• Journal of the Korean Society of Clothing and Textiles
• /
• v.20 no.4
• /
• pp.631-646
• /
• 1996

The purpose of this study was to investigate the difference of visual evaluation about silhouette image. The specific objective were; 1) to construct of silhouette image evaluation instrument using semantic differential scale for the purpose of measuring the width and length; 2) to identify the factor structure of the silhouette; 3) to test the difference of visual perception to the silhouette as the variation of width; 4) to test the difference of visual perception to the silhouette as the variation of length; 5) to test interaction effect between width and length. The major finding were; For the visual evaluation of silhouette as shoulder width variatiorl, there were significant difference in hardness and softness factor. For the hard and soft image, we should express by variation of the shoulder width. For the visual evaluation of silhouette as skirt width variation, there were significant difference in attention factor. For the attensive image, we should express by variation of the skirt width. For the visual evaluation of silhouette as skirt length variation, there were significant difference in activity factor. For the active image, we should express by variation of the skirt length.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1999.08a
• /
• pp.429-437
• /
• 1999

Width variation of the top and bottom ends of steel at finishing rolling in a plate, has been investigated. It was found that width variation after finishing rolling is affected by edging, broadside rolling ratio, longitudinal rolling ratio, width shape after broadside rolling, temperature, width-to-thickness ratio, and so on. A neural network modelling of back propagation has been conducted on the width variation during rolling. Based on these prediction models, a width control system, by which the roll opening and closing of the hydraulic AWC edger can be adjusted during edge rolling in finishing rolling passes, has been developed. Compared to conventional width model, the neural network model is much accurate in a model. The width control system is applied to a newly built production mill.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.1267-1270
• /
• 1998

This paper analyzes the characteristics of wide-band one-shot beam formed by using all sensors of array at once, as variation of weighting width. Gaussian function is applied to each sensor as a role of weighting. As the results of the simulation for nested linear array having 17 sensors for each octave, as the width goes wider the directivity index(DI) becomes lower but more even and the variation of beamwidth becomes smaller. It is confirmed, therefore, that weighting width is carefully decided in consideration of DI level, DI stability and the beamwidth.

• Journal of International Academy of Physical Therapy Research
• /
• v.3 no.1
• /
• pp.391-396
• /
• 2012

The purpose of this study is to identify which width of the base of support(BOS) is safer and more effective in lifting by comparing muscle activations and body sways when lifting objects under the width variation of the BOS. A total of fifteen healthy adults participated in this study. For the width variation of the BOS, the participants changed the width between their feet into three different types(10cm, 32cm, 45cm) and lifted a 10kg four times in each type after going up on a force plate. In order to measure body sways according to the width variation of the BOS, a motion analysis system was used. In addition, in order to measure the muscle activations of lower extremities, including the erector spinae, gluteus maximus, rectus femoris, and tibialis anterior, an electromyogram(EMG) analysis was employed. In addition, the Borg's scale was drawn by quantifying the subjective discomfort levels felt from each width of the BOS. In conclusion, no statistically significant differences according to the width variation of the BOS were observed(p=.295, .308)(p>.05). However, a statistically significant difference was exhibited between the Borg's scale, which indicates the discomfort levels from lifting performances, and the width variation of the BOS (p=$.000^*$).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.1
• /
• pp.135-141
• /
• 2014

In this paper, the device design guideline to reduce the threshold voltage variation with fin width in junctionless MuGFET has been suggested. It has been observed that the threshold voltage variation was increased with increase of fin width in junctionless MuGFETs. To reduce the threshold voltage variation with fin width in junctionless MuGFETs, 3-dimensional device simulation with different gate dielectric materials, silicon film thickness, and an optimized fin number has been performed. The simulation results showed that the threshold voltage variation can be reduced by the gate dielectric materials with a high dielectric constant such as $La_2O_3$ and the silicon film with ultra-thin thickness even though the fin width is increased. Particularly, the reduction of the threshold voltage variation and the subthreshold slope by reducing the fin width and increasing the fin numbers is known the optimized device design guideline in junctionless MuGFETs.

• Journal of Korean Society of Forest Science
• /
• v.26 no.1
• /
• pp.1-6
• /
• 1975

This study was carried out to investigate the variation of fiber tissues of some paper mulberies (Broussnetia kazinoki Sieb.). Every twig was selected for variation from 1 year old to 4 years old of the paper mulberies growing in Woensung, Bounghwa, Euiryung and Wanju in Korea. The results are summarized as follows: 1. The length and the width of fiber tissue increase to old twigs. 2. In primary fiber tissue the variation of length increases considerably slowly, but on the contrary that of width increases very rapidly. 3. In the secondary fiber tissue the variation of length increases comparatively rapidly but that of width does not. 4. In order to investigate the fact shown from the contrary results on the fiber length and width between primary and secondary fibers, the authors calculated the correlation, coefficient and the results show comparatively higher possitive correlation coefficient.

• Journal of Magnetics
• /
• v.12 no.1
• /
• pp.1-6
• /
• 2007

The spin transfer torque generated by a spin-polarized current can induce the shift of the magnetic domain-wall position. In this work, we study theoretically the current-induced domain-wall motion by using the collective coordinate approach [Gen Tatara and Hiroshi Kohno, Phys. Rev. Lett. 92, 86601 (2004)]. The approach is extended to include not only the domain-wall position and the polarization angle changes but also the domain-wall width variation. It is demonstrated that the width variation affects the critical current.

• Journal of Korea Water Resources Association
• /
• v.49 no.7
• /
• pp.635-644
• /
• 2016

This study investigates variation of flow characteristics due to variation of branch channel width and discharge ratio at bifurcation channel using 2D numerical model. The calculated result considering secondary flow is more accurate and stable than without considering one. The diversion flow rate ($Q_3/Q_1$) is reduced by flow stagnation effect according to the interaction of the secondary flow and flow separation zone in branch channel. The less upstream inflow or the lower upstream velocity, the bigger variation of diversion flow rate by changing branch channel width. At uniform downstream boundary condition, the rate of change in Froude number of downstream of main channel($Fr_2$)-diversion flow rate ($Q_3/Q_1$) relations is similar about -2.4843~-2.6675 when branch channel width ratio (b/B) is decreased. At uniform diversion flow rate ($Q_3/Q_1$) condition, the width of recirculation zone in branch channel is decreased when branch channel width ratio (b/B) is decreased. The less upstream inflow in the case of increasing branch channel width or the narrower branch channel width in the case of increasing upstream inflow, the bigger reduction ratio of recirculation zone width. At uniform inflow discharge ($Q_1$) condition, diversion flow rate, the width and length of recirculation zone in branch channel are decreased when branch channel width ratio (b/B) is decreased.

• Journal of Fashion Business
• /
• v.9 no.2
• /
• pp.143-159
• /
• 2005

This study was done to provide basic data for clothing design and thus to contribute to the academic development at the clothing and textile area and collar roll line lay down angle variation at collar width on the open collar. The study was composed as tallows: 1. The variation at collar outer wall size increase collar roll line lay down angle size the more Increase. 2. The outer wall and stand height size increase aware at variation collar width at the more Increase. It is desirable that this study will be at help to enchancement of life style in garments and promotion of garments industury by developing the archetype basic collar pattern suitable to Korean women's garments.

• Journal of the Korean Institute of Educational Facilities
• /
• v.21 no.3
• /
• pp.11-18
• /
• 2014

This study was carried out to observe movement behavior of students about a change of physical condition in moving space of variation type using simulation technique. The moving pattern of students was checked by SIMULEX program. The width of corridor was adjusted to 2.4m, 3.0m and 3.9m and a flow coefficient of simulation was estimated with the change of width. The wider the width of corridor was, the lower a flow coefficient was, and the difference was large when the width of corridor was narrow. It was also observed that the flow coefficient was relatively high in all types of corridor setup individual locker. Unit occupation area with the change of width was additionally measured, as shown in the results, the occupation density was low when the width of corridor was wide and a stationary time was short.