• Journal of Information Processing Systems
• /
• v.13 no.6
• /
• pp.1544-1553
• /
• 2017

The network coding mechanism has attracted much attention because of its advantage of enhanced network throughput which is a desirable characteristic especially in a multi-hop wireless network with limited link capacity such as the device-to-device (D2D) communication network of 5G. COPE proposes to use the XOR-based network coding in the two-hop wireless network topology. For multi-hop wireless networks, the Distributed Coding-Aware Routing (DCAR) mechanism was proposed, in which the coding conditions for two flows intersecting at an intermediate node are defined and the routing metric to improve the coding opportunity by preferring those routes with longer queues is designed. Because the routes with longer queues may increase the delay, DCAR is inefficient in delivering real-time multimedia traffic flows. In this paper, we propose a network coding-aware routing protocol for multi-hop wireless networks that enhances DCAR by considering traffic load distribution and link quality. From this, we can achieve higher network throughput and lower end-to-end delay at the same time for the proper delivery of time-sensitive data flow. The Qualnet-based simulation results show that our proposed scheme outperforms DCAR in terms of throughput and delay.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.4
• /
• pp.800-818
• /
• 2013

Supporting video streaming over multi-hop wireless networks is particularly challenging due to the time-varying and error-prone characteristics of the wireless channel. In this paper, we propose a joint optimization scheme for video streaming over multi-hop wireless networks. Our coding scheme, called Joint Source/Network Coding (JSNC), combines source coding and network coding to maximize the video quality under the limited wireless resources and coding constraints. JSNC segments the streaming data into generations at the source node and exploits the intra-session coding on both the source and the intermediate nodes. The size of the generation and the level of redundancy influence the streaming performance significantly and need to be determined carefully. We formulate the problem as an optimization problem with the objective of minimizing the end-to-end distortion by jointly considering the generation size and the coding redundancy. The simulation results demonstrate that, with the appropriate generation size and coding redundancy, the JSNC scheme can achieve an optimal performance for video streaming over multi-hop wireless networks.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.1
• /
• pp.5-25
• /
• 2009

In recent years the popularity of multi-hop wireless networks has been growing. Its flexible topology and abundant routing path enables many types of applications. However, the lack of a centralized controller often makes it difficult to design a reliable service in multi-hop wireless networks. While packet routing has been the center of attention for decades, recent research focuses on data discovery such as file sharing in multi-hop wireless networks. Although there are many peer-to-peer lookup (P2P-lookup) schemes for wired networks, they have inherent limitations for multi-hop wireless networks. First, a wired P2P-lookup builds a search structure on the overlay network and disregards the underlying topology. Second, the performance guarantee often relies on specific topology models such as random graphs, which do not apply to multi-hop wireless networks. Past studies on wireless P2P-lookup either combined existing solutions with known routing algorithms or proposed tree-based routing, which is prone to traffic congestion. In this paper, we present two wireless P2P-lookup schemes that strictly build a topology-dependent structure. We first propose the Ring Interval Graph Search (RIGS) that constructs a DHT only through direct connections between the nodes. We then propose the ValleyWalk, a loosely-structured scheme that requires simple local hints for query routing. Packet-level simulations showed that RIGS can find the target with near-shortest search length and ValleyWalk can find the target with near-shortest search length when there is at least 5% object replication. We also provide an analytic bound on the search length of ValleyWalk.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.8
• /
• pp.3823-3840
• /
• 2017

This paper analyzes the nodes deployment optimization problem in energy constrained wireless sensor networks, which multi-hop cooperative beamforming (CB) based cooperative-multi-input-single-output (CMISO) transmission is adopted to reduce the energy consumption. Firstly, we establish the energy consumption models for multi-hop SISO, multi-hop DSTBC based CMISO, multi-hop CB based CMISO transmissions under random nodes deployment. Then, we minimize the energy consumption by searching the optimal nodes deployment for the three transmissions. Furthermore, numerical results present the optimal nodes deployment parameters for the three transmissions. Energy consumption of the three transmissions are compared under optimal nodes deployment, which shows that CB based CMISO transmission consumes less energy than SISO and DSTBC based CMISO transmissions. Meanwhile, under optimal nodes deployment, the superiorities of CB based CMISO transmission over SISO and DSTBC based CMISO transmissions can be more obvious when path-loss-factor becomes low.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.41 no.2
• /
• pp.53-65
• /
• 2016

Static wireless multi-hop networks, such as wireless mesh networks and wireless sensor networks have proliferated in recent years because of they are easy to deploy and have low installation cost. Two key measures are used to evaluate the performance of a multicast tree algorithm or protocol : end-to-end delay and the number of transmissions. End-to-end delay is the most important measure in terms of QoS because it affects the total throughput in wireless networks. Delay is similar to the hop count or path length from the source to each destination and is directly related to packet success ratio. In wireless networks, each node uses the air medium to transmit data, and thus, bandwidth consumption is related to the number of transmission nodes. A network has many transmitting nodes, which will cause many collisions and queues because of congestion. In this paper, we optimize two metrics through a guaranteed delay scheme. We provide an integer linear programming formulation to minimize the number of transmissions with a guaranteed hop count and preprocessing to solve the aforementioned problem. We extend this scheme not only with the guaranteed minimum hop count, but also with one or more guaranteed delay bounds to compromise two key metrics. We also provide an explanation of the proposed heuristic algorithm and show its performance and results.

• Journal of Information Processing Systems
• /
• v.2 no.1
• /
• pp.34-38
• /
• 2006

In the wireless network, TCP performs poorly because it was originally designed for wired networks and does not take into consideration wireless characteristics such as mobility, high-loss probability, and hidden-terminal problems. In particular, in the wireless multi-hop networks, a large congestion window increases the probability of contention and packet losses, and TCP performance is degraded severely as a result. So, it is necessary to limit the TCP congestion window size in order keep the probability of contention loss in the system to a minimum. In this paper, we propose a new scheme for determining the maximum congestion window size based on the measured bandwidth and Round-Trip-Time (RTT). Using ns-2 simulation, we show that the proposed scheme reduces the probability of packet contention and improves TCP performance.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.177-179
• /
• 2006

This paper presents an analysis architecture of embedded operating systems for wireless sensor network. Wireless multi-hop sensor networks use battery-operated computing and sensing device. We expect sensor networks to be deployed in an ad hoc fashion, with very high energy constraints. These characteristics of multi-hop wireless sensor networks and applications motivate an operating system that is different from traditional embedded operating system. These days new wireless sensor network embedded operating system come out with some advances compared with previous ones. The analysis is focusing on understanding differences of dominant wireless sensor network OS, such as TinyOS 2.0 with TinyOS 1.x.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.3A
• /
• pp.229-234
• /
• 2009

In this paper, we propose a decision scheme of amount of required resources in wireless multi-hop systems which can reuse radio resources adaptively among relay stations (RSs). Base stations (BSs) can allocate resources dynamically based on amount of required resources of each RS. Moreover using resource reuse with this allocation method can increase amount of available resources in multi-hop systems. Generally, BSs allocate same amount of resources for RSs which share and reuses same resources for each other. Since amount of required resources are different among these RSs, a decision scheme of a specific value which can represent various required resources of RSs is needed. We propose this scheme which can decide the representative value of required resources of RSs adaptively based on the amount of required resources and the buffer state of each RS. Our simulation results show that the proposed scheme can increase performance of a multi-hop system. System capacity with the proposed adaptive scheme is increased by twice as large as one with a fixed representation value.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.3
• /
• pp.477-493
• /
• 2011

The IEEE 802.16 mobile multi-hop relay (MMR) task group 'j' (TGj) has introduced the multi-hop relaying concept in the IEEE 802.16 Wireless MAN, wherein a relay station (RS) is employed to improve network coverage and capacity. Several RSs can be deployed between a base station and mobile stations, and configured to form a tree-like multi-hop topology. In such architecture, we consider the problem of a path selection through which the mobile station in and outside the coverage can communicate with the base station. In this paper, we propose a new path selection algorithm that ensures more efficient distribution of resources such as bandwidth among the relaying nodes for improving the overall performance of the network. Performance of our proposed scheme is compared with the path selection algorithms based on loss rate and the shortest path algorithm. Based on the simulation results using ns-2, we show our proposal significantly improves the performance on throughput, latency and bandwidth consumption.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.3 no.1
• /
• pp.26-51
• /
• 2009

In this paper, we propose an empirical framework for modeling and emulating interference in multi-hop wireless ad-hoc networks. Wireless interference causes wide variation in the frame delivery rate at a link, and thus we cannot represent the state of the link with only two states, connected state and disconnected state, as in wired networks. We first investigate wireless interference in detail, in order to accurately calibrate the interference and identify its underlying attributes, and then we simulate the diverse occurrences and effects of interference, after incorporating the scheme into a simulation tool. Based on these observations, we devise a modeling and simulation framework with several control parameters, and perform an extensive set of simulation studies. The simulation results indicate that the proposed framework enables us to examine various attributes of wireless interferences and their effects on wireless network protocols and systems.