• 융합보안논문지
• /
• 제17권5호
• /
• pp.93-99
• /
• 2017

최근 국내외적으로 사물인터넷(IoT, Internet of Things) 서비스 산업은 매우 빠른 속도로 변화하고 성장해 나가고 있다. 본 논문은 IoT 서비스 산업의 변화와 함께 일어나고 있는 인류의 삶 속에서의 새로운 변화의 원동력이 무엇인가를 찾기 위해 노력하였다. 이렇게 시장 환경이 변화하는 가운데 경쟁도 글로벌 경쟁, 생태계 경쟁으로 그 양상이 확대되고 있으나, 글로벌 기업들의 플랫폼 선점과 고도의 생태계 발전 전략에 비해 국내 기업들의 생태계 구축 비전은 아직 뚜렷하지 않은 상황이다. 또한 IoT 서비스의 확산에 따른 모바일 네트워크에서의 IoT 서비스 연동이 요구되고 있다. IoT 보안 프로토콜은 무선과 유선을 연계하는 게이트웨이(Gateway)에서 전달되는 데이터의 모든 내용이 누출되는 보안상의 취약점이 있어 종단간 보안도 제공하지 못하는 단점이 있다. 이에 본 논문에서는 IoT와 인공지능(AI) 서비스 산업 생태계를 구성하고 있는 제반 요소의 현황을 살펴본 후, 이로부터 얻을 수 있는 보안 산업과 관련한 전략적 시사점을 제시해 보고자 한다.

• 전기전자학회논문지
• /
• 제23권3호
• /
• pp.1112-1115
• /
• 2019

본 논문에서는 정찰포탄의 활공날개에 적용할 수 있는 새로운 평판형 무지향성 마이크로스트립 안테나를 제안하였다. 제안한 안테나는 무지향성 방사패턴을 얻기 위하여 얇은 기판에 7개의 정육각형 공진기를 준원형을 배열한 구조를 가지고 있다. 안테나 기판의 하단부에 그물망 형태로 이루어진 접지선 구조를 적용하여, 안테나의 공진주파수와 임피던스 대역폭에 관한 연구를 수행하였다. 그물망 형태의 접지선 구조의 유효성을 검증하기 위하여, 접지선의 선폭을 이론적으로 분석하여 상대 대역폭, Q-factor 및 안테나 이득을 만족시키기 위한 최적화 기법을 수행하였다. 제안한 안테나는 모의실험결과와 유사한 측정결과를 보임으로써, 무지향성 방사패턴이 잘 형성됨을 시연하였다. 마지막으로 제작한 안테나 시제품은 5.77 GHz를 중심으로 약 5.65%의 상대대역폭에 해당하는 326 MHz의 동작대역폭을 확인하였으며, 공진주파수 5.84 GHz에서 5.49 dBi의 안테나 이득을 확인하였다.

• 보존과학회지
• /
• 제36권6호
• /
• pp.483-493
• /
• 2020

X-선을 이용한 비파괴 조사와, 현미경 조사를 통해 고려 나전국화넝쿨무늬합(고려나전합)의 구조와 제작기법을 확인하고, 보존상태를 파악하였다. 조사결과, 고려 나전국화넝쿨무늬합은 침엽수재를 바탕재료로 사용하였으며, 목재 위에는 직물을 바른 뒤에 옻칠을 한 것으로 확인되었다. 합의 구조는 판재를 반화형으로 가공한 뒤에 측면에 목재를 덧붙여서 제작하였고, 측벽으로 사용한 부재는 일정한 간격으로 칼집을 내어서 곡선형으로 가공하기 용이하게 만든 것으로 확인되었다. 나전의 가공은 주름질을 사용하였으며, 대모장식에는 복채기법이 사용되었다. 금속선은 단선과 착선이 사용되었다.

• 한국재료학회지
• /
• 제32권3호
• /
• pp.161-167
• /
• 2022

A cold roll-bonding process is applied to fabricate an AA6061/AA5052/AA6061/AA5052 layered sheet. Two AA6061 and one AA5052 sheets of 2mm thickness, 40mm width and 300mm length are alternately stacked, then reduced to a thickness of 2.0 mm by multi-pass cold rolling after surface treatment such as degreasing and wire brushing. The rolling is performed at ambient temperature without lubricant using a 2-high mill with a roll diameter of 400 mm at a rolling speed of 6.0 m/sec. The roll-bonded AA6061/AA5052/AA6061/AA5052 layered sheet is then hardened by natural aging (T4) and artificial aging (T6) treatments. The microstructure of the as-roll bonded and the age-hardened Al sheets was revealed by SEM observation; the mechanical properties were investigated by tensile testing and hardness testing. After T4 and T6 aging treatment, the specimens had a recrystallization structure consisting of coarse equiaxed grains in both AA5052 and AA6061 regions. The as-roll-bonded specimen showed a clad structure in which the hardness of AA5052 regions was higher than that of AA6061 regions. However, after T4 and T6 aging treatment, specimens exhibited different structures, with hardness of AA6061 regions higher than that of AA5052 regions. Strengths of T6 and T4 age-treated specimens were found to increase by 1.55 and 1.36 times, respectively, compared to the value of the starting material.

• Journal of Digestive Cancer Research
• /
• 제2권1호
• /
• pp.1-4
• /
• 2014

Palliative care for cancer aims to relieve the discomfort and pain from the cancer itself and associated conditions. Gastrointestinal cancers originate from the tube like structure of gastrointestinal tract and cause complications such as obstruction, bleeding, adhesion, invasion, and perforation to adjacent organ. Recent advances in interventional endoscopy enables endoscopy physicians to do safe and effective care for gastrointestinal cancer patients. Endoscopic palliation includes stent, hemostasis, nutritional support and targeted drug delivery. Self expandable metallic stent is one of the most important modalities in gastrointestinal palliation. Through the endoscopy or over the wire pre-placed by endoscopy, stents restore the gastrointestinal luminal patency and relieve the obstructive condition. Endoscopic hemostasis is another important palliation in gastrointestinal cancer patients. Epinephrine injection, argon plasma coagulation and thermal cauterization are usual modalities for hemostasis. Histoacryl glue and fibrin glue are also available. Hemostatic nanopowder spray is newly reported effective in benign disease and is supposed to be effective also in cancer bleeding. Enteral feeding tubes including gastro- or jejunostomy and nosoduodenal tubes are placed by using endoscopic guidance. Enteral feeding tubes role as the route of easily absorbable or semi-digested nutrients and effectively maintain both patients calorie requirements and gut microenvironment. Photodynamic therapy is the one of the outstanding medical employments of photo-physics. Especially for superficial cancers in esophagus, photodynamic therapy is very useful in cancer removal and maintaining organ structure. In biliary neoplasm, photodynamic therapy is well known to be effective in cancer ablation and biliary ductal patency restoration. Targeted drug delivery is the lastest issue in palliative endoscopy. Debates and questions are still on the table. In this article, the role of endoscopic interventions in palliative care for the gastrointestinal tumors will be thoroughly reviewed.

• 한국재료학회지
• /
• 제33권12호
• /
• pp.565-571
• /
• 2023

AA1050/AA6061/AA1050 layered sheet was fabricated by cold roll-bonding process and subsequently T4 and T6 aging-treated. Two commercial AA1050 sheets of 1 mm thickness and one AA6061 sheet of 2 mm thickness were stacked up so that an AA6061 sheet was located between two AA1050 sheets. After surface treatments such as degreasing and wire brushing, they were then roll-bonded to a thickness of 2 mm by cold rolling. The roll-bonded Al sheets were then processed by natural aging (T4) and artificial aging (T6) treatments. The as roll-bonded Al sheets showed a typical deformation structure, where the grains are elongated in the rolling direction. However, after the T4 and T6 aging treatments, the Al sheets had a recrystallized structure consisting of coarse grains in both the AA5052 and AA6061 regions with different grain sizes in each. In addition, the sheets showed an inhomogeneous hardness distribution in the thickness direction, with higher hardness in AA6061 than in AA1050 after the T4 and T6 age treatments. The tensile strength of the T6-treated specimen was higher than that of the T4-treated one. However, the strength-ductility balance was much better in the T4-treated specimen than the T6-treated one. The tensile properties of the Al sheets fabricated in the present study were compared with those in a previous study.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제27권4호
• /
• pp.321-329
• /
• 2001

안면 비대칭이나 반안면 왜소증등과 같은 악변형증 환자의 진단 및 치료계획을 수립함에 있어서 종합적이고도 3차원적인 접근을 하는 것이 중요하다. 최근 3차원 CT가 개발되었으나 이 경우 계측점의 정확성이 아직 확립되어 있지 않다. 최근들어 두부 위치를 보정하여 다른 시기에 촬영된 방사선 사진을 3차원적으로 비교할수 있도록 하는 방법이 소개되었다. 이러한 방법을 이용하여 얻어진 3차원 좌표값 자동적으로 계산한 후 3차원적 구조 분석 및 계측을 할 수 있는 컴퓨터 프로그램을 개발하였다. 이 프로그램은 정중면을 설정하는 개념에 입각하여 안면구조물의 변형정도를 다양한 방법으로 나타낼수 있으며 이러한 기능은 특히 안면 비대칭의 분석과 술전, 후 비대칭의 정도를 파악하는데 유용한 것으로 보인다.

• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.674-682
• /
• 2018

노후된 철근콘크리트 항만 구조물을 보수보강하기 위한 기존의 공법 대부분은 염기침투와 균열발생을 막기 위한 목적으로 개발되었으며 슬래브나 보 하부를 섬유복합체나 섬유복합체 패널로 벽지 바르듯 빈틈없이 접착시키는 공정으로 이루어져 있다. 하지만 이런 공법들은 섬유제품의 밀폐성 때문에 항만구조물 상부에서 유입되는 빗물 등의 수분을 외부로 배출시키지 못한다. 배출되지 않은 물은 보수보강 부위를 물통역할을 하게 되어 슬래브나 보의 피복콘크리트 전체를 탈락시키는 문제를 발생케 한다. 이에 본 연구진은 선행연구에서 콘크리트 구조물 내부로 유입된 수분을 배출하는 물배출 앵커 및 트랩볼트를 개발하였다. 하지만 앵커볼트의 매입부분의 수분은 배출되지 않아 잔류수분 문제가 발생하였다. 본 연구에서는 이런 잔류수분 문제를 해결하기 위해 기 개발된 물배출 앵커 및 트랩볼트 측면에 홀을 추가로 천공하는 여러 대안을 제시하였다. 또한 보수보강 현장에서 물배출 앵커를 적용할 경우 앵커의 설계하중 적용을 위해 인장강도시험, 인발강도시험을 수행하였고, 배수성능시험을 통해 최적의 성능개선 형 물배출 앵커 및 트랩볼트를 개발하였다.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 추계학술대회 논문집
• /
• pp.98-104
• /
• 2000

The conventional model did not take momentum conservation into consideration when the electron absorbs and emits the photons. II-ray provides momentum conservations on any directions of the entering photons, and also the electrons have radial momentum conservations and fully elastic bouncing between two atoms, in the new atom model. Conventional atom model must be criticized on the following four points. (1) Natural motions between positive and negative entities are not circular motions but linear going and returning ones, for examples sexual motion, tidal motion, day and night etc. Because the radius of hydrogen atom's electron orbit is the order of 10$^{-11}$ m and the radia of the nucleons in the nucleus are the order of 10$^{-14}$ m and then the converging $\pi$-gamma rays to the nucleus have so great circular momentum, the electron can not have a circular motion. We can say without doubt that any elementary mass particle can have only linear motion, because of the $\pi$-rays'hindrances, nearthenucleus. (2) Potential energy generation was neglected when electron changes its orbit from outer one to inner one. The h v is the kinetic energy of the photo-electron. The total energy difference between orbits comprises kinetic and potential energies. (3) The structure of the space must be taken into consideration because the properties of the electron do not change during the transition from outer orbit to inner one even though it produces photon. (4) Total energy conservation law applies to the energy flow between mind and matter because we daily experiences a interconnection between mind and body. Conventional Concept of Electric Field must be extended in the case of the direct and alternating current. Conventional concept is based on coulomb's force while the electric potential in the direct and alternating current is from Gibb's free energy. And also conventional concept has not any consciousness with human being but the latters has a conscious sensibility. The cell emf is from the kinetic energy of the open $\pi$-rays flow through the conducting wire. The electric potential in alternating current is from that the trans-orbital moving of the induced change of magnetic field in the wire produces flows of open $\pi$-rays, which push the rotating electrons on the orbital and then make the current flow. Human consciousness can induce a resonance with the sensibility of the open $\pi$-rays in the electric measuring equipment. Specially treated acupunctures with Nasucon is for sending an acupunctural effect from one place to another via space by someone's will power.

• 전기학회논문지P
• /
• 제59권4호
• /
• pp.434-439
• /
• 2010

This study fabricated a simulation facility which reduced the structure of a current distribution line to 50:1 in order to analyze the induced lightning shielding effect of a 22.9kV-Y distribution line according to ground resistance capacity, grounding locations, etc. When installing an overhead ground wire, the standard for grounding a distribution line with a current of 22.9kV-Y requires that ground resistance in common use with the neutral line be maintained less than $50\Omega$every 200m span. The reduced line for simulation had 7 electric poles and induced lightning was applied to the ground plane 2m apart from the line in a direction perpendicular to it using an impulse generator. If induced voltage occurred in the line and induced current flowed through the line due to the applied current, the induced voltage and current of the 'A' phase were measured respectively using an oscilloscope. When all 7 electric poles were grounded with a ground resistance of less than $50\Omega$ respectively, the combined resistance of the line was $7.4\Omega$. When an average current of 230A was applied, the average induced voltage and current measured were 1,052V and 13.8A, respectively. Under the same conditions, when the number of grounding locations was reduced, the combined resistance as well as induced voltage and current showed a tendency to increase. When all 7 electric poles were grounded with a ground resistance of less than $100\Omega$, the combined resistance of the line was $14.9\Omega$. When an average current of 236A was applied, the average induced voltage and current of the 'A' phase calculated were 1,068V and 15.6A, respectively. That is, in this case, only the combined resistance was greater than when all 7 electrical poles were grounded, and the induced voltage and current were reduced. Therefore, it is thought that even though ground resistance is slightly higher under a construction environment with the same conditions, it is advantageous to ground all electric poles to ensure system safety.