• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.149-156
• /
• 2012

This paper suggests the data transmission technology for applying to the actual railway line based on the technological trends and theories for the wireless Mesh techniques. This paper presents a technical basis that is applicable to the economic and efficient use of frequency and to the development of a Communication Based Train Control System by demonstrating its Applicability, Availability, Reliability and Safety for the train control system of the radio frequency of the bandwidth of 5.7 GHz at the experiments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.6
• /
• pp.103-110
• /
• 2009

We propose a novel routing protocol selection scheme based on the application feature in wireless mesh network. Each application has its own feature such as its packet size. For example, text messenger generates short size packets and file transfer application generates long size packets. Routing protocols in wireless mesh network discover the route with different features. Some find shortest hop routes; others find the routes consisting of high bandwidth though they have more hops. The proposed scheme selects the routing protocol by matching the feature of routing protocol and that of application. This paper shows the system that we have developed for supporting mesh routing as well as the proposed scheme and experimental results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9B
• /
• pp.795-801
• /
• 2008

Wireless Mesh Networks (WMNs) are popular due to their low cost and rapid deployment. Currently, many WMN researchers often considers the use of ad-hoc routing protocols because WMNs are similar to the ad-hoc networks. Some of currently deployed WMNs consider to use on-demand routing protocols such as Ad-hoc On-demand Distance Vector (AODV) and Dynamic Source Routing (DSR). But, AODV are not appropriate for Wireless Mesh Networks (WMNs), because flooding-based route discovery is both redundant and expensive in terms of control message overhead. In this paper, we propose a directional AODV (D-AODV) routing protocol based on hop count to a gateway. We implement the D-AODV routing protocol and evaluate the performance of the D-AODV on the testbed. The measurement results show that the D-AODV can enhance the network throughput by reducing the routing overhead.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.3B
• /
• pp.204-211
• /
• 2012

Wireless Mesh Network (WMN) has drawn much attention due to wide service coverage with low system cost. However, WMN suffers from high bit error rate, which provides different link capacity among wireless mesh routers. The conventional routing metrics select the path based on link quality. The link with the best quality is preferred as the data transmission path, and they becomes the bottleneck links, which leads to network performance degradation. In this paper, we propose a routing metric that considers the available bandwidth and the number of nodes suffering congestion in the path. Through computer simulations, we verified that the proposed routing metric outperforms the existing routing metrics in terms of average transmission delay, packet loss, system throughput.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1256-1275
• /
• 2014

As one of the new self-organizing and self-configuration broadband networks, wireless mesh networks are being increasingly attractive. In order to solve the load balancing problem in wireless mesh networks, this paper proposes a novel multi-path routing algorithm based on clustering (Cluster_MMesh) for wireless mesh networks. In the clustering stage, on the basis of the maximum connectivity clustering algorithm and k-hop clustering algorithm, according to the idea of maximum connectivity, a new concept of node connectivity degree is proposed in this paper, which can make the selection of cluster head more simple and reasonable. While clustering, the node which has less expected load in the candidate border gateway node set will be selected as the border gateway node. In the multi-path routing establishment stage, we use the intra-clustering multi-path routing algorithm and inter-clustering multi-path routing algorithm to establish multi-path routing from the source node to the destination node. At last, in the traffic allocation stage, we will use the virtual disjoint multi-path model (Vdmp) to allocate the network traffic. Simulation results show that the Cluster_MMesh routing algorithm can help increase the packet delivery rate, reduce the average end to end delay, and improve the network performance.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.2
• /
• pp.254-259
• /
• 2008

Mesh WLANs, which consist of wireless mesh routers connecting each other in a mesh topology and self-operate after their autoconfiguration, have several advantages in convenience, swiftness and flexibility of deployment and operation over existing WLANs the expansions of which are done by connecting the APs with wires. However, many technical issues still remain to be solved. Among them, network performance degradations due to the interference between the adjacent hops in multi-hop mesh WLANs, and the reusability of the existing wireless network protocols are critical problems to be answered. This work evaluates the VoIP support performance of IEEE 802.11a/g-based mesh WLANs with multiple wireless interfaces with simulations. The results show that there exit an unfairness in VoIP packet delay performances among mobile routers located at different hops, and that although the capacity of the admitted calls can be increased by increasing the size of voice packet payload it is far less than the expected one. This suggests that the existing 802.11 MAC protocols have their limitation when applied in mesh networks and their enhancement or even a newer one nay be required.

• Journal of Advanced Navigation Technology
• /
• v.12 no.4
• /
• pp.350-356
• /
• 2008

The recent networks are trending toward wireless networks. So wireless internet used to service of wired networks. But wireless networks can't show same performance of wired networks. Therefore, we are must concerned about Routing Protocol for improvement of a weak point of physical feature. But many researchers are not focusing on developing Routing Protocol. In this paper, we improve on AODV(Ad-hoc On-demand Distance Vector) for Wireless Mesh Networks. And it analyzed the result of simulation.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.68 no.1
• /
• pp.207-214
• /
• 2019

A large-capacity wireless power system is a technology that transmits electric power of kW or more in a noncontact type. Electric cars, electric buses, and electric railways. In order to increase the power transmission efficiency, a resonance method using a frequency of kHz is applied and the efficiency is 80 ~ 90%. In this case, the loss is 10 ~ 20% other than efficiency, and corresponds to several hundreds of W to several kW in kW class wireless power transmission. 35 kW wireless feed system environment, and induced current in the nearby conductive part was measured. As a result of analysis, it was confirmed that induction phenomenon is higher as the loop configuration of the conductive part per area is dense. The increase of the induced current in the mesh loop is characterized by the density of the nearby conductive part having a permeability per unit area. The concentration of the magnetic field by the permeability is increased and the induction phenomenon causing the induction current is increased. It was confirmed that induction phenomenon increases by about 2.7 times when 9 times dense structure is formed.

• Journal of Digital Contents Society
• /
• v.8 no.3
• /
• pp.323-328
• /
• 2007

Communication systems beyond 3G should provide more than 100 Mbps for wireless access. In addition to smart antennas, wireless multi-hop networks are proposed to increase the cell size and throughput. For example, Zigbee technology is expected to provide low cost and low power connectivity and can be implemented in wireless mesh networks larger than is possible with Bluetooth. Also, home embedded system using wireless mesh network is one of the key market areas for Zigbee applications. If the line-of-sight path is shadowed by home obstacles, a direct connection between the access point (AP) and the node is not possible at high frequencies. Therefore, by using multi-hop relay scheme the end node can be reached to AP. In this paper, the relaying of data between the AP and the end node is investigated and the throughput and PER(Packet Error Rate) are evaluated in multi-hop wireless mesh networks by using DSSS/BPSK system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.2A
• /
• pp.165-173
• /
• 2010

WMN(Wireless Mesh Network) is an wireless backbone network technology that is an easily configurable network in the low cost compared to the wireless LAN(Local Area Network). Most of the previous researches have evaluated their algorithms by the simulations rather than by the implementation. There exist some implementation papers, however, they have the limitations of the flexibility on the link establishment and the link quality utilization. Consequently, the benefit of the WMN - configuration flexibility is degraded and the performance deterioration occurs in the multi-hop wireless environment. In this paper, we introduce a Linux-based link layer Wireless Mesh Routing System - WBMR. The design and implementation of WBMR provides the dynamic link establishment and the effective multi-channel usage. We have modified the ntroof the original WLAN operation for the dynamic link establishment, and the Linux bridge for the link layer routing. The result of performance evaluation verifies that our WBMR supports fast self-configuration and increases data transmission throughput compared to the other researches of the wireless multi-hop environment.