• 제목/요약/키워드: Winding technique

검색결과 157건 처리시간 0.033초

몰드변압기용 부분방전 측정 센서 및 시스템 개발 (Development of Partial Discharge Measuring Sensor and System for Mold Transformer)

  • 강동식;선종호;조국희;이상민;윤영호;이동준;어수영;김주현;최교남
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 추계학술대회 논문집 전기설비전문위원
    • /
    • pp.99-102
    • /
    • 2005
  • In order to development of diagnosis system for mold transformer, partial discharge measurement technique is recommended the best effective method for the evaluation of insulation condition on high voltage winding part. However, this technique was not applied to mold transformer yet. The purpose of this paper is to describe the method of partial discharge measurement for mold transformer with coupling sensor and measuring system. As we reviewed and developed the on-line partial discharge test technique, ceramic coupling sensor, measuring system, terminal box and index parameters.

  • PDF

최소자승법을 이용한 Y-$\Delta$ 변압기 파라미터 추정 방법 (Parameter Estimation of Y-$\Delta$ Transformer Using the Least Square Method)

  • 강용철;황태근;이병은;장성일;김용균
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.42-43
    • /
    • 2007
  • This paper proposes a parameter estimation technique of a power transformer. Based on the combined equation, it estimates separately the primary and secondary leakage inductances, winding resistances using the least square method from the instantaneous voltages and currents in the steady state. The performance of the proposed technique was investigated by varying the cut-off frequency of the filter and the number of samples per cycle. The technique estimates the parameters with higher sampling frequencies.

  • PDF

중국내 묘족의 직물에 나타난 기법과 문양 고찰 (The Study on Technique and Design Appeared in Textile of Miaos in China)

  • 부애진;홍정민
    • 복식
    • /
    • 제37권
    • /
    • pp.149-162
    • /
    • 1998
  • This study is thed Embroidery, Cross-stitchery, Weaving, Wax-Printing of technique and design appeared in textile of Miaos dwells in south-west among the minority people of china. The study is as follows. First, the technique of textile1) satin stitch, couching stitch, french-knot stitch, etc. using anther silk thread or cotton thread color 2) cross-stitchery 3) hand-weaving technique which is shaped other warp or weft using simple loom 4) the technique of dyeing of pattern using effect with wax. These methods are singly used mixing together, therefore doubled beauty. Second, these technuque of ornament have other independence, specially ornament apron, sling, sleeve borders, slack borderss, edge of upper garment, take off and put on easily, heighten effect of various ornament, can preserve many years. Third, Maker, female born in this country fashion by need of herself, used liberal method shown in unique creativity of life. This texture make standards capable female proud of intelligent and skill of herself. Fourth, Design appeared in textile like as pattern flying bird in the sky, strolling beast in the field, lion rolling gem, laughing dragon winding snake at gem, birks, flowers, fish, butterfly is used as the wish of long life, a lucky sign. They expressed creativity and unique conception using formation : the technique transform other shape using by omitting or adding or overestimating. Geometric pattern of tartan, revealing, Fifth, composition structure having balance and symmetry or contradiction towards center and circumstance of the center harmonized repeatedly method, expressed unique artful attraction by full composition.

  • PDF

두꺼운 복합재료 실린더의 생산 및 열응력 해석 (Continuous Curing and Residual Stresses of Thick Composite Cylinders)

  • 김철
    • 한국복합재료학회:학술대회논문집
    • /
    • 한국복합재료학회 2000년도 춘계학술발표대회 논문집
    • /
    • pp.49-52
    • /
    • 2000
  • A new composite manufacturing technique which combines winding and curing together is studied and analyzed. This method is especially suited to the manufacture of thick composite materials in which thermal spiking is a common problem. An experimental apparatus was designed and built for use with a filament winder to continuously cure a thick composite cylinder. A hoop-wound composite cylinder with 152 mm wall thickness was manufactured and embedded thermocouples and strain gages were monitored throughout the cure process. The experimental data were compared with analytical results.

  • PDF

자기회귀 웨이블릿 신경망을 이용한 풍력 발전 시스템의 적응 속도 제어기 설계 (Design of Adaptive Velocity Controller for Wind Turbines Using Self Recurrent Wavelet Neural Network)

  • 송승관;최윤호;박진배
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 제39회 하계학술대회
    • /
    • pp.1691-1692
    • /
    • 2008
  • In this paper, the adaptive neural network technique is proposed to control the speed of wind power generation system. For maximizing generated power effectively, adaptive neural algorithm based on SRWMM(Self Recurrent Wavelet Neural Network) is derived to on-line adjust the excitation winding voltage of the generator. Through computer simulations, it is shown that the proposed method can achieve smooth and asymptotic rotor speed tracking.

  • PDF

풍력터빈시스템의 적응백스테핑 속도제어기 설계 (Design of an Adaptive Backstepping Speed Controller for Wind Turbine System)

  • 현근호;손인환
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 학술대회 논문집 전문대학교육위원
    • /
    • pp.128-131
    • /
    • 2005
  • In this paper a robust controller using adaptive backstepping technique is proposed to control the speed of a wind turbine system. To make wind power generation truly cost effective and reliable, advanced and robust control algorithms are derived to on-line adjust the excitation winding voltage of the generator based on both mechanical and electrical dynamics. This method is shown to be able to achieve smooth and asymptotic rotor position tracking, as justified by analysis.

  • PDF

풍력발전시스템의 적응백스테핑 위치제어기 설계 (Design of an Adaptive Backstepping Position Controller for the Wind Power Generation System)

  • 현근호
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2007년도 제38회 하계학술대회
    • /
    • pp.1227-1229
    • /
    • 2007
  • In this paper a robust controller using adaptive backstepping technique is proposed to control the position of wind power generation system. To make wind power generation truly cost effective and reliable, advanced and robust control algorithms are derived to on-line adjust the excitation winding voltage of the generator based on both mechanical and electrical dynamics. This method is shown to be able to achieve smooth and asymptotic rotor speed tracking, as justified by analysis and computer simulation.

  • PDF

권선 단락 및 스위치 개방 고장 시의 인버터 구동 영구자석 동기전동기의 고장 진단 기법 (A Fault Diagnosis Technique of an Inverter-fed PMSM under Winding Shorted Turn and Inverter Switch Open Fault)

  • 김경화
    • 조명전기설비학회논문지
    • /
    • 제24권5호
    • /
    • pp.94-105
    • /
    • 2010
  • 인버터 구동 영구자석 동기전동기에서 고정자 권선과 인버터 스위치에 고장이 존재할 때 동작 중 실시간으로 고장을 검출하고 고장의 유형을 판별할 수 있는 진단 기법이 제시된다. 제안된 기법은 q축 전류의 2차 고조파를 실시간으로 관찰함으로써 이루어지며 고장이 없는 정상 조건에서의 고조파 데이터와 비교를 통해서 고장을 판별한다. 임의의 정상 동작 조건에서의 고조파 데이터는 선형 보간법을 이용해 구해진다. 고장 검출 시 진단 알고리즘은 고장 유형 판별모드로 전환되어 상전류의 파형 분석을 통해 고장의 유형을 판별한다. 제안된 고장 검출 기법의 타당성을 입증하기 위해 내부 권선 단락이 가능한 전동기가 제작되었으며 전체 시스템과 고조파 분석 및 고장 검출 알고리즘이 DSP TMS320F28335에 의해 구현된다. 제안된 방법은 부가적인 진단 장비를 요구하지 않으며 정상상태 조건이 만족된다면 동작 중 실시간으로 고장을 검출할 수 있다.

한국 포타쉬 유리구슬의 조성 분류에 따른 특성 비교 (Characteristic Comparison of the Composition Classification on Potash Glass Beads Excavated in Korea)

  • 김나영;김규호
    • 보존과학회지
    • /
    • 제31권3호
    • /
    • pp.255-265
    • /
    • 2015
  • 본 연구에서는 지금까지 자연과학적 분석을 통해 확인된 30개 유적의 281점 포타쉬유리에 대하여 화학 조성에 따라 유형을 분류하고 색상, 크기, 제작 기법 그리고 유통 시기를 비교하였다. 한국의 포타쉬유리는 안정제 함량에 따라 3가지 유형으로 구분된다. I, II형은 CaO와 $Al_2O_3$ 함량이 모두 5% 미만으로 상대적으로 I형은 CaO 함량이 높고 II형은 $Al_2O_3$ 함량이 높다. 이와 달리 III형은 CaO를 5% 이상 포함한다. 이들은 융제를 첨가하기 위해 I, II형이 초석, III형이 식물 재를 원료로 사용한 것으로 추정된다. 유형별 특성에서, I형은 감청색, 벽색 및 청록색, 자색을 띠고 외경이 1.4~7.4mm까지 다양한 크기가 확인된다. 늘인 기법에 의해 제작되었으며 가장 빠른 BC 1C경 출현하여 AD 6C까지 지속적으로 유통된 것으로 나타났다. 반면 II형은 벽색 및 청록색을 띠며, 외경이 1.9~3.6mm 정도의 소형 구슬이다. 제작 기법은 I형과 동일하며 AD 1C경 나타나 4C경 단절되는 양상을 보인다. 마지막으로 III형은 갈색, 무색, 황색을 띠며 외경이 대략 10mm 전후에 달하는 대형 구슬이다. 말은 기법에 의해 성형되었으며 고려 및 조선시대 민묘에서 등장한다. 이상의 결과에서 한국에서 유통된 3가지 유형의 포타쉬유리는 각기 다른 생산지에서 다양한 교역 루트를 통해 유입된 것으로 판단된다.

화력 발전기 고정자 권선에서의 수소 압력에 따른 부분 방전 특성 (The Effect of Hydrogen Pressure on Partial Discharge Spectroscopy in Turbine Generator Winding Insulations)

  • 김진봉;황돈하;김용주;박명수;김택수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1995년도 하계학술대회 논문집 C
    • /
    • pp.1320-1325
    • /
    • 1995
  • For hydrogen-cooled large turbine generators, partial discharges in ground wall insulations are suppressed by high hydrogen pressure. The first goal of the experiment is to investigate the effect of hydrogen pressure on partial discharge activity and aging rate in turbine generator winding insulations. A series of tests have been performed on two groups of the accelerated aging experiments. The first group of stator windings was aged under hydrogen pressure of 4 atm while the second group of stator windings was aged under air atmosphere. The stator windings aged under air atmosphere suffer from larger partial discharge magnitude with larger voids at high electrical stress than those under hydrogen pressure. The second goal of the experiment is to evaluate the validity of on-line measurement technique which is normally measured under hydrogen environment. The test results show that further experiments are needed to apply the on-line scheme to turbine generator being under high hydrogen pressure.

  • PDF