• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.1
• /
• pp.37-43
• /
• 2012

In this paper, we analysis wideband spectrum sensing with distance based weight combining for Cognitive Radio (CR) systems. CR systems is implemented the spectrum of the Primary User(PU) by using a energy detection method. Threshold is determined in accordance with the constant false alarm rate (CFAR) algorithm for energy detection. The signal of PU is BPSK signal and the wireless channel between a PU and CR systems is modeled as Gaussian channel. From the simulation results, the wideband sensing with distance based and Distance based weight Combing (DWC) methods shows higher spectrum sensing performance than single CR user spectrum sensing.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1449-1454
• /
• 2012

Received signal strength indicator (RSSI) represents the strength of the received signal at the front end of analog-to-digital convertor (ADC) input. RSSI value can be used for deciding the status of channel at the receiver. In this paper, the usage of RSSI in handover is studied using the practical measurement data. We first measure RSSI in 5.9GHz frequency band which is commonly used in wireless access in vehicular environments (WAVE) system. i.e., vehicular communications. Then, to implement a fast handover, the usability of RSSI data is analyzed based on the measured data. We also apply handover in practical highway environments.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.277-286
• /
• 2010

In this paper amplitude and phase distortion of the received signal through a fading channel results in a severe performance degradation of the communication system, Therefore we consider the variance of the maximum a posteriori phase estimate of sinusoidal signal by the Cramer-Rao bound in wireless fading channel. To find the Cramer-Rao lower bound for the variance of the phase, We use the derived probability density function(pdf) of the phase in Nakagami fading channel. We analyze the error performance of modulation signals using order statistics on generalized combining reception and find adequate diversity branch number.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.297-304
• /
• 2015

This study concerns the integrated gas sensor system of wire and wireless communication by using IoT(Internet of Things) technology. First, communication part is that it delivers the detection information, which transferred by wire or wireless communication and required control procedure based on a wireless module that receives the gas leakage information from wired or wireless detector, to administrator or user's terminal. Second, receiver part is that it shows the location and information, which received from the wired detector formed by a detecting sensor's node as linking with the communication part, and transfers these to the communication part. Third, wireless detector formed as a communication module of a detecting sensor node is that it detects gas leakage and transfers the information through wireless as a packet.Fourth, wired detector communicated with the receiver part and formed as a communication module of a detecting sensor node is that it detects gas leakage, transfers and shows the information as a packet. Fifth, administrator's terminal is that it receives gas leakage information by the communication part, transfers the signal by remote-control, and shut off a gas valve as responding the information. Sixth, database is that it is connected with the communication part; it sets and stores the default values for detecting smoke, CO., and temperature; it transfers this information to the communication part or sends a gas detecting signal to user's terminal. Seventh, user's terminal is that it receives each location's default value which stored and set at the database; it manages emergency situation as shutting off a gas valve through remote control by corresponding each location's gas leakage information, which transferred from the detector to the communication part by wireless.It is possible to process a high quality data regarding flammable or toxic gas by transferring the data, which measured by a sensor module of detector, to the communication part through wire and wireless. And, it allows a user to find the location by a smart phone where gas leaks. Eventually, it minimizes human life or property loss by having stability on gas leakage as well as corresponding each location's information quickly.

• Proceedings of the IEEK Conference
• /
• 2004.06a
• /
• pp.95-98
• /
• 2004

In this paper, the hardware design of a transmission convergence sublayer(TC) for boradband wireless access system is described, which performs (1) formatting TC PDUs to MAC PDUs, (2) RS encoding/decoding, (3) providing various control signal to PHY modem. The TC hardware has been designed in VHDL, and successfully synthesized in an FPGA chip.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.8B
• /
• pp.674-682
• /
• 2003

This paper presents the studies on wireless channel modeling and reverse link synchronization of CATV. This paper analyzes multi-path fading channel to the cause of signal distortion in the wireless communication environment. We represent the microwave link characteristics according to the channel model. Multi-path channel can affect fading.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.307-308
• /
• 2008

In this paper, we propose a mitigation method to reduce the effect of pilot interference at the wireless repeater. This improves the signal to interference ratio (SIR), and enables increased cell capacity and better bits error rates (BER) performance in the WCDMA systems. Simulation studies have been carried out to verify the proposed approach and we obtained promising results.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.199-202
• /
• 1999

In this paper, a possibility of building various types of RF passive components using the silicon micromachining technique has been examined with special emphasis on the wireless and mobile communication applications. Silicon micromachining technique is compatible with conventional silicon IC process and could provide a possibility of integrating base-band signal processing units and RF passive and active circuit components all in one silicon wafer rendering implementation of system-on-chip paradigm for future mobile and wireless communication systems.

• Proceedings of the IEEK Conference
• /
• 2002.06e
• /
• pp.55-58
• /
• 2002

This paper describes an RF module for 2.4GHz wireless audio/video transmission. The pre-processed baseband input signals are FM-modulated using a VCO and then transmitted through an antenna after RF filtering. The designed circuits are implemented using a Teflon board of which the size is 52mm${\times}$62mm. The measured maximum output signal levels are around -3dBm and the harmonics are less than -450dBc. The manufactured module consumes 130mA from a 8V supply.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.4
• /
• pp.85-90
• /
• 2014

We realized a wireless multiple integrated laser engagement system composed of personal area network using Zigbee. The wireless laser detector had function of analog signal processor, decoder and wireless communication. However, it should consume low power and be small and light in order to be attached to a soldier's body. The decoder was realized in software to be small and light. We induced low power consumption as reducing the load of system using a narrow band optical filter. The fabricated wireless laser detector functioned well in optically noisy environment. Although the communication to the player unit through the wireless personal area network was dependent on the attachment place it was perfectly worked with transmission power of -40.2dBm or more.