• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.184-187
• /
• 2000

A network is an important portion of communications in these days. Because of many inconveniences of a wired-network, wireless solutions have been studied for many years. One of the results of those efforts is IEEE 802.11, wireless LAN. This paper briefly summarizes wireless LAN and specially focuses on the design of a network processor for the wireless LAN system. The processor has 16-bit instruction set suitably selected for network processing and low-power consumption. It is implemented and verified with a wireless LAN system model. The wireless LAN system is modeled in RTL excluding the RF module. The processor can be used in many wireless systems as a controller and utilized as a test module for the research of low-power schemes.

• International Journal of Advanced Culture Technology
• /
• v.9 no.4
• /
• pp.409-416
• /
• 2021

We are invented the movement composition technique that is to check the food adjacent-package status of the wireless-management movement monitoring level (WMMML) on the movement monitoring communication system. The movement monitoring level condition by the movement monitoring communication system is formatted with the adjacent-package system. As to inspection a wireless RFID of the wireless RFID, we are found of the movement value with wireless RFID by the adjacent upper take form. The concept of movement monitoring level is formatted the reference of wireless-management level for composition signal by the movement package communication system. Further symbolizing a food composition of the WMMML of the medium-minimum in terms of the adjacent-package communication system, and the movement wireless RFID package that was the movement value of the far composition of the Mo-MMCS-FA-_φMED-MIN with 5.80±1.20 units, that was the movement value of the convenient composition of the Mo-MMCS-CO-_φMED-MIN with 4.06±(-0.04) units, that was the movement value of the flank composition of the Mo-MMCS-MO-_φMED-MIN with 0.91±0.07 units, that was the movement value of the vicinage composition of the Mo-MMCS-VI-_φMED-MIN with 0.18±(-0.03) units. The adjacent package will be to look into at the food ability of the adjacent-package communication system with wireless RFID by the movement monitoring level on the WMMML that is supply the wireless communication by the movement monitoring level system. We will be possible to make effort of a communication system by the management signal and to put to use of the delivery data of RFID level by the delivery system.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.22 no.1
• /
• pp.7-14
• /
• 2014

This paper deals with recent research cases and directions of Fly-By-Wireless (FBWLS) flight control technology. FBWLS is a new type of flight control system technology with the aim of solving the problems mainly caused by the increasing amount of wires in aircraft to which Fly-By-Wire (FBW) technology applies. Therefore, in FBWLS flight control system the wired communication system is replaced with a wireless communication system. Currently the FBWLS flight control technology is at an initial development stage and thus this paper surveys deals with the cases in the viewpoint of technology feasibility. In this context, this paper analyzes technology that needs further studies to secure the reliability, stability and accuracy to the similar level of the corresponding FBW system. Since the major problems of FBWLS technology are packet losses and time delays so that this paper suggests the research direction of wireless communication protocol selection, optimization of wireless communication network and controller design considered communication environment.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.6 s.44
• /
• pp.211-219
• /
• 2006

As the wireless network is popular and expanded, it is necessary to development the IDS(Intrusion Detection System)/Filtering System from the malicious wireless traffic. We propose the W-Sensor SW which detects the malicious wireless traffic and the W-TMS system which filters the malicious traffic by W-Sensor log in this paper. It is efficient to detect the malicious traffic and adaptive to change the security rules rapidly by the proposed W-Sensor SW. The designed W-Sensor by installing on a notebook supports the mobility of IDS in compare with the existed AP based Sensor.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.1255-1261
• /
• 2010

An operating information and fault recode of train is very important information for safety driving and maintenance. And these information is increased and need high speed as the number of trains is increased. Wireless LAN or CDMA network is efficient to report more complicated and various information from vehicle to server in control center. Existing wireless transmission system has weakness due to transmission system is separated with TDCS and standalone. At first, standalone system needs space to be installed and cost is increased. And data transmission capacity and speed is limited by complicated structure that transmission system receive data thru serial communication like RS232 and then data transmission system send data to server in control center. This article is study to develop embedded & wireless fault code transmission device to be installed in TDCS to overcome weakness of space and to have more cost effective and simple structure. It is adapted 802.11b/g WiFi for wireless communication and OS is used embedded Linux that can easily implement wireless communication environment and ensure TCP/IP communication’s security. We also implement simple server to test wireless communication between embedded & wireless fault code transmission device and server in control center.

• Structural Monitoring and Maintenance
• /
• v.1 no.1
• /
• pp.47-67
• /
• 2014

This study has been motivated to examine the performance of a wireless sensor system under the typhoons as well as to analyze the effect of the typhoons on the bridge's vibration responses and the variation of cable forces. During the long-term field experiment on a real cable-stayed bridge in years 2011-2012, the bridge had experienced two consecutive typhoons, Bolaven and Tembin, and the wireless sensor system had recorded data of wind speeds and vibration responses from a few survived sensor nodes. In this paper, the wireless structural health monitoring of stay cables under the two consecutive typhoons is presented. Firstly, the wireless monitoring system for cable-stayed bridge is described. Multi-scale vibration sensor nodes are utilized to measure both acceleration and PZT dynamic strain from stay cables. Also, cable forces are estimated by a tension force monitoring software based on vibration properties. Secondly, the cable-stayed bridge with the wireless monitoring system is described and its wireless monitoring capacities for deck and cables are evaluated. Finally, the structural health monitoring of stay cables under the attack of the two typhoons is described. Wind-induced deck vibration, cable vibration and cable force variation are examined based on the field measurements in the cable-stayed bridge under the two consecutive typhoons.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.21 no.3
• /
• pp.275-281
• /
• 2016

A novel bidirectional magnetic wireless communication system is proposed in this study. This system provides the communication capability between the source and load sides by high-frequency signal while wireless power is transferred. Contrary to the conventional wireless communication systems using complex IC circuit and active components, the proposed system is simply composed of passive components. It is practical and beneficial for environmental robustness, cost effectiveness, and simple implementation. The detailed static analysis of the proposed system for power and communication lines is established. The proposed system is experimentally verified, and results show that a 0.1 voltage gain for communication line is obtained while a 2.0 voltage gain for the power line is achieved. The proposed system is adequate for practical applications as it allows the inductive power transfer system to wirelessly and easily communicate between the source and load sides.

• Smart Structures and Systems
• /
• v.3 no.3
• /
• pp.321-340
• /
• 2007

Structural control technologies have attracted great interest from the earthquake engineering community over the last few decades as an effective method of reducing undesired structural responses. Traditional structural control systems employ large quantities of cables to connect structural sensors, actuators, and controllers into one integrated system. To reduce the high-costs associated with labor-intensive installations, wireless communication can serve as an alternative real-time communication link between the nodes of a control system. A prototype wireless structural sensing and control system has been physically implemented and its performance verified in large-scale shake table tests. This paper introduces the design of this prototype system and investigates the feasibility of employing decentralized and partially decentralized control strategies to mitigate the challenge of communication latencies associated with wireless sensor networks. Closed-loop feedback control algorithms are embedded within the wireless sensor prototypes allowing them to serve as controllers in the control system. To validate the embedment of control algorithms, a 3-story half-scale steel structure is employed with magnetorheological (MR) dampers installed on each floor. Both numerical simulation and experimental results show that decentralized control solutions can be very effective in attaining the optimal performance of the wireless control system.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.258-262
• /
• 2009

A Practical application of environmental monitoring system based on wireless sensor node network with the core of embedded system STR711FR2 microprocessor is presented in the paper. The adaptable and classifiable wireless sensor node network is used to achieve the data acquisition and multi-hop wireless communication of parameters of the monitoring base station environment including repeaters. The structure of the system is proposed and the hardware architecture of the system is designed, and the system operating procedures is proposed. As a result of field test, designed hardware platform operated with 50kbps bit rate and 5MHz channel spacing at 2040Hz. The wireless monitoring system can be managed and swiftly retreated without support of base station environmental monitoring.

• International journal of advanced smart convergence
• /
• v.7 no.4
• /
• pp.10-18
• /
• 2018

For the information services supporting requests of data items from a great number of mobile clients, wireless data broadcasting is an effective way because it can accommodate any number of clients. In the wireless data broadcasting, various air indexing schemes and data scheduling schemes have been developed in order to enable the clients to access their desired data items efficiently. The broadcasting system needs a method to simulate newly designed air indexing and scheduling schemes of the system, and to evaluate the performance parameters of the schemes. In this paper, we design an expandable and efficient simulation framework for the wireless data broadcasting based on the partition of data ID space. The framework can adopt regular and irregular space partition and evaluate various performance parameters of the broadcasting system. We implement a testbed of the broadcasting system using the framework, that adopts IIP, GDI and EXP as its air indexing schemes. We simulate the system using the testbed and evaluate the performance parameters of the system. Thus, we show the efficiency and expandability of the designed and implemented framework.