• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.203-206
• /
• 2001

The reduction of chopping noise generated from inverter compressor and the piping design reducing vibration are the most important items in the quality of air conditioner. The chopping noise is identified by the study of the relationship between carrier frequency and natural frequency of the compressor shell. The high carrier frequency is the key factor in reduction of carrier noise. To keep the natural frequencies of the system as far as away from the operating frequencies appears to be the most important factor in the design of piping system.

• 천문학회보
• /
• 제35권2호
• /
• pp.75.2-75.2
• /
• 2010

We have studied the statistical properties of turbulence in molecular clouds identified in the Boston University - Five College Radio Astronomy Observatory (BU-FCRAO) Galactic Ring Survey (GRS). Toward this end, the probability density function (PDF) and velocity distribution were measured for about 50 molecular clouds. We found there exists a good correlation between the PDF width and the velocity dispersion for these molecular clouds. In order to investigate how general properties of astrophysical turbulence depends on the plasma parameters such as magnetic field strength and sonic Mach number, we performed three-dimensional MHD simulations. We then examined if the observed characteristics of interstellar turbulence are consistent with theoretical results from MHD simulations.

• 한국전문물리치료학회지
• /
• 제11권2호
• /
• pp.63-70
• /
• 2004

These were two main purposes of this study. The first was to research the relevance between gross motor function measurement (GMFM) and the spatiotemporal parameters of gait in children with cerebral palsy. The second was to research the relevance between gross motor performance measure (GMPM) and the spatiotemporal gait parameters. Twelve children ($6.0{\pm}1.8$ years) with cerebral palsy participated in this study. GMFM and GMPM were performed and the spatiotemporal parameters of gait were measured by using WalkWay MG-1000. There were no significant correlations between the GMFM score and the stride length, step length, step width, cadence, and velocity (p>.05). The GMPM score also had no significant correlation with the spatiotemporal gait parameter (p>.05).

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.550-554
• /
• 2003

In order to detect very short electromagnetic pulses (EMP) with picosecond width, a receiving antenna with a wide bandwidth and good sensitivity over several GHz is needed. In this paper, the receiving characteristics of various thin wire monopole (or dipole) antennas with nonreflecting resistive loading are analyzed for determining the optimum configurations. This study also indicates that it is possible to choose an ideal load impedance for achieving the required fidelity and sensitivity. The analysis is facilitated by introducing the frequency transfer function.

• Structural Engineering and Mechanics
• /
• 제45권5호
• /
• pp.643-654
• /
• 2013

Optimum cost design of columns subjected to axial force and uniaxial bending moment is presented in this paper. In the formulation of the optimum design problem, the height and width of the column, diameter and number of reinforcement bars are treated as design variables. The design constraints are implemented according to ACI 318-08 and studies in the literature. The objective function is taken as the cost of unit length of the column consisting the cost of concrete, steel, and shuttering. The solution of the design problem is obtained using the artificial bee colony algorithm which is one of the recent additions to metaheuristic techniques. The Artificial Bee Colony Algorithm is imitated the foraging behaviors of bee swarms. In application of this algorithm to the constraint problem, Deb's constraint handling method is used. Obtained results showed that the optimum value of numerical example is nearly same with the existing values in the literature.

• Smart Structures and Systems
• /
• 제18권5호
• /
• pp.911-930
• /
• 2016

The main purpose of this paper is to study the effects of initial stress, gravity, anisotropy and porosity on the propagation of shear wave (SH-waves) in a fiber-reinforced layer placed over a porous media. The frequency equations in a closed form have been derived for SH-waves by applying suitable boundary conditions. The frequency equations have been expanded and approximated up to $2^{nd}$ order of Whittaker's function. It has been observed that the SH-wave velocity decreases as width of fiber-reinforced layer increases. However, with the increase of initial stress, gravity parameter and porosity, the phase velocity increases. The results obtained are in perfect agreement with the standard results investigated by other relevant researchers.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2003년도 춘계학술발표대회 논문집
• /
• pp.202-205
• /
• 2003

Investigated whether fiber orientation situation of fiber reinforcement macromolecule composition board and the fiber inclusion rate are perpendicular and horizontal direction tensile strength and some correlation. Fiber orientation situation of tensile strength of 0 direction of composition board increased changelessly by aeolotropy in isotropy. Tensile strength of 90 direction that is isotropy and tensile strength of 0 direction that is aeolotropy agreed almost. Get into aeolotropy, the reinforcement rate of fiber decreased. When load interacts for width direction of reinforcement.

• Journal of Mechanical Science and Technology
• /
• 제16권4호
• /
• pp.549-556
• /
• 2002

An investigation on the fully developed heat transfer and friction factor characteristics has been made in rectangular ducts with one-side roughened by five different shapes. The effects of rib shape geometries as well as Reynolds numbers are examined. The rib height-to-duct hydraulic diameter, pitch-to-height ratio, and aspect ratio of channel width to height are fixed at e/De=0.0476, P/e=8, and W/H=2.33, respectively. To understand the characteristics of heat transfer enhancements, the friction factors are also measured. The data indicates that the triangular type rib has a substantially higher heat transfer performance than any other ones.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2003년도 추계종합학술대회
• /
• pp.479-482
• /
• 2003

영상으로부터 검출된 에지는 원 영상에 대한 위치와 모양 등에 대한 다양한 정보를 포함하고 있으므로, 이러한 에지를 검출하기 위한 많은 연구가 이루어지고 있다. 그리고, 최근 신호처리 분야의 새로운 기법으로 제시된 웨이브렛 이론들의 발전과 더불어 웨이브렛 변환은 영상의 에지를 포함한 특이점들을 분석하는 분야에 널리 응용되고 있다. 따라서, 본 논문에서는 영상의 라인 폭에 의존하지 않는 웨이브렛 함수를 사용하여, 웨이브렛 변환 데이터의 국부 최대값과 기울기의 방향, 그리고 위치 정보로부터 원 영상의 에지를 검출하였다.

• 한국정보통신학회논문지
• /
• 제8권1호
• /
• pp.213-219
• /
• 2004

본 논문에서는 국부 봉우리와 골에 의한 피치 파라미터와 퍼지를 포함한 화자 인식 알고리즘을 제안한다. 음성의 패턴 인식에서 인식 성능을 저하시키는 시간 변동과 주파수 변동에 대한 문제를 해결하여 피치를 검출한다. 비선형적인 발성 시간에 따른 시간 변동의 폭을 모두 포함하기 위하여 음성 신호의 애매성을 보완할 수 있는 퍼지의 소속 함수를 이용하여 표준 패턴을 작성하고 퍼지 패턴 매칭을 이용하여 인식을 수행한다.