• The KIPS Transactions:PartC
• /
• v.12C no.6 s.102
• /
• pp.917-926
• /
• 2005

In this paper, we propose a transport layer mobility support protocol for multimedia streaming services in mobile/wireless environments by extending PR-SCTP to support mobility. We named the proposed scheme to be uPR-mSCTP. The rules related to provide unordered and unreliable data transfer, as well as an approach to minimize handover latency we proposed. Through the simulation results, it is shown that, since uPR-mSCTP reduces transmission rates during handover, not only it reduces the waste of network resources, but it also has the packet loss rate similar to FMIPv6, which is a lot smaller than UDP over MIPv6 or HMIPv6 It also incurs smaller control packet overhead compared to the network layer mobility support approaches.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.597-604
• /
• 2002

Changing group key is necessary for the remaining members when a new member joins or a member leaves the group in multicast communications. It is required to guarantee perfect forward and backward confidentiality. Unfortunately, in large groups with frequent membership changes, key changes become the primary bottleneck for scalable group. In this paper, we propose a novel approach for providing efficient group key distribution in large and dynamic groups. Unlike existing secure multicast protocols, our protocol is scalable to large groups because both the frequency and computational overhead of re-keying is determined by the size of a subgroup instead of the size of the whole group, and offers mechanism to prevent the subgroup managers with group access control from having any access to the multicast data that are transfered by sender. It also provides security service for preserving privacy in wireless computing environments.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.1
• /
• pp.82-86
• /
• 2016

This paper proposes a method for the immobilization of motorbike brakes in conjunction with near-field communication (NFC) technology in order to meet the increasing demand for security and convenience of motorbike drivers. We thought about the concept of wireless key, NFC security devices and automatic solenoid valve for setting the lock and unlock module. This paper propose the design and development of an innovative anti-theft alarm system for motorcycles using NFC smart devices based on RFID system, the basis of IoT and AES(advanced encryption standard) encryption Algorithm. The design concept is based on NFC communication strategy between the vehicle and owner. To do this concept, we designed motorcycle smart key system with general-purpose NFC system and the automatic solenoid valve for setting the lock and unlock module. First, we designed control unit and NFC card reader for motorcycle smart key system. Then we propose an AES encryption algorithm and prove that the motorcycle key system is controllable by showing the result of implementing and testing, after installing.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.12 no.2
• /
• pp.15-24
• /
• 2016

GPS(Global Positioning System) location tracking is a method for taking the precise coordinates after the coordinates are obtained by a GPS receiver, and displaying them on the map. In this paper with WAVE(Wireless Access for Vehicular Environment) simulation, we show that various services such as vehicle tracking service, real-time road conditions service and logistics can go tracking service, control and operation services according to the vehicle position and the traveling direction by using the GPS position data. A vehicle tracking system using GPS is automatically able to manage multiple RCP when exchanging data between RMA and the RCP, and it provides rapid requests and responses. To verify that multiple sessions between RMA and RM, as well as multiple sessions between RMA and RCP are able to be implemented, we take RMA as a RCP application on an OBU, until the RMA is receiving data response from corresponding RM. As a result of this experiment, we show that the response speeds of single session between RMA and RM using 1, 2, 3, and 4 kbyte unit data are similar, 62.32ms, 62.65ms, 63.02ms, and 63.48ms, respectively. Likewise, those of 128 muliple sessions using 1, 2, 3, and 4 kbyte unit data are not much more time difference, 298.08ms, 302.21ms, 322.85ms, and 329.62ms, respectively.

• The Journal of the Korea Contents Association
• /
• v.8 no.5
• /
• pp.104-112
• /
• 2008

RFID/USN is considered important basic infra of ubiquitous community and tried practical adaption through various research. Specially, there is during researcher progresses for stock and state management of logistics to let you get at u-mart systems. It discern thing from warehouse to deliver as adhere RFID tag of palette in keeping unit of article and construct form of thing to analyze information of environment status using sence module based on function of wireless communication. in the paper, propose composition of customer satisfaction system using RFID chip in u-Mart status management system based on RFID/USN and according to analysis specific information of commodity, propose movement reader device to offer real-time information from customer. And it presents the improvement program for the provision of product information which is appropriate uses the RFID chip and the provision of control information in the customer who is a core of consuming.

• Journal of Biosystems Engineering
• /
• v.40 no.3
• /
• pp.165-177
• /
• 2015

Purpose: Accurate monitoring of soil strength is a key technology applicable to various precision agricultural practices. Soil strength has been traditionally measured using a cone penetrometer, which is time-consuming and expensive, making it difficult to obtain the spatial data required for precision agriculture. To improve the current, inefficient method of measuring soil strength, our objective was to develop and evaluate an in-situ system that could measure horizontal soil strength in real-time, while moving across a soil bin. Methods: Multiple cone-shape penetrometers were horizontally assembled at the front of a vertical plow blade at intervals of 5 cm. Each penetrometer was directly connected to a load cell, which measured loads of 0-2.54 kN. In order to process the digital signals from every individual transducer concurrently, a microcontroller was embedded into the measurement system. Wireless data communication was used between a data storage device and this real-time horizontal soil strength (RHSS) measurement system travelling at 0.5 m/s through an indoor experimental soil bin. The horizontal soil strength index (HSSI) measured by the developed system was compared with the cone index (CI) measured by a traditional cone penetrometer. Results: The coefficient of determination between the CI and the HSSI at depths of 5 cm and 10 cm ($r^2=0.67$ and 0.88, respectively) were relatively less than those measured below 20 cm ($r^2{\geq}0.93$). Additionally, the measured HSSIs were typically greater than the CIs for a given numbers of compactor operations. For an all-depth regression, the coefficient of determination was 0.94, with a RMSE of 0.23. Conclusions: A HSSI measurement system was evaluated in comparison with the conventional soil strength measurement system, CI. Further study is needed, in the form of field tests, on this real-time measurement and control system, which would be applied to precision agriculture.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.8
• /
• pp.2894-2909
• /
• 2015

As the number of mobile devices such as smart phones and tablets explodes, the need for new services or applications is also rapidly increasing. Smart class application is one of the emerging applications, in which most of contents are distributed to all members of a class simultaneously. It is highly required to select relay nodes to cover shadow area of radio as well as extend coverage, but existing algorithms in a smart class environment suffer from high control packet overhead and delay for exchanging topology information among all pairs of nodes to select relay nodes. In addition, the relay selection procedure should be repeated in order to adapt to the dynamic topology changes caused by link status changes or device's movement. This paper proposes the learning based relay selection algorithm to overcome aforementioned problems. The key idea is that every node keeps track of its relay quality in a fully distributed manner, where RQI (Relay Quality Indicator) is newly defined to measure both the ability of receiving packets from content source and the ability of successfully relaying them to successors. The RQI of each node is updated whenever it receives or relays broadcast packet, and the node having the higher RQI is selected as a relay node in a distributed and run-time manner. Thus, the proposed algorithm not only removes the overhead for obtaining prior knowledge to select relay nodes, but also provides the adaptability to the dynamic topology changes. The network simulation and experimental results prove that the proposed algorithm provides efficient and reliable content distribution to all members in a smart class as well adaptability against network dynamics.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.4
• /
• pp.1344-1367
• /
• 2014

Mobile traffic is increasing a masse because of the propagation of the Internet and the development of wireless mobile technology. Accordingly, the Network Local Mobility Management (NETLMM) working group [1] of the Internet Engineering Task Force (IETF) has standardized Proxy Mobile IPv6 (PMIPv6) [2] as a protocol for accomplishing the transmissibility of mobile terminals. PMIPv6 is a network-led IP-based mobility management protocol, which can control terminal mobility without depending on the type of access system or the capability of the terminal. By combining PMIPv6 and the mobility of Session Initiation Protocol (SIP), we can establish terminal mobility and session mobility through a more effective route. The mobility function can be improved and the overlap of function reduced as compared to that in the case of independent operation. PMIPv6 is appropriate for a non-real-time service using TCP, and SIP is appropriate for a real-time service using RTP/UDP. Thus, in the case of a terminal using both services, an effective mobility management is possible only by using PMIPv6 together with SIP. In order to manage mobility in this manner, researches on PMIPv6-SIP are in progress. In line with this trend, this paper suggests a new PMIPv6-SIP architecture where when a mobile terminal conducts a handover, a network-led handover while maintaining the session without the addition of a special function or middleware is possible along with effective performance evaluation through mathematical modeling by comparing the delay and the packet loss that occur during the handover to the Pure-SIP.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.2 no.2
• /
• pp.63-81
• /
• 2008

WiMAX has been introduced as a competitive alternative for metropolitan broadband wireless access technologies. It is connection oriented and it can provide very high data rates, large service coverage, and flexible quality of services (QoS). Due to the large number of connections and flexible QoS supported by WiMAX, the uplink access in WiMAX networks is very challenging since the medium access control (MAC) protocol must efficiently manage the bandwidth and related channel allocations. In this paper, we propose and investigate a cost-effective WiMAX bandwidth management scheme, named the WiMAX partial sharing scheme (WPSS), in order to provide good QoS while achieving better bandwidth utilization and network throughput. The proposed bandwidth management scheme is compared with a simple but inefficient scheme, named the WiMAX complete sharing scheme (WCPS). A maximum entropy (ME) based analytical model (MEAM) is proposed for the performance evaluation of the two bandwidth management schemes. The reason for using MEAM for the performance evaluation is that MEAM can efficiently model a large-scale system in which the number of stations or connections is generally very high, while the traditional simulation and analytical (e.g., Markov models) approaches cannot perform well due to the high computation complexity. We model the bandwidth management scheme as a queuing network model (QNM) that consists of interacting multiclass queues for different service classes. Closed form expressions for the state and blocking probability distributions are derived for those schemes. Simulation results verify the MEAM numerical results and show that WPSS can significantly improve the network’s performance compared to WCPS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.11
• /
• pp.2446-2452
• /
• 2012

In order to meet the recently enhanced emission standards at home and abroad, it is necessary to develop the CRDI ECU control algorithm that users can adjust fuel injection timing and amount in response to their needs. Therefore, this study developed the simulator for knocking analysis that enables knocking discrimination and engine balance correction applicable to the ECU exclusive to the industrial CRDI engine. The purpose of this study is to provide the driver-oriented diagnostic service that enable drivers to diagnose vehicles directly by developing diagnostic devices for vehicles with ths use of the results of the developed simulator for knocing analysis according to the OBD-II standards. For this purpose, this study aims to improve the fuel efficiency of vehicles by proposing the S/W design method of the OBD-II diagnosis device that can provide real-time communcations with the use of wired system and bluetooth module as a wireless system to send and recevice automobile fault diagnosis signal and sensor output signal, and to suggest an improvement for engine efficiency by minimizing the generation of harmful exhaust gas.