• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.10 no.6
• /
• pp.307-315
• /
• 2010

Although a substantial amount of studies have been carried out in order to improve the performance of IEEE 802.11, most of them focused on how to slowly decrease the Contention Window size, instead of resetting it to its initial value. Slow decreasing of the window size reduces the collision probability and increases the channel throughput. Therefore, it is difficult to achieve good results in a heterogeneous network which coexists with the original DCF. For instance, a Gentle DCF(GDCF) has good performance in a homogeneous environment, while it can hardly transmit frames in a heterogeneous environment including the original DCF. It is because the slow decreasing of the window size reduces the transmission probability. In this paper, we propose a Fast Recovery DCF(FRDCF) to solve this problem. In the FRDCF, the reset mechanism of the original DCF is maintained to keep the transmission probability high, while a new counter is used to enhance the performance of the wireless LAN. We prove that, compared with the GDCF, the FRDCF has better performance in a heterogeneous wireless LAN.

• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.117-122
• /
• 2017

In a wireless communication system, increasing the channel capacity with a limited frequency is a problem in all frequency bands. Increasing the frequency bandwidth and increasing the output can increase the channel capacity, but sometimes the communication is not possible due to interference noise. If the radio frequency allocation is set to world standardization such as WRC or ITU-R, each country has strict control over regulations. This is because one wireless communication system should not affect other systems. We present the results of a study on scenarios and analysis of radio waves to be installed inside and outside the aircraft without interfering with the wireless LAN.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.6
• /
• pp.686-699
• /
• 1999

본 논문은 열린대학(및 열린병원) 구현을 위한 캠퍼스내(종합병원내)에서의 무선 LAN을 이용한 멀티미디어 원격교육(및 원격진료) 시스템 구현에 관한 연구이다. 본 시스템은 정보통신 기술과 멀티미디어 기술이 접목되어 개발된 시스템이다. 또한 본 시스템은 성균관대학교의 원격교육시스템을 확장한 개념이기도 하다. 또한 본 원격교육 시스템은 멀티미디어 미들웨어에 의해 실시간 상호참여형 환경과 IP multicasting을 제공하고 있다.본 시스템은 캠퍼스 내에서 AP(Access Point)을 사용한 무선 LAN과 캠퍼스와 캠퍼스 사이의 T1/E1 네트워크로 구성되어 있다. 이것은 로밍지역을 해결하기 위한 handoff와 중재를 위한 다중 브릿지을 사용함으로써 구현이 가능하다. Abstract In this paper, we propose a multimedia distance education system(or telemedicine) using a wireless LAN for an inner campus university/hospital, which is intended to implement an open university. This system is implemented by a high technology of multimedia and information communication software. Also, this system is an enhanced and expanded system of the conventional distance education of SKKU(Sung Kyun Kwan University). The structure of this system consists of a T1/E1 network(information super high way) between campuses and wireless LAN using the AP(Access Pointer) inner campus. It will be able to use a use multiple bridge for mediation and hand off to solve roaming areas. This distance education system supports a real-time collaboration environment and IP multicasting by multimedia middleware for collaboration.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.4
• /
• pp.181-185
• /
• 2017

In this paper, for Broadband Wireles LAN dual-band antenna was designed to satisfy the bandwidth of 2.32GHz and 5.79GHz. the substrate of proposed microstrip antenna is FR-4(er=4.3) and $34mm{\times}50mm{\times}1.5mm$ size and thickness t=0.035mm, and the simulation was used for CST Microwave Studio 2014. input return loss compared -10dB less than operates at and when gain 2.32GHz -19.321dB, 5.79GHz showed the results of -13.033dB. It increased impedance matching, minimized interference between adjacent frequencies, simplified small manufacturing methods, and demonstrated the characteristics of non-directional properties. Thus the proposed antenna satisfied the -10 dB impedancebandwidth requirement while simultaneously covering the Broadband Wireless LAN.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.4
• /
• pp.837-846
• /
• 2013

Recently, new technologies based on wireless LAN is being studied because utilization on smart phone using Wi-Fi is increased. 802.11 b/g/a is universalized wireless LAN technologies based on ISM, the standard developed in 11's working group of IEEE 802. standardization about IEEE 802.11ac that overcame limitation on Blue-ray of IEEE 802.11n or uncompressed video transmission and IEEE 802.af's technologies using TVWS is being actively studied. In this paper, ability of transmission considering the security on AP operated by these technologies have measured and done a comparative analysis with existing wireless LAN environment ability of transmission measured when appling security is more stable than existing ability of transmission in an environment with obstacles and shorten of transmission time is confirmed as a result of analysis.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.6 s.324
• /
• pp.25-31
• /
• 2004

fireless LAN can offer high data rate communication between wireless terminals. In IEEE 802.11 wireless LAN, a basic service unit is called a Basic Service Set (BSS), which consists of one AP and more than one wireless terminals. Terminals far from the AP may not communicate with high data rate because signal strength is weakened as they move away from the AP. In this paper we propose a method to permit high speed data transmission by grouping terminals and by using part of wireless terminals as repeaters. We analyze the proposed and algorithm via simulations. Our proposed grouping mechanism is shown to be an effective way to increase the distance for high rate transmission.

• Journal of Advanced Navigation Technology
• /
• v.6 no.4
• /
• pp.296-305
• /
• 2002

This paper suggests the parameters of the requirement conditions of minimum performance for a RF transceiver system design from the specifications of IEEE Std 802.11b and IEEE Std 802.11a. It has yielded the requirement conditions of minimum performance in the design process due to these parameters. A RF transceiver system is simulated by using Agilent ADS(Advanced Design System) after selecting the components of optimal conditions to fabricate the RF transceiver system. The results of both the analysis and the simulation will be used for a real wireless LAN design.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.6
• /
• pp.599-603
• /
• 2016

Recently the wireless LAN system is substituting wired LAN system notably as the number of mobile users increases greatly along the advancement of technology. But the wireless LAN has a critical weakness in the security such as data leakage. Thus a safe security system is imperative to avoid threatening from hackers with offering the best convenience to inner users. In this research, we have developed a RADIUS wireless LAN security system for industrial applications, which performs the EAP authentication with the compatibility for any maker of wireless LAN. The system has interfaces based on WEB, providing DB access function for user management so that users can perform authentication of 802.1x in their computers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.9
• /
• pp.1551-1557
• /
• 2006

Since subscribers, who pay the same communication fees, have a strong desire to take similar services with the other users, it is an important issue to provide fairness among those subscribers wherever they are located. Therefore, in this paper we propose a QoS packet scheduler that can provide fairness among wireless LAN terminals and evaluate its performance using computer simulation. The key idea of this scheduler is to reduce the CW value of the wireless LAN terminal that has failed in sending its packets due to channel transmission error in order to offer the wireless MM terminal a higher transmission priority which is the idea of service compensation. We evaluate its performance using NS-2 network simulator, compare its numerical results to those of IEEE 802.11e without this scheme, and conclude that this scheme can reduce throughput difference between similar wireless LAN terminals.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.5
• /
• pp.416-425
• /
• 2002

In this Paper, It is analysed 5 GHz frequency characteristics that carry out interference experimental under the indoor environments for understanding propagation interference between existing 5 GHz band wireless communication system and 5 GHz band wireless LAN system. The interference signal which was generated by signal generator injected to 5 GHz Wireless LAN communication system measured interference characteristics and This radio propagation main interference factors were classified received power level separation by interference source frequency and interference source frequency pulse period & width separation. It is measured transmission rate according to variable data and packet size for conforming the quality of 5 GHz band wireless LAN system. We measured the packet data loss rate and power level of received signal and analyzed its frequency characteristics effected by interference signal.