• Journal of Information Processing Systems
• /
• v.2 no.3 s.4
• /
• pp.159-162
• /
• 2006

Wireless LANs are becoming more widespread because of the rapid advance of wireless technologies and mobile computers. In this paper, we present the design and implementation of a system to help mobile users to select the most competent AP. By monitoring the network traffic of APs within the local LAN in real time, this system offers the mobile user the network utilizations, locations, and signal strengths of APs online. Based on the information, the user can select a competent AP with a high wireless bandwidth. Finally, we verified the accuracy of monitoring and calculating with regard to the utilizations of APs through real experiments.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.2
• /
• pp.1-9
• /
• 2012

Wireless sensor nodes are widely used for various applications such as environmental monitoring. In this paper, the RSSI and PER are measured for the indoor environment with the various interferences such as obstacles(concrete walls, steel doors) and the 2.4GHz wireless LAN interference. Also, the RSSI and PER are measured for the outdoor environments. From the measured values of the RSSI and PER, the guideline for the stable operation of the wireless sensor network is suggested.

• Smart Structures and Systems
• /
• v.10 no.3
• /
• pp.299-312
• /
• 2012

The authors' research efforts recently led to the development of a customized wireless control unit which receives the real-time feedbacks from the sensors, and elaborates the consequent control signal to drive the actuator(s). The controller is wireless in performing the data transmission task, i.e., it receives the signals from the sensors without the need of installing any analogue cable connection between them, but it is powered by wire. The actuator also needs to be powered by wire. In this framework, the design of a power management unit is of interest only for the wireless sensor stations, and it should be adaptable to different kind of sensor requirements in terms of voltage and power consumption. In the present paper, the power management efficiency is optimized by taking into consideration three different kinds of accelerometers, a load cell, and a non-contact laser displacement sensor. The required voltages are assumed to be provided by a power harvesting solution where the energy is stored into a capacitor.

• Journal of electromagnetic engineering and science
• /
• v.11 no.4
• /
• pp.269-273
• /
• 2011

A medical environment in which patient information can be accessed anytime / anywhere is called a "ubiquitous environment". To realize such an environment, the installation of wireless LAN is quite effective. Because the maximum radio wave output (antenna power) is set low in Japan, it has been easy to safely introduce wireless LAN into hospitals, to date mainly into large hospitals. However, if the placement of access points is not done properly, problems will occur, such as signals not reaching the desired area. A solution to these types of problems is to do an electromagnetic-field propagation simulation, which should be performed before construction of the hospital. It is also necessary to protect against security problems, such as signal interception or illegal access. We herein show our procedures for the safe introduction of wireless LAN.

• ETRI Journal
• /
• v.34 no.3
• /
• pp.319-329
• /
• 2012

Closed-loop transmit diversity is considered an important technique for improving the link budget in the third generation and future wireless communication standards. This paper proposes several transmit diversity algorithms suitable for small wireless terminals and presents performance assessment in terms of average signal-to-noise ratio (SNR) and outage improvement, convergence, and complexity of operations. The algorithms presented herein are verified using data from measured indoor channels with variable antenna spacing and the results explained using measured radiation patterns for a two-element array. It is shown that for a two-element array, the best among the proposed techniques provides SNR improvement of about 3 dB in a tightly spaced array (inter-element spacing of 0.1 wavelength at 2 GHz) typical of small wireless devices. Additionally, these techniques are shown to perform significantly better than a single antenna device in an indoor channel considering realistic values of latency and propagation errors.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.16-19
• /
• 2014

In this paper, the beacon signals of WiFi doppler frequency detection based WiFi-AP was designed with the subcarrier between a transmitter and a receiver of WLAN(wireless LAN). We can use such signals to identify human moving as an antenna array and tracking of RF beam. This wireless security services with the combination of WiFi doppler frequency and adaptive beacon time signal was proposed for wireless detection and motion based services.

• ETRI Journal
• /
• v.41 no.2
• /
• pp.224-234
• /
• 2019

This paper proposes a new spectrum forecasting (SF) model to estimate the spectrum demands for future mobile broadband (MBB) services. The model requires five main input metrics, that is, the current available spectrum, site number growth, mobile data traffic growth, average network utilization, and spectrum efficiency growth. Using the proposed SF model, the future MBB spectrum demand for Malaysia in 2020 is forecasted based on the input market data of four major mobile telecommunication operators represented by A-D, which account for approximately 95% of the local mobile market share. Statistical data to generate the five input metrics were obtained from prominent agencies, such as the Malaysian Communications and Multimedia Commission, OpenSignal, Analysys Mason, GSMA, and Huawei. Our forecasting results indicate that by 2020, Malaysia would require approximately 307 MHz of additional spectrum to fulfill the enormous increase in mobile broadband data demands.

• International journal of advanced smart convergence
• /
• v.12 no.2
• /
• pp.173-181
• /
• 2023

Data collection is an essential element in the construction and operation of a smart factory. The quality of data collection is greatly influenced by network conditions, and existing wireless network systems for IoT inevitably lose data due to wireless signal strength. This data loss has contributed to increased system instability due to misinformation based on incorrect data. In this study, I designed a distributed MQTT IoT smart sensor and gateway structure that supports wireless multicasting for smooth sensor data collection. Through this, it was possible to derive significant results in the service latency and data loss rate of packets even in a wireless environment, unlike the MQTT QoS-based system. Therefore, through this study, it will be possible to implement a data collection management system optimized for the domestic smart factory manufacturing environment that can prevent data loss and delay due to abnormal data generation and minimize the input of management personnel.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.213-214
• /
• 2008

In this paper, we analyze the performance of a cooperative communication wireless network over independent and identically distributed (IID) Nakagami-m fading channels. A simple transmission scheme is considered where the relay is operating in amplify-forward (AF) mode. A closed-form expression for symbol error rate (SER) is obtained using the moment generating function (MGF) of the total signal to noise ratio (SNR) of the transmitted signal with binary phase shift keying (BPSK).

• Proceedings of the IEEK Conference
• /
• 1999.11a
• /
• pp.763-766
• /
• 1999

Direct-Sequence code-division multiple access(DS/CDMA) is considered by many to be a promising technology for future wireless communication networks. In this paper, we report new analysis for probability of BPSK CDMA hypothesis test in jointly distributed AWGN Rayleigh-fading received signal. In previous method, analysis is performed on AWGN or Rayleigh-faded signal in separately. In this paper, we propose model for hypothesis test system of the AWGN Rayleigh-faded received signal.