• 대한조선학회논문집
• /
• 제50권4호
• /
• pp.206-216
• /
• 2013

The present study considers the prediction of wind-induced heel of cruise ship and its stabilization. Wind load in ocean exerts on the surface of superstructure of cruise ship, which causes the heel moment on the ship. The calculation of wind load starts from choosing wind speed profile, so that the logarithmic wind profile model is applied in this study. Heel moment by wind load is calculated by adopting approximate formulation and applied to the ship motion analysis in time domain. Motion stabilizers, such as stabilizing fin and U-tube tank, are considered to reduce the heel effect as well as excessive roll motion. From this study, it is expected that the present method can be applied to the prediction and stabilization of the heel motion of cruise ships.

• Asian Journal of Atmospheric Environment
• /
• 제10권2호
• /
• pp.80-89
• /
• 2016

In the complex terrain where local wind systems are formed, accurate understanding of regional wind variability is required for wind resource assessment. In this paper, cluster analysis based on the similarity of time-series wind vector was applied to classify wind regions with similar wind characteristics and the meteorological validity of regionalization method was evaluated. Wind regions in Jeju Island and Busan were classified using the wind resource map of Korea created by a mesoscale numerical weather prediction modeling. The evaluation was performed by comparing wind speed, wind direction, and wind variability of each wind region. Wind characteristics, such as mean wind speed and prevailing wind direction, in the same wind region were similar and wind characteristics in different wind regions were meteor-statistically distinct. It was able to identify a singular wind region at the top area of Mt. Halla using the inconsistency of wind direction variability. Furthermore, it was found that the regionalization results correspond with the topographic features of Jeju Island and Busan, showing the validity.

• 대기
• /
• 제20권3호
• /
• pp.319-332
• /
• 2010

Sensitivity experiments of WRF model using different planetary boundary layer (PBL) and land surface model (LSM) parameterizations are evaluated for prediction of wind fields within the surface layer. The experiments were performed with three PBL schemes (YSU, Pleim, MYJ) in combination with three land surface models (Noah, RUC, Pleim). The WRF model was conducted on a nested grid from 27-km to 1-km horizontal resolution. The simulations validated wind speed and direction at 10 m and 80 m above ground level at a 1-km spatial resolution over the South Korea. Statistical verification results indicate that Pleim and YSU PBL schemes are in good agreement with observations at 10 m above ground level, while the MYJ scheme produced predictions similar to the observed wind speed at 80 m above ground level. LSM comparisons indicate that the RUC model performs best in predicting 10-m and 80-m wind speed. It is found that MYJ (PBL) - RUC (LSM) simulations yielded the best results for wind field in the surface layer. The choice of PBL and LSM parameterization will contribute to more accurate wind predictions for air quality studies and wind power using WRF.

• 한국해양공학회지
• /
• 제25권2호
• /
• pp.108-112
• /
• 2011

When oil spills occur in the ocean because of a ship collision or grounding, the oil in the sea will spread to the coastline. To effectively and promptly prevent such an oil spread, the prediction of the direction and speed of the spreading oil must be made. By applying the coastal wave diffusion theory with a consideration of the effects of wind and current, the oil spreading direction and speed can be predicted promptly so that the National Disaster Prevention System can effectively and promptly take countermeasures against the attack and contamination of the coastline by such oil bands.

• 한국대기환경학회지
• /
• 제14권6호
• /
• pp.607-620
• /
• 1998

The influence of transportation on air quality has been elevating in urban area. Air pollutants from automobiles cause primary and secondary air pollution, and need to be tightly controlled. In this study, the effect of automobile air pollutants on highway vicinity area was evaluated by the comparison of field measurement. and target was for modeling using CALINE3, NO2 was the target for this work. It was found that the concentration predicted by CALINE3 is overestimated at low wind speed and input data of wind speed requires correction. Based on the measured data, the wind speed was modified by effective wind speed equation [Ue=U+0.24·EXP(-pxU)], and there after the accuracy of CALINE3 calculation was improved neighborhood area of highway. It was also observed that weather conditions and traffic volume affect the concentration of air pollution. Finally, the NO2 effect of automobile air pollutants on the vicinity area of highway proved to be up to 400∼600m from the highway.

• 전기학회논문지P
• /
• 제64권1호
• /
• pp.1-6
• /
• 2015

Factors that have influence on solar power generation are specified into three aspects such as meteorological, geographical factors as well as equipment installation. Meteorological factors influence the most among the three. Insolation, sunshine hours, and cloud directly influence on solar power generation, whereas temperature and wind speed have impacts on equipment installation. This paper provides explanation over temperature-wind speed equation by calculating influence of temperature and wind speed on equipment installation. In order to conduct a research, pyranometer, anemometer, air thermometer, module thermometer are installed in 2MWp solar power plant located in South Cholla province, so that real-time meteorological data and generating amount can be analyzed through monitoring system. Besides, if existing and new methods are applied together, accuracy of prediction for generating amount is improved.

• 한국태양에너지학회 논문집
• /
• 제29권2호
• /
• pp.22-30
• /
• 2009

In order to clarify predictive accuracy for the wind resource predicted by running WindPRO(Ver. 2.5) which is software for wind farm design developed by EMD from Denmark, an investigation was carried out at the northeast region of Jeju island. The Hangwon, Susan and Hoichun sites of Jeju island were selected for this study. The measurement period of wind at the sites was for one year. As a result, when the sites had different energy roses, though the two Wind Statistics made by STATGEN module were used for the prediction, it was difficult to exactly predict the energy rose at a given site. On the other hand, when the two Wind Statistics were used to predict the average wind speed, the wind power density and the annual energy production, the relative error was under ${\pm}20%$ which improved more than that when using only one Wind Statistics.

• 한국농림기상학회지
• /
• 제23권4호
• /
• pp.222-234
• /
• 2021

바람에 의해 해외지역에서 국내로 유입되는 비래해충들은 주요 작물에 상당한 피해를 초래할 수 있다. 바람에 의한 비래해충의 이동 경로를 추정하기 위해 기상 모형들이 사용되는데, 본 연구에서는 비래해충이 도달할 수 있는 지역을 예측할 때 입력설정이 미치는 영향을 분석하였다. 벼멸구가 중국에서 국내로 유입된다는 가정하에 입자의 바람이동 경로를 추적하기 위해 개발된 HYbrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) 모형을 사용하여 바람의 이동경로를 예측하였다. 중국, 한국 및 일본이 포함된 중규모 수치기상모형 자료를 사용하여 순간 및 평균 풍속자료가 포함된 기상입력자료를 생성하였다. 또한, 이동 경로 계산을 위해 계산 시간 간격을 1, 30, 60분으로 설정하였다. 중국에서 벼멸구가 관측된 지점에서 2019년과 2021년 6월 상순 기간 동안 바람의 이동 경로를 계산한 결과, 순간 풍속과 평균 풍속자료를 사용함에 따라 비래해충 도달지점에 큰 차이가 나타났다. 계산 시간에 따른 이동 경로 결과값들의 공간적 분포는 상대적으로 유사도가 높았으며, 순간풍속을 사용한 경우 벼멸구 관측지역과 비교적 유사한 경향이 나타났다. 이러한 결과는 바람 경로를 추적하여 비래해충 도착지점을 추정할 때 사용되는 입력자료의 특성을 파악하고 이들로부터 발생하는 불확도에 대한 고려가 필요함을 시사한다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1465-1469
• /
• 2009

Darrieus wind turbine blade is one of the vertical wind power system in which the lift of blade is used. In the calculation of wind power for the type of that, the multiple streamtubes method is known as an effective method. But it has big difference in the region of higher tip speed ratio because the incoming air velocity is used in the calculation of lift. The incoming air velocity is reduced from inlet to outlet continually by transferring energy to the wind blade. In this study, the air velocity on the blade, which is called blade velocity, is obtained with newly developed algorithm and used to determine the lift. And it is verified that applying blade velocity on the lift calculation cause the power prediction to improve dramatically in the region of higher tip speed ratio.

• 대한환경공학회지
• /
• 제39권12호
• /
• pp.679-684
• /
• 2017

고속열차의 설계 및 운행기술이 발전하면서 고속철도의 운행속도가 빠르게 증속되고 있다. 반면 증속 시 발생하는 소음으로 인해 고속철도 연변의 주거지역 등에서는 많은 소음문제가 발생하고 있으며, 고속철도 소음에 대한 민원도 지속적인 증가추세에 있다. 향후 고속철도가 원활히 설계속도대로 운행되기 위해서는 고속철도의 방사소음특성에 적합한 소음예측기술 및 저감기술이 개발되어야 한다. 이와 같은 요구에 부합하기 위해, 400 km/h 고속철도 인프라 연구가 수년에 걸쳐 진행되었다. 이 연구를 통해 신뢰성을 갖는 고속철도 소음예측평가 기술이 개발되었고, 현재 소음저감기술의 단점을 극복하기 위한 핵심방음장치가 개발되었다. 본 연구의 궁극적인 목적은 고속철도 환경소음을 줄이기 위해 개발된 선로 변 벽체 상단에 설치되는 상단장치의 소음성능평가 및 풍압안전성 검증에 관한 것이다.