• Journal of Biomedical Engineering Research
• /
• v.20 no.1
• /
• pp.75-80
• /
• 1999

Since a Holter monitor records a patients' ECG when he is in motion, it can monitor complex heart disease effectively. But it can not handle a sudden heart disease because the diagnosis process will be done only after 24 hours. So in this study, a model of ambulatory monitoring system using wireless data communication network is proposed. And a mobile ECG equipment and a doctors' terminal are developed for the proposed system implementation. As a result, we can evaluate that the proposed ambulatory monitoring system is suitable for the management of ambulatory patients who may be at risk form sudden cardiac abnormalities.

• Journal of Advanced Navigation Technology
• /
• v.12 no.2
• /
• pp.91-99
• /
• 2008

In this paper, we implemented an wireless remote control and monitoring system by using Globalstar satellite modem. This system is composed of the data terminal equipment of Globalstar data communication system using microcontroller, C8051F023, and WGIS(Web-based GIS) user program. We tested the wireless remote control and monitoring system with data terminal equipment and user program how to work properly, and verified that the user could confirm the data from the data terminal equipment, which can provide the status of input/output devices and the information of location with the main and control dialog by GIS(Geographic Information System) program. For data communication of between data terminal equipment and user program, we programed PPP and TCP/IP protocol to communicate with each other. Some GIS tools used in this program are ArcView and MapObject from ESRI to offer various visual mapping information to the user.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3064-3066
• /
• 1999

The existing equipment with wire communication can expect the stability of data transmission. However, according to increasing a number of DTE (Data Terminal Equipment), wiring work becomes a heavy burden. Restriction to application about portable DTE and the lack of flexibility are another drawback of wire communication. This paper presents the design and implementation of a RF (Radio Frequency) based wireless communication system. The RF based module is designed to the multi communication between DTEs. The RF based module consists of RF circuit and microprocessor. The main properties of RF circuit are maximum 5Kbps transmission rate, maximum 90m transmission distance and 433MHz frequency band. The microprocessor rearrange the data into AHDLC(Advanced High level Data Link Control) format and then instructs RF circuits to transmit/receive the data. The RF module have a wide application field such as fire/security alarm, remote control/measurement etc..

• Journal of Drive and Control
• /
• v.10 no.2
• /
• pp.7-12
• /
• 2013

In this study, a wire/wireless communication system transmitting the operation data of engine from the ER (Engine Room) to the engine controller of ECR(Engine Control Room) has been developed through the communication of ISM(Industrial Science Medical) Band for the test operation environment improvement of medium speed engine. This wire/wireless communication system is composed of the RTU (Remote Terminal Unit) gathering and transmitting engine data as well as the MCU (Master Control Unit) receiving engine status information from the RTU to be sent to the engine controller (PLC). Through this study, a trial product of RTU and MCU has been manufactured. A test bench that has made temperature, pressure and pick-up sensor into a module for the local test of prototype was produced a test bench. In addition, at the same time save the data to a Web server and the smart phone real-time monitoring system has been developed using Wi-Fi communications. The ultimate objective of this study is to develop a wireless smart phone monitoring system of engine for the operator of engine to be able to monitor and control engine status even from the outside of engine room and control room based on this study.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.4
• /
• pp.385-390
• /
• 2015

Quay cranes are considered core equipment for container terminal operation. However, unmanned operation systems have not as yet been announced due to the technological difficulties of implementation. In this paper, we developed a wireless controller to control a quay crane simulator remotely and conducted its performance test, a first step toward unmanned operation of quay cranes. The communication delay of a developed wireless controller was about 9.4ms on average while that of existing wired controllers was about 5.6ms. The same functions were implemented and tested on a smart phone where the average communication delay was 7.3ms. In addition, to apply the developed system into a real environment, we proposed a network architecture based on IEEE 802.11ac and carried out its performance evaluation. When the distance between two nodes was 50m apart, the throughputs of the TCP (Transmission Control Protocol) and UDP (User Datagram Protocol) were 57Mbps and 189Mbps, respectively. The communication delay of the control data was 9.1ms through the TCP channel. These results reveal the proper working of remote quay crane operation if we adopt the IEEE 802.11ac network.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.6
• /
• pp.1-10
• /
• 2008

Health medical service is passes with u-Healthcare and it promote health medical service environment change to the citizen center in the hospital center, and all methods of diagnosis, treatment, after management are forecasted in prevention because a balance develops. It is necessary for an u-Healthcare terminal is devoted to becoming an ubiquitous terminal of consciousness when in where and the following technology to result in implementation. Information communication equipment and an appliance technical data transfer technology Precision and how mobile gateway implementation, Bluetooth wireless appliance function is various with mobile communication and radio communication network and an appliance function are necessary. therefore, in this paper, we did a study on the implementation of bio signal measuring system for the u-healthcare based on mobile.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.247-250
• /
• 2003

Mobile wire technology is a publicly available general purpose for Radio Frequency(RF) communication for short-range and point-to-multi point voice and data transfer. In this paper, we proposed a new technology of the synchronized frame structure which is based on the CDMA technique, and it's implemented into the VLSI design by FPGA. The developmental technique consists of an assigned coded type mobile communication equipments and available local mobile or wireless communication scheme quasi BT(Blue Tooth)'s functions as multiplexer or do-multiplexer for each other applications. We implement this architecture with special proposed frame structure in the local area network. Also, we expect the above proposed structure extend into the DS3 network architecture and applicable to the TE(Terminal Equipment) in the local communication area and the other one etc.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.2 no.2
• /
• pp.117-130
• /
• 1999

In this paper, the performance of data communication function of military radio equipment P-999K is analyzed based on the standard CSMA/CA protocol which is DFWMAC standard protocol done by IEEE802.11 work group. Basic three standard protocols, i.e. Basic CSMA/CA, Stop & Wait ARQ and 4-Way Handshake CSMA/CA protocols are analyzed and compared with each other under the hidden terminal environment. The computer simulation is also done by using SIMSCRIPT II.5 which is popular software tool for an independent processing. The results show that p-persistent(with p=0.3) CSMA scheme is superior to non-persistent CSMA scheme with non-hidden terminal condition, but the performances of both schemes are almost same with hidden terminal situation. And the results of computer simulations are also showed that Basic CSMA/CA protocol is superior to the other protocols when the ratio of hidden terminals is below 10 % of total user population, however, with the above 20% hidden terminals environment and the higher offered traffic conditions the 4-Way Handshake CSMA/CA protocol shows the most superior performance.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.4
• /
• pp.209-214
• /
• 2011

This study suggests a Healthcare System for elderly and disabled who have mobility impairment and use a wheelchair for long time. Seating long time in a wheelchair without reducing pressure causes high risk of developing pressure sores. Pressure sores come with great deal of pain and often lead to develop complication. Not only it takes time and effort to treat pressure sores but also increases medical expenses. Therefore, we will develop a device to help to prevent pressure sores by measuring pressure distribution while seating in a wheelchair and wirelessly send information to user device to check pressure distribution in real time. The equipment to measure body pressure is composed of FSR sitting mat which is a sensor measuring part and an user terminal which is a monitoring part. The designed mat is matrix formed FSR sensor to measure pressure. The sensor send measured data to the controller which is connected to the end of the mat, and then the collected data are sent to an user terminal through a bluetooth. Developing a pressure monitoring system will help to prevent those who have mobility impairment to manage pressure sores and furthermore relieve their burden of medical expenses.

• The Journal of the Korea Contents Association
• /
• v.13 no.8
• /
• pp.458-465
• /
• 2013

The purpose of this research is possible to reduce cost of management and maintenance to realization of smartphone and using data server network technology instead of GPS. Former wireless bus information system was focused on supply side management structure and national spread thus it needs to establish GPS terminal, Windows CE, Window XP embedded and LCD panels which provide only one way communication of information of public traffic information. Therefore, former system management and maintenance cost are very expansive. This research is not use GPS terminal and other hardware equipment but design and realization using smartphone and data network server. This system also provides low cost of management and maintenance. It is not only service downtown area but also out of town and small and medium-sized cities. This system functionally gets a satisfying result user convenience and satisfaction using function of set-up route map, real-time display, and running statically analysis.