• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2001년도 추계 학술발표회 논문집 Proceedings of EESK Conference-Fall 2001
• /
• pp.36-43
• /
• 2001

In Korea, we are absolutely short of earthquake data in good quality from moderate and large earthquakes, which are needed fur the study of strong ground motion characteristics. This means that the best use of the available data is needed far the time being. In this respect, several methods are suggested in this paper, which can be applied in the process of data selection and analysis. First, it is shown that the calibration status of seismic stations can be easily checked by comparing the spectra from accelerometer and velocity sensor both of which are located at the same location. Secondly, it is recommended that S/N ratio in the frequency domain should be checked before discarding the data by only look of the data in time domain. Thirdly, the saturated earthquake data caused by ground motion level exceeding the detection limit of a seismograph are considered to see if such data can be used for spectrum analysis by performing numerical simulation. The result reveals that the saturated data can still be used within the dominant frequency range according to the levels of saturation. Finally, a technique to minimize the window effect that distorts the low frequency spectrum is suggested. This technique involves detrending in displacement domain once the displacement data are obtained by integration of low frequency components of the original data in time domain. Especially, the low frequency component can be separated by using discrete wavelet transform among many alternatives. All of these methods mentioned above may increase the available earthquake data and frequency range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.1470-1471
• /
• 2008

We present a front-side micromachined thermopile with high sensitivity in the 3-5${\mu}m$ window, and discuss its application to a novel non-dispersive infrared (NDIR) $CO_2$ gas sensor with a light source emitting collimated light. The micromachined thermopile shows a measured sensitivity of 30 mV/W and a $D^*$ of $0.3{\times}10^8cm^{\surd}Hz/W$. Using this newly fabricated thermopile, we also have successfully developed a small, sensitive NDIR $CO_2$ detector module for accurate air quality monitoring systems in energy-saving building and automotive applications. The novel sample cavity comprising specular reflectors around the light bulb is configured to uniformly emit collimated light into the entrance aperture of the cavity in order to enhance the sensitivity of NDIR $CO_2$ detector.

• KIEAE Journal
• /
• 제6권4호
• /
• pp.25-32
• /
• 2006

Mock-up model can be applied to measure accurate performance data but difficult to apply the variables in experiment. There can be a slight experiment errors in Scale model, but various parameters can be applied for a objective experiment. This paper aims to compare the daylighting performance in 1, 1/5, 1/10 scale model of offices and analyze the experiment errors to certificate the influence of model experiment. To analyse daylighting performance, a comparison of a Mock-up model, sized $12.0m(w){\times}7.2m(l){\times}3.7m(h)$, designed for experimentation of daylighting systems and its 1:5, 1:10 scale model. It has an identical configuration of reference room and the test room. For the test room, the lightshelf system was designed as Micro-4 reflective material. To assess work plane illuminance and light factor, photometric sensors of each room were installed at work-plane(6 points) and exterior horizontal illuminance (1 point). And luminance of window, rare of the room was measured under clear sky. It is to be monitored by Agilent data logger, photometric sensor Li-cor and the Radiant Imaging ProMetric 1400. Comparisons with a light factor, increase-decrease ratio and luminance are discussed.

• Journal of Mechanical Science and Technology
• /
• 제18권7호
• /
• pp.1055-1061
• /
• 2004

In this research, a vision system for detecting breakages of small-diameter taps, which are rarely detected by the indirect in-process monitoring methods such as acoustic emission, cutting torque and motor current, was developed. Two HMI (Human Machine Interface) programs to embed the developed vision system into a Siemens open architecture controller, 840D, were developed. They are placed in sub-windows of the main window of the 840D and can be activated or deactivated either by a softkey on the operating panel or the M code in the NC part program. In the event that any type of tool breakage is detected, the HMI program issues a command for an automatic tool change or sends an alarm signal to the NC kernel. An evaluation test in a high-speed tapping machine showed that the developed vision system was successful in detecting breakages of small-diameter taps up to M1.

• Journal of electromagnetic engineering and science
• /
• 제18권2호
• /
• pp.94-100
• /
• 2018

Partial discharges (PDs) are electrical sparks that occur inside insulation between two conducting electrodes and can lead to the disastrous failure of insulation systems. To determine the location of a PD, a distributed array of UHF PD sensors is used to detect the electromagnetic (EM) signals emitted from the PD source, and the localization of the PD source can be estimated using the time difference of arrival (TDOA) between EM signals captured by the UHF PD sensor array. There are four popular methods to estimate the TDOA-the first peak method, the cross-correlation method, the energy criterion method, and the average time window threshold method. In this work, we numerically investigate the influence of noise on estimating the TDOA for the four different methods. Numerical results show that the energy criterion method is more robust against noise than other methods.

• 센서학회지
• /
• 제22권5호
• /
• pp.338-345
• /
• 2013

Premature ventricular contractions are the most common of all arrhythmias and may cause more serious situation like ventricular fibrillation and ventricular tachycardia in some patients. Therefore, the detection of this arrhythmia becomes crucial in the early diagnosis and the prevention of possible life threatening cardiac diseases. Most methods for detecting arrhythmia require pp interval, or the diversity of P wave morphology, but they are difficult to detect the p wave signal because of various noise types. Thus, it is necessary to use noise-free R wave. So, the new approach for the detection of PVC is presented based on the rhythm analysis and the beat matching in this paper. For this purpose, we removed baseline wandering of low frequency band and made summed signals that are composed of two high frequency bands including the frequency component of QRS complex using the wavelet filter. And then we designed R wave detection algorithm using the adaptive threshold and window through RR interval. Also, we developed algorithm to classify PVC using RR interval. The performance of R wave and PVC detection is evaluated by using MIT-BIH arrhythmia database. The achieved scores indicate average detection rate of 99.76%, sensitivity of 99.30% and specificity of 98.66%; accuracy respectively for R wave and PVC detection.

• 센서학회지
• /
• 제28권2호
• /
• pp.117-120
• /
• 2019

Graphene is recognized as a promising material for silicon photonics, since it has a wide optical-window that entirely covers the optical communication wavelength region ($1.3{\sim}1.6-{\mu}m$) and extremely high-carrier mobility that makes it possible to fabricate the high-speed photodetectors. However, the maximum absorbance of monolayer graphene is only 2.3%, which limits the photoresponse characteristics of graphene photodetectors. As a result, a low photoresponsivity of graphene photodetector is a critical issue limiting the use of graphene photodetectors in the optical communications field. In this paper, we investigated effects of optically-modulated metal-graphene contact on the photoresponsivity of graphene photodetectors. The optical modulation of the contact resistance mainly determined the photoresponse characteristics of graphene photodetectors. The Ni-contact graphene photodetector which has a characteristic of the significant optical modulation of metal-graphene contact showed a higher photoresponsivity than the Pd-contact device. This work will provide a way to improve the photoresponse characteristics of graphene-based photodetector and contribute to the development of high-speed/high-responsivity graphene photodetector.

• Current Optics and Photonics
• /
• 제3권2호
• /
• pp.154-163
• /
• 2019

In this study, we developed an optical sighting system capable of shooting at a long-distance target by operating a digital gyro mirror composed of a gyro sensor and an FSM. The optical sighting system consists of a reticle part, a digital gyro mirror (FSM), a parallax correction lens, a reticle-ray reflection mirror, and a partial reflection window. In order to obtain the optimal volume and to calculate the leading angle range according to the driving angle of the FSM, a calculation program using Euler rotation angles and a three-dimensional reflection matrix was developed. With this program we have confirmed that the horizontal leading angle of the developed optical sighting system can be implemented under about ${\pm}8^{\circ}$ for the maximum horizontal driving angle (${\beta}={\pm}12.5^{\circ}$) of the current FSM. Also, if the ${\beta}$ horizontal driving angle of the FSM is under about ${\pm}15.5^{\circ}$, it can be confirmed that the horizontal direction leading angle can be under ${\pm}10.0^{\circ}$. If diagonal leading angles are allowed, we confirmed that we can achieve a diagonal leading angle of ${\pm}10.0^{\circ}$ with a vertical driving angle ${\alpha}$ of ${\pm}7.1^{\circ}$ and horizontal driving angle ${\beta}$ of ${\pm}12.5^{\circ}$.

• 마이크로전자및패키징학회지
• /
• 제24권4호
• /
• pp.23-29
• /
• 2017

본 연구에서는 선박이송용 트레슬의 표면에 부착할 수 있는 광섬유센서 패키지를 설계하고 파장다중분할방식에 기초한 센서 네트워크를 설계한 후, 모의 트레슬 유닛을 이용한 실험을 통하여 트레슬의 구조적 건전 모니터링을 위한 스마트 트레슬의 가능성을 확인하였다. 광섬유 브래그 격자 센서는 알루미늄 관으로 만들어진 원통형으로 패키징 되었다. 또한, 패키징 된 광섬유 센서를 폴리머 튜브에 삽입 한 후, 튜브 내부에 에폭시를 충전하여 센서가 해수에 대한 부식저항과 내구성을 갖도록 하였다. 패키지 된 광섬유 센서는 0.2 MPa 하의 수압테스트를 통하여 해수에서의 사용에 대한 신뢰성도 검증되었다. 트레슬의 변형에 관한 유한 요소 해석에 의해 얻어진 트레슬 부재의 변위가 큰 곳을 중심으로 트레슬에 부착할 브래그 격자의 수와 위치를 결정하였다. 최대 하중이 가해지는 트레슬 부재의 변형은 ${\sim}1000{\mu}{\varepsilon}$의 변형율로 분석되었으며, 그 때 트레슬에 걸리는 최대 하중으로 인한 센서의 브래그 파장 변화는 ~1,200 pm으로 계산되었다. 유한 요소 해석에서 얻은 결과에 따라 센서의 브래그 파장 간격을 3~5 nm로 결정하여 트레슬에 하중이 가해 졌을 때 센서 사이의 브래그 격자 파장값이 겹치지 않도록 설계하였다. 5개의 광섬유센서 패키지로 구성된 센서 모듈 5개를 연결하면 브래그 격자 센서 50개가 네트워크 될 수 있으므로, 브래그 격자 파장 검출기의 광원 중심 파장이 1550 nm에서 150 nm 광학 창 내에서 모두 검출될 수 있도록 하였다. 모의 트레슬 유닛에 부착 된 5개의 광섬유 센서 패키지의 브래그 파장 이동은 광섬유 루프미러를 사용하는 브래그 격자 파장검출기에 의해 잘 검출되었으며, 그 때 검출된 브래그 격자 센서의 값은 최대 변형률이 약 $235.650{\mu}{\varepsilon}$로 측정되었다. 센서 패키징과 네트워킹의 모델링 결과는 실험 결과와 서로 잘 일치하였다.

• 생물환경조절학회지
• /
• 제24권4호
• /
• pp.308-316
• /
• 2015

최근 관심이 집중되고 있는 스마트온실의 기술적용 실태와 문제점을 파악하고 이를 토대로 단동온실의 ICT 기술적용 장애요인 극복과 생산성을 제고하기 위하여 실험을 수행하였다. 자동화 시설의 도입 장애요인으로는 시설비 부담(24%)이 높았으며, 설치업체 사후관리 미흡(19%), 잦은 고장(16%), 관리기술 미흡(15%), 기능 미흡(13%), 소득향상기여 미흡(12%) 순이었다. ICT 도입필요성은 노동력절감(15%)이 가장 높았다. 자동화 온실에서 문제가 발생되는 부분은 온실구조, 구동기제어, 복합환경제어기, 센서기술이 각 14%로 비슷하였고, 원격제어기술 13%, 작물관리기술 12%, 에너지절감기술 10%, 소프트웨어활용 8%이었다. 온실구조 측면에서의 문제점은 천창개선이 18%로 가장 많았다. 효율적인 온도 및 환기 제어를 위해 농촌진흥청 고시 10-단동-7형 온실에 랙피니언 천창을 추가하였으며, 지붕형태를 복숭아형으로 변경하였다. 온실내 환경의 균일성을 위해 공기 유동팬은 6대를 설치하도록 하되 필요에 따라 증설 가능하도록 하였으며, 에너지 절약을 위해 1, 2중은 두께 0.1mm필름을 사용하고 3중은 5겹보온커튼을 설치하였다. CFD 유동해석 결과, 측창이 열린조건에서는 풍상 방향의 평균 유속이 빠르고 온도가 낮았으며, 풍하 방향으로 멀어 질수록 평균 유속이 점차 느려지고 온도는 높게 나타났다. 반면, 측창이 닫힌조건에서는 평균 유속이 낮으며, 구역별로 큰 편차는 없었다. 다만 풍상 풍하의 천창이 모두 열린 조건에 비하여 풍하 방향의 천창만 열린조건이 영역별 평균 유속에서 더 높은 값을 보였다. 측창을 닫은 조건에서는 외기의 유동이 아닌 온실 내 설치된 환기용 유동팬에 의해 유속이 발생하며 외부 환기가 없는 조건에서 유동팬에 의한 순환은 실내 전체 공간의 유동 편차를 줄여 줄 수는 있지만 전체적인 온도에는 영향을 미치지 못하였다. 저측고의 영역별 평균 온도는 고측고보다 균일하게 나타났다. 겨울철 3중 다겹보온커튼 여닫음에 관계없이 유동팬 근처에서 유속이 높고 유동팬에서 멀어지면 유속이 거의 없는 것으로 나타났다. 또한, 시간경과에 따른 평균 온도는 3중다겹보온커튼 열림상태에서 약 2시간 후에 외부온도와 같아졌으나 닫힘상태에서는 5시간 이후에 외부온도와 같아져, 3중 다겹보온커튼의 보온효과가 뚜렷하였다. 같은 조건에서 열용량의 차이로 인해 저측고 온실이 고측고 온실에 비하여 온도 하강 속도가 빨랐다.