3호
• /
• pp.677-687
• /
• 2020

This paper deals with the electrical shock that can occur in a car wireless charging system. The recently released the Wireless Power Consortium (WPC) standard specifies that the receiver must be protected from the radio power generated by the transmitter and presents two scenarios in which the receiver may be subjected to electrical shock due to the wireless power generated by the transmitter. The WPC also provides a hardware approach for blocking the wireless power generated by the transmitter to protect the receiver in each situation. In addition, it presents the hardware constraints that must be applied to the transmitter and the parameters that must be constrained by the software. In this paper, we analyze the results of the electric shock in the vehicle using the WPC certified transmitter and receiver in the scenarios presented by WPC. As a result, we found that all the scenarios had electrical shocks on the receiver, which could have a significant impact on the receiver circuitry. Therefore, we propose wireless power transfer limit (WPTL) algorithm to protect receiver circuitry in various vehicle charging environments.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.625-636
• /
• 2019

This paper proposes an active leakage magnetic field (LMF) suppression scheme, which uses the dual-transmitter (DT) topology, for EV wireless charging systems (EVWCS). The two transmitter coils are coplanar, concentric and driven by separate inverters. The LMF components generated by the three coils cancel each other out to reduce the total field strength. This paper gives a detailed theoretical analysis on the operating principles of the proposed scheme. Finite element analysis is used to simulate the LMF distribution patterns. Experimental results show that when there is no coil misalignment, 97% of the LMF strength can be suppressed in a 1kW prototype. These results also show that the impact on efficiency is small. The trade-off between LMF suppression and efficiency is revealed, and a control strategy to balance these two objectives is presented.

• 한국통신학회논문지
• /
• 제30권9A호
• /
• pp.867-875
• /
• 2005

본 논문은 NRD 가이드를 이용하여 10km이상의 장거리 무선통신이 가능한 밀리미터파 대역용 FM 송신기 및 수신기를 제작하였다. 40GHz 사용주파수의 반파장 크기의 간격을 가지는 상하도체판 사이에 PTEE 유전체선로상에 건발진기, FM변조기 및 안테나로 구성된 FM 송신기를 제작하고, 동일한 간격을 가지는 상하도체판 사이에 국부발진용 건발진기, 밸런스믹서, 3dB 방향성결합기 및 안테나로 구성한 FM 수신기를 각각 제작하였다. 또한 제작된 FM송신기 및 수신기를 이용하여 무선통신 영상전송시험을 실시하였다. 이때 전송거리 10km의 시험거리에서 영상신호를 송신측에서 보낸 후 수신측의 TV 수상기를 통해 선명한 영상을 실시간으로 재생할 수 있었다. 이에 개발된 40GHz 대역 FM 송신기 및 수신기는 CATV의 전송이나 광대역 전송이 필요한 무선통신 시스템으로 사용이 가능하며, 장거리 초고속통신망의 연결 장치로 사용될 수 있을 것이다.

• 한국전자파학회논문지
• /
• 제14권9호
• /
• pp.936-943
• /
• 2003

초소형 무선내시경은 CMOS Image sensor, FPGA, LED, Battery,DC to DC Converter, Antenna 그리고 송신기로 구성되어 있다. 최대 전자파 노출규제, 시스템의기, 전력소모, 선형성 및 변조방법 등을 고려하여 지름 10 mm, 두께 2.3 mm인 FSK송신기를 설계, 제작 및 측정하였다. 제작된 송신기는 1.2 GHz 대역에서 동작하며, -3.67dBm의 출력전력, -99dBc/Hz(@100 KHz offset)의 위상잡음, -20.17 dBc의 고조파 억압을 나타내었다. 동물실험에서 제작된 무선내시경용 FSK 송신기는 만족할만한 성능을 나타내었다.

• 한국소음진동공학회논문집
• /
• 제22권9호
• /
• pp.845-852
• /
• 2012

Recently, wireless power transfer technology is ready to be commercialized in consumer electronics. It draws attention from not only experts but also public because of its convenience and huge market. However, previous technologies such as magnetic resonance and induction coupling have limited applications because of its short transfer distance compared to device size and magnetic intensity limitation on the safety of body exposure. As an alternative, ultrasonic wireless power transfer technology is proposed. The ultrasonic wireless power transfer system is composed of transmitter which converts electrical energy to ultrasonic energy and receiver which converts the ultrasonic energy to the electrical energy again. This paper is focused on the development of high energy conversion efficiency of ultrasonic transmitter. Optimal transfer frequency is calculated based on the acoustic radiation and damping effect. The transmitter is designed through numerical analysis, and is manufactured to match the optimal transfer frequency with the size of 100 mm diameter, 12.2 mm thickness plate. The energy conversion efficiency of about 13.6 % at 2 m distance is obtained, experimentally. This result is quite high considered with the device size and the power transfering distance.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.771-776
• /
• 2012

Recently, wireless power transfer technology is ready to be commercialized in consumer electronics. It draws attention of not only experts but also public because of its convenience and huge market. However, previous technologies such as magnetic resonance and induction coupling have limited applications because of its short transfer distance compared to device size and magnetic intensity limitation for the safety of body exposure. As an alternative, ultrasonic wireless power transfer technology is proposed. The ultrasonic wireless power transfer system is composed of transmitter which converts electrical energy to ultrasonic energy and receiver which converts the ultrasonic energy to the electrical energy again. This paper is focused on the development of high energy conversion efficiency of ultrasonic transmitter. Optimal transfer frequency is calculated based on the acoustic radiation and damping effect. The transmitter is designed through numerical analysis, and is manufactured to match the optimal transfer frequency with the size of 100mm diameter, 12.2 mm thickness plate. The energy conversion efficiency of about 13.6% at 2m distance is obtained, experimentally. This result is quite high considered with the device size and the power transfer distance.

• Journal of electromagnetic engineering and science
• /
• 제15권3호
• /
• pp.194-198
• /
• 2015

Magnetic resonant coupling is more efficient than inductive coupling for transferring power wirelessly over a distance. However, a conventional resonant wireless power transfer (WPT) system requires a transmitter and receiver pair in exactly coaxial positions. We propose a resonator that can serve as an omnidirectional WPT system. A magnetic field will be generated by the current flowed through the transmitter. This magnetic field radiates omnidirectionally in the x-y plane because of the crisscross structure characteristic of the transmitter. The proposed resonator is demonstrated by using a single port. To check the received S21 and transfer efficiency, we moved the receiver around the transmitter at different distances (50-350 mm). As a result, the transmission efficiency is found to be 48%-54% at 200 mm.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.2089-2094
• /
• 2010

The importance of broadband wireless communication implemented at subway tunnels is growing up. At 18GHz wireless video transmission system, the transmitter requires a digital modulation method. At subway tunnel, A 18GHz's influence of the multi-pass padding is strong. OFDM digital modulation that is strong for multi-pass padding is recommended. In this paper, Suitable to a subway wireless video transmission OFDM receiver is designed. OFDM receiver system has 6dB gaion because uses diversity of space diversity and MRC(Maximum Ratio Combining) diversity. The transmitter system use C&ITechnologies's transmitter board. IF frequency of receiver is 480MHz. OFDM modulation parameter is as follow, The bandwidth is 8MHz, The numuber of carrier if 2,000, The modulation methode is QAM16, The guard interval is 1/32.