• 한국태양에너지학회 논문집
• /
• 제33권5호
• /
• pp.51-59
• /
• 2013

It is usual to evaluate the performance of the cool roof by measuring in-site rooftop temperature using thermal infra-red camera. The principal advantage of rooftop thermal infrared image acquired in oblique vantage point of super high-rise building as a remote sensor is to provide, in a cost-effective manner, area-wide information required for a scattered rooftop target with different colors, utilizing wide view angle and multi-temporal data coverage. This research idea was formulated by incorporating the concept of traditional remote sensing into rooftop temperature monitoring. Correlations between infrared image of super high-rise building and in-situ data were investigated to compare rooftop surface temperature for a total of four different rooftop locations. The results of the correlations analyses indicate that the rooftop surface temperature by the infrared images of super high-rise building alone could be explained yielding $R^2$ values of 0.951. The visible permanent record of the oblique thermal infra-red image was quite useful in better understanding the nature and extent of rooftop color that occurs in sampling points. This thermal infrared image acquired in oblique vantage point of super high-rise made it possible to identify area wide patterns of rooftop temperature change subject to many different colors, which cannot be acquired by traditional in-site field sampling. The infrared image of super high-rise building breaks down the usual concept of field sampling established as a conventional cool roof performance evaluation technique.

• 한국연소학회지
• /
• 제19권1호
• /
• pp.17-28
• /
• 2014

In this study, the laminar burning velocity of syngas fuel($H_2/CO$) and flame structure with various hydrogen contents were studied using both experimental measurements and detailed kinetic analysis. The laminar burning velocities were measured by the angle method of Bunsen flame configuration and the numerical calculations including chemical kinetic analysis were made using CHEMKIN Package with USC-Mech II. A wide range of syngas mixture compositions such as $H_2$ : CO = 10 : 90, 25 : 75, 50 : 50, 75:25 and equivalence ratios from lean condition of 0.5 to rich condition of 5.0 have been considered. The experimental results of burning velocity were in good agreement with previous other research data and numerical simulation. Also, it was shown that the experimental measurements of laminar burning velocity linearly increased with the increment of $H_2$ content although the burning velocity of hydrogen is faster than the carbon monoxide above 10 times. This phenomenon is attributed to the rapid production of hydrogen related radicals such as H radical at the early stage of combustion, which is confirmed the linear increase of radical concentrations on kinetic analysis. Particular concerns in this study are the characteristics of burning velocity and flame structure different from lean condition for rich condition. The decrease of OH radicals and double peaks are observed with $H_2$ content in rich condition once $H_2$ fraction exceeds over threshold.

• 한국운동역학회지
• /
• 제31권3호
• /
• pp.214-219
• /
• 2021

Objective: The aim of this study was to evaluate the differences in muscle activity of hamstring muscle depending on the position of the feet during Swiss ball hamstring curl exercise. Method: Total of 15 male participants with no history of hamstring muscle injuries and musculoskeletal disorders in the past 6 months were participated in this study (Age: 29.27 ± 4.96 yrs, Height: 173.47 ± 5.18 cm, Body mass: 75.47 ± 12.50 kg). The muscle activation of semitendinosus and biceps femoris with four different feet positions including neutral stance, internal rotation, external rotation, and wide stance were measured during a Swiss ball hamstring curl exercise. For the analysis, the Swiss ball exercise movement comprised of 3 events (90°→ 0°→ 90°) based on the knee angle and 2 phases relative to the mechanism of muscle contraction (eccentric/concentric contraction). To pursue the study goal, an one-way ANOVA with repeated measures was performed with statistical significance as α = 0.05. Results: There was no statistically significant feet position effect found during the Swiss ball hamstring curl with eccentric contraction phase (p>.05). It is, however, semitendinosus showed an enhanced muscle activation in concentric contraction phase, displaying the highest muscle activity in wide stance and the lowest in external rotation (p<.05). Conclusion: Our findings suggest that this exercise can be beneficial in selectively training the semitendinosus. In other words, Swiss ball hamstring curls performed in wide stance strengthens semitendinosus, which improves the stability of knee and are effective in preventing knee injuries and reinforces rehabilitation.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권6호
• /
• pp.102-112
• /
• 2020

본 연구에서는 교량구조물에 활용할 수 있는 폭 100mm 이상의 대형 탄소판을 고정할 수 있는 쐐기형 정착구를 설계하기 위해서, 주요설계변수인 쐐기의 각도, 정착블록-쐐기 사이의 마찰계수 등을 기준으로 거동특성을 수치해석방법으로 분석하였다. 설계변수 별로 탄소판의 응력상태를 계산하고, 복합재료 파괴기준에 의하여 정착구의 극한상태에서의 성능을 평가하였고, 이를 바탕으로 정착구의 최적설계 제원을 결정하였다. 실물실험을 통하여 최적설계된 정착구의 성능을 검증하였으며, 본 연구의 결과는 대형 구조물을 보강하기 위한 탄소판 정착구의 최적설계에 활용될 수 있을 것으로 판단된다.

• 한국의류산업학회지
• /
• 제16권6호
• /
• pp.935-944
• /
• 2014

This study was about to investigate the characteristics of elementary school students' feet growth, comparing and analyzed the measured values and the index values of 3D scan data. As the results from analyzing the measured values, the all measurement items excluding 'Toe 5 angle' showed some significant differences among the age classes, knowing that the elementary school students' feet were continually grown. Although, the items of length, thickness, width, height and circumference indicate some rapid growth of feet at 11 years old, but it appears slowing growth of 'Foot width' after the age of 11 years old. The angle item didn't show any sequential differences according to ages. As the results from analyzing the index values, the children in higher grades have longer 'Toe 5', thicker ankles, wider and thicker the superior part of feet than the children in lower grades. For the superior and the middle part of feet were lowly raised, their Arch height was low and thick. The inferior part of feet showed narrow width and higher height. Giving that the Medial ball width was wide and the Toe 1 angle is high for the children in higher grades, it is expected that the Metatarsophalangeal I might be more projected than that of children in lower grades. Likewise, knowing that the male students' feet shape was bigger than female students' feet from the result that the male students' index values were higher.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 춘계학술대회
• /
• pp.347-350
• /
• 2012

최근 자동차 산업의 활성화로 인해 교통사고 급증이 사회 문제화 되면서 사고를 미연에 방지할 수 있는 운전자 보조 시스템에 관한 연구가 활발하게 이루어지고 있다. 일반적으로 자동차 사고 원인의 70% 이상이 운전자 과실에 의해서 발생되고 전체 추돌사고의 75%가 시속 29km 이하의 속도에서 발생한다는 점을 고려할 때, 이를 예방하기 위해서는 운전자의 인지 판단을 보조하는 시스템의 개발이 필수적이다. 본 논문에서는 가장 많은 추돌사고가 일어나는 저속 주행 및 후진 시에 차량 또는 장애물과의 거리를 실시간으로 감시하는 차량 전 후방 감시 시스템을 구현하였다. 구현된 시스템은 10[m]의 감지거리 및 $10^{\circ}$의 지향각을 갖는 고지향각 초음파 센서, 3[m]의 감지 거리 및 $180^{\circ}$의 지향각을 갖는 광지향각 초음파 센서, ATmel 사의 ATmega128로 구성된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1797-1802
• /
• 2005

In this study, we were developed an accuracy of the proposed two dimensional statical inclinometer what used a position sensitive detector(PSD) by an error analysis. The inclinometer consists of a laser source, a mass, an optic-fiber, and a PSD. The gravity direction on a base platform of the inclinometer is changed by an unknown inclination angle. And a laser spot is moved from the origin to another position of a PSD following a variation of an optical path by the gravity. These processes enable the inclinometer to estimate the inclination angle from distance information of the moving spot. A design methodology on the basis of a sensitivity analysis was applied to improve the measurement performance such as a full measuring range and a resolution. But it still has error factors, so we analyze the uncertainty of the inclinometer to evaluate the systematic errors from alignments, assembly error and so on. The experimental performance evaluation about the design objectives as a measuring range and a resolution was performed. And the validity and the feasibility of the design process were certified by an experimental process. Systematic errors eliminated to improve the accuracy of the inclinometer by the corrected measuring model from the calibration process between the inclination angle and the PSD position instead of the nominal measuring model. The ANOVA(analysis of variance) confirmed the effect of eliminating the systematic errors in the inclinometer. From these methodologies, the proposed inclinometer was able to measure with a high resolution(35.14sec) and a wide range(from $-15^{\circ}\;to\;15^{\circ}$

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1434-1439
• /
• 2004

CFRP composite materials have wide application in structure materials of airplane, ships, and aero space vehicles because of their high strength and stiffness. This paper is to study the effects of curvature and orientation angle on the penetration characteristics of CFRP laminate shell. They are staked with 8 Ply specimens [0$_2$/90$_2$]$_{s}$, [0/90$_2$/0]$_{s}$ and the stacked of outer plates degree with 12 Ply specimens [0$_3$/90$_3$]$_{s}$, [0$_2$/90$_2$/0]$_{s}$ and [90$_3$/0$_3$], [90$_2$/0$_2$/90]S. They are manufactured to varied curvature radius (R=100,150,200mm and $\infty$). They are cured by heating to the appropriate harding temperature(13$0^{\circ}C$) by mean of a heater at the vaccum bag of the autoclave. Test specimens were prepared with dimensions 100mm$\times$140mm. When the specimen is subjected to transverse impact by a steel ball, the velocity of the steel ball was measured both before and after impact by determining the time for it to pass two ballistic-screen sensor located a known distance apart. In general, kinetic energy after impact-kinetic energy before impact rised in all specimens. This study observed a fracture mode inside the specimen after a penetration test using a digital camera and it examined a fracture mode and a penetration mode to stack of outer orientation angle and curvature.rvature.

• 한국통신학회논문지
• /
• 제17권3호
• /
• pp.288-296
• /
• 1992

본 논문에서는 개선된 2D QPS(Quadrature polar separable) 필터의 설계와 조직 프로세싱에 대한 응용이 논의된다. 필터의 커넬쌍은 이산 PSS에 근거한 라디얼 가중 함수와 방향각을 위한 지수 감쇄 함수의 적으로 구성되며 주파수 평면상에서 퀴드래처 극분리형이 된다. 필터는 방향각 함수를 이산 PSS에 근사화시키므로 에너지 손실면에서 최적화된다. 필터의 주파수 특성은 대역폭, 방향각, 감쇄 정수, 그리고 주파수 변이 정수와 같은 설계 명제 조건에 의존하므로 제어가 용이하다. 조직 프로세싱에 대한 필터의 응용으로 조직 영상의 생성, 방향각의 평가, 그리고 합성 조직 영상의 세그멘테이션이 고찰된다. 결과는 넓은 대역폭을 갖는 필터가 강한 방향성 조직의 생성 및 식별에 사용될 수 있다는 것과 세그멘테이션 결과도 효과적임을 보였다.

• 한국강구조학회 논문집
• /
• 제29권6호
• /
• pp.423-434
• /
• 2017

본 논문에서는 반복하중을 받는 부분강접 접합부인 상 하부 ㄱ형강 접합부의 이력거동을 구하기 위하여 체계적인 수치해석이 수행되었다. 이러한 상 하부 ㄱ형강 접합부는 CFT 합성골조의 원상복원 및 충분한 에너지 소산 능력을 확보하기 위하여 초탄성 성질을 갖는 형상기억합금(SMA)으로 제작된 봉과 ㄱ형강이 적용된다. 접합부의 회전강성, 휨모멘트 내력 및 파괴모드를 연구하기 위하여 3차원 비선형 유한요소 해석이 수행되었다. 부가적인 다양한 구조적 거동은 ㄱ형강의 두께 및 강봉 게이지 거리로 상 하부 ㄱ형강 접합의 파라미터에 대한 영향을 설명하고 있다.